Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.
Practice exercise (made-up values, not clinical guidance). A vial contains cefazolin 1000 mg as a powder. The practice label says to add 4.5 mL of sterile water; the powder adds 0.5 mL to the volume. What is the concentration C in mg/mL after reconstitution?
Practice exercise (made-up values, not clinical guidance). You must prepare 1500 mL of 20% dextrose by mixing 50% and 5% dextrose. How many mL V of the 50% solution do you need? Round to the nearest whole mL.
A patient weighs 45 kg. The prescribed dose is 5 mg/kg per day, given in 2 equal doses. How many milligrams D are given per dose?
The prescription is 2300 units of a drug that comes as 5000 units/mL. Draw up the dose in the 1 mL syringe: what volume V do you give?
Infuse 1500 mL over 5 hours with a giving set of 20 gtt/mL. Find the drip rate R in drops per minute.
A bag contains 1000 mg of a drug in 50 mL and runs at 30 mL/h. How many milligrams per hour D does the patient receive?
Practice exercise (made-up values, not clinical guidance). A practice protocol calls for a heparin bolus of 60 units/kg for a patient who weighs 60 kg. The vial contains 5 000 units/mL. What volume V do you draw up? Round to two decimal places.
Practice exercise (made-up values, not clinical guidance). A dobutamine infusion of 250 mg in 250 mL runs at 30 mL/h. The patient weighs 92 kg. What dose D in mcg/kg/min is the patient receiving? Round to one decimal place.
Answer: C = 200 mg/mL
Reconstitution: the powder takes up space, so the final volume is the diluent plus the powder volume. Concentration = drug in the vial/final volume, and the volume to give = dose/concentration. On a multi-strength label, use the concentration that belongs to the amount of diluent you actually added. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Answer: V = 500 mL
Alligation: to mix a higher strength H and a lower strength L into a target strength T, take (T − L) parts of H and (H − T) parts of L. The parts are crossed: each stock gets the distance from the target to the other stock. Water or a plain base counts as 0%. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Check: 500 mL of 50% + 1000 mL of 5% = 1500 mL.
Answer: D = 112.5 mg
Dose calculation: the amount to give equals what is prescribed divided by what you have, times the quantity it comes in: amount = (desired dose/stock strength) × stock volume. Always keep the units the same (convert g to mg, mg to mcg first) and check that the answer is sensible.
Answer: V = 0.46 mL
Drawing up a dose: volume = (prescribed dose/stock strength) × stock volume. Convert to the same units first, then check that the volume fits the syringe and lands on one of its graduations.
On this 1 mL syringe every small line is 0.01 mL.
Answer: R = 100 gtt/min
Infusion rates: a pump is set in mL/h = volume/time in hours. A gravity drip is counted in drops per minute: gtt/min = volume (mL) × drop factor (gtt/mL)/time (min). The drop factor is printed on the tubing package: macrodrip sets deliver 10, 15 or 20 gtt/mL (blood sets often 10 gtt/mL in the US, 15 in the UK) and microdrip sets 60 gtt/mL. Always use the drop factor the question or package gives.
Answer: D = 600 mg/h
Infusion rates: a pump is set in mL/h = volume/time in hours. A gravity drip is counted in drops per minute: gtt/min = volume (mL) × drop factor (gtt/mL)/time (min). The drop factor is printed on the tubing package: macrodrip sets deliver 10, 15 or 20 gtt/mL (blood sets often 10 gtt/mL in the US, 15 in the UK) and microdrip sets 60 gtt/mL. Always use the drop factor the question or package gives.
Answer: V = 0.72 mL
Heparin and insulin infusions: concentration = units in the bag/bag volume (units/mL). Pump rate (mL/h) = units per hour/concentration, and units per hour = mL/h × concentration. For a weight-based order, units/h = units/kg/h × weight first. A bolus volume = units needed/vial strength. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Answer: D = 5.4 mcg/kg/min
Titrated drips: first find the concentration in mcg/mL (mg × 1000/mL). For a weight-based order, mcg/min = mcg/kg/min × weight. Then mL/h = mcg/min × 60/concentration. Working backwards, mcg/kg/min = mL/h × concentration/(60 × weight). The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
This is independent practice material. ExamProblems is not affiliated with or endorsed by the organisation that runs this exam, and the exam name is used only to describe the content. The PTCE is run by the Pharmacy Technician Certification Board (PTCB), which is not affiliated with ExamProblems and does not endorse it.
ExamProblems · examproblems.com/courses/pharmacy-technician-math