Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.
Practice exercise (made-up values, not clinical guidance). A vial contains ampicillin 500 mg as a powder. The practice label says to add 1.8 mL of sterile water; the powder adds 0.2 mL to the volume. What is the concentration C in mg/mL after reconstitution?
Practice exercise (made-up values, not clinical guidance). You must prepare 200 mL of 25% dextrose by mixing 70% and 10% dextrose. How many mL V of the 70% solution do you need? Round to the nearest whole mL.
A child weighing 36 kg is prescribed 5 mg/kg of a drug. The stock solution contains 50 mg/mL. Draw up the dose: what volume V do you give?
A patient is 177 cm tall and weighs 64 kg. The prescription is 100 mg/m². Using the Mosteller formula BSA = √(height (cm) × weight (kg)/3600), find the dose D in mg.
A drip runs at 75 gtt/min through a set of 60 gtt/mL. How many millilitres V does the patient receive in 4 hours?
A bag contains 250 mg of a drug in 500 mL and runs at 15 mL/h. How many milligrams per hour D does the patient receive?
Practice exercise (made-up values, not clinical guidance). An infusion contains 250 units of regular insulin in 250 mL. The order is 0.1 units/kg/h for a patient who weighs 99 kg. Find the pump rate R in mL/h. Round to one decimal place.
Practice exercise (made-up values, not clinical guidance). A bag contains dobutamine 500 mg in 250 mL. The order is 10 mcg/kg/min for a patient who weighs 91 kg. At what rate R do you set the pump, in mL/h? Round to one decimal place.
Answer: C = 250 mg/mL
Reconstitution: the powder takes up space, so the final volume is the diluent plus the powder volume. Concentration = drug in the vial/final volume, and the volume to give = dose/concentration. On a multi-strength label, use the concentration that belongs to the amount of diluent you actually added. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Answer: V = 50 mL
Alligation: to mix a higher strength H and a lower strength L into a target strength T, take (T − L) parts of H and (H − T) parts of L. The parts are crossed: each stock gets the distance from the target to the other stock. Water or a plain base counts as 0%. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Check: 50 mL of 70% + 150 mL of 10% = 200 mL.
Answer: V = 3.6 mL
Drawing up a dose: volume = (prescribed dose/stock strength) × stock volume. Convert to the same units first, then check that the volume fits the syringe and lands on one of its graduations.
On this 10 mL syringe every small line is 0.2 mL.
Answer: D = 177.4 mg
Body-surface-area dosing: many cytotoxic and some paediatric doses are prescribed per square metre of body surface area: dose (mg) = dose per m² × BSA (m²). The Mosteller formula estimates BSA = √(height (cm) × weight (kg)/3600).
Answer: V = 300 mL
Infusion rates: a pump is set in mL/h = volume/time in hours. A gravity drip is counted in drops per minute: gtt/min = volume (mL) × drop factor (gtt/mL)/time (min). The drop factor is printed on the tubing package: macrodrip sets deliver 10, 15 or 20 gtt/mL (blood sets often 10 gtt/mL in the US, 15 in the UK) and microdrip sets 60 gtt/mL. Always use the drop factor the question or package gives.
Answer: D = 7.5 mg/h
Infusion rates: a pump is set in mL/h = volume/time in hours. A gravity drip is counted in drops per minute: gtt/min = volume (mL) × drop factor (gtt/mL)/time (min). The drop factor is printed on the tubing package: macrodrip sets deliver 10, 15 or 20 gtt/mL (blood sets often 10 gtt/mL in the US, 15 in the UK) and microdrip sets 60 gtt/mL. Always use the drop factor the question or package gives.
Answer: R = 9.9 mL/h
Heparin and insulin infusions: concentration = units in the bag/bag volume (units/mL). Pump rate (mL/h) = units per hour/concentration, and units per hour = mL/h × concentration. For a weight-based order, units/h = units/kg/h × weight first. A bolus volume = units needed/vial strength. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Answer: R = 27.3 mL/h
Titrated drips: first find the concentration in mcg/mL (mg × 1000/mL). For a weight-based order, mcg/min = mcg/kg/min × weight. Then mL/h = mcg/min × 60/concentration. Working backwards, mcg/kg/min = mL/h × concentration/(60 × weight). The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
This is independent practice material. ExamProblems is not affiliated with or endorsed by the organisation that runs this exam, and the exam name is used only to describe the content. The PTCE is run by the Pharmacy Technician Certification Board (PTCB), which is not affiliated with ExamProblems and does not endorse it.
ExamProblems · examproblems.com/courses/pharmacy-technician-math