Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.
A solution has a ratio strength of 1:10 000. You need 0.22 mg. Draw up the volume in the 10 mL syringe: what volume V is that?
A vial holds 500 mg of powder. You add 3.5 mL of diluent, and the powder adds 0.5 mL of volume. The prescription is 162.5 mg. Draw up the dose: what volume V do you give?
A child weighing 25 kg is prescribed 2 mg/kg of a drug. The stock solution contains 10 mg/mL. Draw up the dose: what volume V do you give?
A patient weighs 101.2 lb. The prescription is 10 mg/kg as a single dose, and the stock contains 40 mg in 1 mL. Using 1 kg = 2.2 lb, what volume V do you give?
A drip runs at 60 gtt/min through a set of 60 gtt/mL. How many millilitres V does the patient receive in 4 hours?
250 mg of a drug is diluted in 250 mL and given by gravity through a set of 60 gtt/mL. The order is 100 mg per hour. Find the drip rate R in drops per minute.
Practice exercise (made-up values, not clinical guidance). A bag contains 25 000 units of heparin in 250 mL. The order is 18 units/kg/h for a patient who weighs 94 kg. At what rate R do you set the pump, in mL/h? Round to one decimal place.
Practice exercise (made-up values, not clinical guidance). A patient who weighs 99 kg has an order for norepinephrine at 10 mcg/min. The bag contains 8 mg in 250 mL. Find the pump rate R in mL/h. Round to one decimal place.
Answer: V = 2.2 mL
Strength to volume: turn the strength into mg per mL first. A w/v percentage is grams per 100 mL, so x% = 10x mg/mL. A ratio strength 1:n is 1 g in n mL. After reconstitution the concentration is the powder's dose over the final volume (diluent + powder volume). Then volume = dose/concentration.
Answer: V = 1.3 mL
Strength to volume: turn the strength into mg per mL first. A w/v percentage is grams per 100 mL, so x% = 10x mg/mL. A ratio strength 1:n is 1 g in n mL. After reconstitution the concentration is the powder's dose over the final volume (diluent + powder volume). Then volume = dose/concentration.
Answer: V = 5 mL
Drawing up a dose: volume = (prescribed dose/stock strength) × stock volume. Convert to the same units first, then check that the volume fits the syringe and lands on one of its graduations.
On this 10 mL syringe every small line is 0.2 mL.
Answer: V = 11.5 mL
Dose calculation: the amount to give equals what is prescribed divided by what you have, times the quantity it comes in: amount = (desired dose/stock strength) × stock volume. Always keep the units the same (convert g to mg, mg to mcg first) and check that the answer is sensible.
Answer: V = 240 mL
Infusion rates: a pump is set in mL/h = volume/time in hours. A gravity drip is counted in drops per minute: gtt/min = volume (mL) × drop factor (gtt/mL)/time (min). The drop factor is printed on the tubing package: macrodrip sets deliver 10, 15 or 20 gtt/mL (blood sets often 10 gtt/mL in the US, 15 in the UK) and microdrip sets 60 gtt/mL. Always use the drop factor the question or package gives.
Answer: R = 100 gtt/min
Dose-based infusions: concentration = amount of drug in the bag/bag volume. Pump rate (mL/h) = dose per hour/concentration, and dose per hour = mL/h × concentration. Convert per-minute doses to per-hour (× 60) and keep the mass units the same (1 g = 1000 mg, 1 mg = 1000 mcg).
Answer: R = 16.9 mL/h
Heparin and insulin infusions: concentration = units in the bag/bag volume (units/mL). Pump rate (mL/h) = units per hour/concentration, and units per hour = mL/h × concentration. For a weight-based order, units/h = units/kg/h × weight first. A bolus volume = units needed/vial strength. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Answer: R = 18.8 mL/h
Titrated drips: first find the concentration in mcg/mL (mg × 1000/mL). For a weight-based order, mcg/min = mcg/kg/min × weight. Then mL/h = mcg/min × 60/concentration. Working backwards, mcg/kg/min = mL/h × concentration/(60 × weight). The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
The order is per minute for the whole patient, so the weight is not needed.
This is independent practice material. ExamProblems is not affiliated with or endorsed by the organisation that runs this exam, and the exam name is used only to describe the content. The PTCE is run by the Pharmacy Technician Certification Board (PTCB), which is not affiliated with ExamProblems and does not endorse it.
ExamProblems · examproblems.com/courses/pharmacy-technician-math