Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.
Practice exercise (made-up values, not clinical guidance). A vial contains ceftriaxone 2000 mg as a powder. The practice label says to add 19.2 mL of sterile water; the powder adds 0.8 mL to the volume. The prescribed dose is 800 mg. What volume V do you draw up? Round to one decimal place.
A vial holds 1000 mg of powder. You add 3.5 mL of diluent, and the powder adds 0.5 mL of volume. The prescription is 850 mg. Draw up the dose: what volume V do you give?
A vial contains 2 g of powder. The label says: add 7.4 mL of water for injection to give a total volume of 8 mL. The prescription is 150 mg. What volume V of the reconstituted solution do you give?
You must prepare 1000 mL of a 1% (w/v) solution from a 50% (w/v) stock solution. What volume of stock V₁ do you need?
An infusion is ordered at 120 mL/h, but no pump is available. It runs by gravity through a giving set of 15 gtt/mL. Find the drip rate R in drops per minute.
250 mg of a drug is diluted in 250 mL and given by gravity through a set of 60 gtt/mL. The order is 50 mg per hour. Find the drip rate R in drops per minute.
Practice exercise (made-up values, not clinical guidance). A bag contains 12 500 units of heparin in 250 mL. The order is 15 units/kg/h for a patient who weighs 99 kg. At what rate R do you set the pump, in mL/h? Round to one decimal place.
Practice exercise (made-up values, not clinical guidance). A patient who weighs 73 kg has an order for nitroglycerin at 50 mcg/min. The bag contains 50 mg in 250 mL. Find the pump rate R in mL/h. Round to one decimal place.
Answer: V = 8 mL
Reconstitution: the powder takes up space, so the final volume is the diluent plus the powder volume. Concentration = drug in the vial/final volume, and the volume to give = dose/concentration. On a multi-strength label, use the concentration that belongs to the amount of diluent you actually added. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Answer: V = 3.4 mL
Strength to volume: turn the strength into mg per mL first. A w/v percentage is grams per 100 mL, so x% = 10x mg/mL. A ratio strength 1:n is 1 g in n mL. After reconstitution the concentration is the powder's dose over the final volume (diluent + powder volume). Then volume = dose/concentration.
Answer: V = 0.6 mL
Dose calculation: the amount to give equals what is prescribed divided by what you have, times the quantity it comes in: amount = (desired dose/stock strength) × stock volume. Always keep the units the same (convert g to mg, mg to mcg first) and check that the answer is sensible.
Answer: V₁ = 20 mL
Solution strengths: a percentage strength is grams per 100 mL, so 1% = 1 g/100 mL = 10 mg/mL. A ratio strength 1:1000 means 1 g in 1000 mL = 1 mg/mL; 1:10 000 is 0.1 mg/mL. For a dilution the amount of drug stays the same: C₁·V₁ = C₂·V₂.
Answer: R = 30 gtt/min
Infusion rates: a pump is set in mL/h = volume/time in hours. A gravity drip is counted in drops per minute: gtt/min = volume (mL) × drop factor (gtt/mL)/time (min). The drop factor is printed on the tubing package: macrodrip sets deliver 10, 15 or 20 gtt/mL (blood sets often 10 gtt/mL in the US, 15 in the UK) and microdrip sets 60 gtt/mL. Always use the drop factor the question or package gives.
Answer: R = 50 gtt/min
Dose-based infusions: concentration = amount of drug in the bag/bag volume. Pump rate (mL/h) = dose per hour/concentration, and dose per hour = mL/h × concentration. Convert per-minute doses to per-hour (× 60) and keep the mass units the same (1 g = 1000 mg, 1 mg = 1000 mcg).
Answer: R = 29.7 mL/h
Heparin and insulin infusions: concentration = units in the bag/bag volume (units/mL). Pump rate (mL/h) = units per hour/concentration, and units per hour = mL/h × concentration. For a weight-based order, units/h = units/kg/h × weight first. A bolus volume = units needed/vial strength. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Answer: R = 15 mL/h
Titrated drips: first find the concentration in mcg/mL (mg × 1000/mL). For a weight-based order, mcg/min = mcg/kg/min × weight. Then mL/h = mcg/min × 60/concentration. Working backwards, mcg/kg/min = mL/h × concentration/(60 × weight). The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
The order is per minute for the whole patient, so the weight is not needed.
This is independent practice material. ExamProblems is not affiliated with or endorsed by the organisation that runs this exam, and the exam name is used only to describe the content. The PTCE is run by the Pharmacy Technician Certification Board (PTCB), which is not affiliated with ExamProblems and does not endorse it.
ExamProblems · examproblems.com/courses/pharmacy-technician-math