Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.
A solution has a ratio strength of 1:10 000. You need 0.4 mg. Draw up the volume in the 10 mL syringe: what volume V is that?
A vial holds 500 mg of powder. You add 9.8 mL of diluent, and the powder adds 0.2 mL of volume. The prescription is 160 mg. Draw up the dose: what volume V do you give?
A child weighing 19 kg is prescribed 4 mg/kg of a drug. The stock solution contains 10 mg/mL. Draw up the dose: what volume V do you give?
An infusion contains 25000 units of a drug in 250 mL. The prescription is 500 units per hour. At what rate R do you set the pump, in mL/h?
Infuse 1000 mL over 6 hours with a giving set of 20 gtt/mL. Find the drip rate R in drops per minute. Round to the nearest whole number.
1500 mL was ordered over 8 hours. After 3 hours you find that 1200 mL is still in the bag, and the order must still finish on time. By what percentage Δ must the original pump rate be increased?
Practice exercise (made-up values, not clinical guidance). A bag contains 12 500 units of heparin in 250 mL. The order is 16 units/kg/h for a patient who weighs 52 kg. At what rate R do you set the pump, in mL/h? Round to one decimal place.
Practice exercise (made-up values, not clinical guidance). A dopamine infusion of 800 mg in 500 mL runs at 5 mL/h. The patient weighs 107 kg. What dose D in mcg/kg/min is the patient receiving? Round to one decimal place.
Answer: V = 4 mL
Strength to volume: turn the strength into mg per mL first. A w/v percentage is grams per 100 mL, so x% = 10x mg/mL. A ratio strength 1:n is 1 g in n mL. After reconstitution the concentration is the powder's dose over the final volume (diluent + powder volume). Then volume = dose/concentration.
Answer: V = 3.2 mL
Strength to volume: turn the strength into mg per mL first. A w/v percentage is grams per 100 mL, so x% = 10x mg/mL. A ratio strength 1:n is 1 g in n mL. After reconstitution the concentration is the powder's dose over the final volume (diluent + powder volume). Then volume = dose/concentration.
Answer: V = 7.6 mL
Drawing up a dose: volume = (prescribed dose/stock strength) × stock volume. Convert to the same units first, then check that the volume fits the syringe and lands on one of its graduations.
On this 10 mL syringe every small line is 0.2 mL.
Answer: R = 5 mL/h
Dose calculation: the amount to give equals what is prescribed divided by what you have, times the quantity it comes in: amount = (desired dose/stock strength) × stock volume. Always keep the units the same (convert g to mg, mg to mcg first) and check that the answer is sensible.
Answer: R = 56 gtt/min
Infusion rates: a pump is set in mL/h = volume/time in hours. A gravity drip is counted in drops per minute: gtt/min = volume (mL) × drop factor (gtt/mL)/time (min). The drop factor is printed on the tubing package: macrodrip sets deliver 10, 15 or 20 gtt/mL (blood sets often 10 gtt/mL in the US, 15 in the UK) and microdrip sets 60 gtt/mL. Always use the drop factor the question or package gives.
At the bedside you round to the nearest whole drop: 56 gtt/min.
Answer: Δ = 28 %
Infusion rates: a pump is set in mL/h = volume/time in hours. A gravity drip is counted in drops per minute: gtt/min = volume (mL) × drop factor (gtt/mL)/time (min). The drop factor is printed on the tubing package: macrodrip sets deliver 10, 15 or 20 gtt/mL (blood sets often 10 gtt/mL in the US, 15 in the UK) and microdrip sets 60 gtt/mL. Always use the drop factor the question or package gives.
This is more than a 25% increase: most hospitals require you to contact the prescriber instead of catching up, and to assess the patient for fluid overload.
Answer: R = 16.6 mL/h
Heparin and insulin infusions: concentration = units in the bag/bag volume (units/mL). Pump rate (mL/h) = units per hour/concentration, and units per hour = mL/h × concentration. For a weight-based order, units/h = units/kg/h × weight first. A bolus volume = units needed/vial strength. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Answer: D = 1.2 mcg/kg/min
Titrated drips: first find the concentration in mcg/mL (mg × 1000/mL). For a weight-based order, mcg/min = mcg/kg/min × weight. Then mL/h = mcg/min × 60/concentration. Working backwards, mcg/kg/min = mL/h × concentration/(60 × weight). The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
This is independent practice material. ExamProblems is not affiliated with or endorsed by the organisation that runs this exam, and the exam name is used only to describe the content. The PTCE is run by the Pharmacy Technician Certification Board (PTCB), which is not affiliated with ExamProblems and does not endorse it.
ExamProblems · examproblems.com/courses/pharmacy-technician-math