Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.
A solution has a ratio strength of 1:10 000. You need 0.26 mg. Draw up the volume in the 10 mL syringe: what volume V is that?
Practice exercise (made-up values, not clinical guidance). You must prepare 250 mL of 13% sodium chloride by mixing 23% and 3% sodium chloride. How many mL V of the 3% solution do you need? Round to the nearest whole mL.
A patient weighs 90 kg. The prescribed dose is 5 mg/kg per day, given in 3 equal doses. How many milligrams D are given per dose?
The prescription is 4200 units of a drug that comes as 5000 units/mL. Draw up the dose in the 1 mL syringe: what volume V do you give?
Infuse 500 mL over 2 hours with a giving set of 20 gtt/mL. Find the drip rate R in drops per minute. Round to the nearest whole number.
1500 mL was ordered over 10 hours. After 4 hours you find that 1080 mL is still in the bag, and the order must still finish on time. By what percentage Δ must the original pump rate be increased?
Practice exercise (made-up values, not clinical guidance). A practice protocol calls for a heparin bolus of 80 units/kg for a patient who weighs 54 kg. The vial contains 1 000 units/mL. What volume V do you draw up? Round to one decimal place.
Practice exercise (made-up values, not clinical guidance). A patient who weighs 82 kg has an order for norepinephrine at 10 mcg/min. The bag contains 4 mg in 250 mL. Find the pump rate R in mL/h. Round to one decimal place.
Answer: V = 2.6 mL
Strength to volume: turn the strength into mg per mL first. A w/v percentage is grams per 100 mL, so x% = 10x mg/mL. A ratio strength 1:n is 1 g in n mL. After reconstitution the concentration is the powder's dose over the final volume (diluent + powder volume). Then volume = dose/concentration.
Answer: V = 125 mL
Alligation: to mix a higher strength H and a lower strength L into a target strength T, take (T − L) parts of H and (H − T) parts of L. The parts are crossed: each stock gets the distance from the target to the other stock. Water or a plain base counts as 0%. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Check: 125 mL of 23% + 125 mL of 3% = 250 mL.
Answer: D = 150 mg
Dose calculation: the amount to give equals what is prescribed divided by what you have, times the quantity it comes in: amount = (desired dose/stock strength) × stock volume. Always keep the units the same (convert g to mg, mg to mcg first) and check that the answer is sensible.
Answer: V = 0.84 mL
Drawing up a dose: volume = (prescribed dose/stock strength) × stock volume. Convert to the same units first, then check that the volume fits the syringe and lands on one of its graduations.
On this 1 mL syringe every small line is 0.01 mL.
Answer: R = 83 gtt/min
Infusion rates: a pump is set in mL/h = volume/time in hours. A gravity drip is counted in drops per minute: gtt/min = volume (mL) × drop factor (gtt/mL)/time (min). The drop factor is printed on the tubing package: macrodrip sets deliver 10, 15 or 20 gtt/mL (blood sets often 10 gtt/mL in the US, 15 in the UK) and microdrip sets 60 gtt/mL. Always use the drop factor the question or package gives.
At the bedside you round to the nearest whole drop: 83 gtt/min.
Answer: Δ = 20 %
Infusion rates: a pump is set in mL/h = volume/time in hours. A gravity drip is counted in drops per minute: gtt/min = volume (mL) × drop factor (gtt/mL)/time (min). The drop factor is printed on the tubing package: macrodrip sets deliver 10, 15 or 20 gtt/mL (blood sets often 10 gtt/mL in the US, 15 in the UK) and microdrip sets 60 gtt/mL. Always use the drop factor the question or package gives.
Many hospitals allow such an adjustment up to 25% without a new order; check local policy.
Answer: V = 4.3 mL
Heparin and insulin infusions: concentration = units in the bag/bag volume (units/mL). Pump rate (mL/h) = units per hour/concentration, and units per hour = mL/h × concentration. For a weight-based order, units/h = units/kg/h × weight first. A bolus volume = units needed/vial strength. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Answer: R = 37.5 mL/h
Titrated drips: first find the concentration in mcg/mL (mg × 1000/mL). For a weight-based order, mcg/min = mcg/kg/min × weight. Then mL/h = mcg/min × 60/concentration. Working backwards, mcg/kg/min = mL/h × concentration/(60 × weight). The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
The order is per minute for the whole patient, so the weight is not needed.
This is independent practice material. ExamProblems is not affiliated with or endorsed by the organisation that runs this exam, and the exam name is used only to describe the content. The PTCE is run by the Pharmacy Technician Certification Board (PTCB), which is not affiliated with ExamProblems and does not endorse it.
ExamProblems · examproblems.com/courses/pharmacy-technician-math