Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.
A solution has a ratio strength of 1:10 000. You need 0.66 mg. Draw up the volume in the 10 mL syringe: what volume V is that?
A vial holds 500 mg of powder. You add 4.2 mL of diluent, and the powder adds 0.8 mL of volume. The prescription is 110 mg. Draw up the dose: what volume V do you give?
A patient weighing 77 kg has a body surface area of 1.68 m². The prescription is 135 mg/m². Find the dose D in mg.
The prescription is 305 micrograms. The ampoule contains 0.5 mg/mL. Draw up the dose in the 1 mL syringe: what volume V do you give?
An infusion is ordered at 30 mL/h, but no pump is available. It runs by gravity through a giving set of 60 gtt/mL. Find the drip rate R in drops per minute.
A drip runs at 28 gtt/min through a set of 15 gtt/mL. There are 400 mL left in the bag. How many hours t until it is empty? Round to one decimal place.
Practice exercise (made-up values, not clinical guidance). A bag contains 25 000 units of heparin in 500 mL. The order is 18 units/kg/h for a patient who weighs 63 kg. At what rate R do you set the pump, in mL/h? Round to one decimal place.
Practice exercise (made-up values, not clinical guidance). A patient who weighs 64 kg has an order for nitroglycerin at 20 mcg/min. The bag contains 25 mg in 250 mL. Find the pump rate R in mL/h. Round to one decimal place.
Answer: V = 6.6 mL
Strength to volume: turn the strength into mg per mL first. A w/v percentage is grams per 100 mL, so x% = 10x mg/mL. A ratio strength 1:n is 1 g in n mL. After reconstitution the concentration is the powder's dose over the final volume (diluent + powder volume). Then volume = dose/concentration.
Answer: V = 1.1 mL
Strength to volume: turn the strength into mg per mL first. A w/v percentage is grams per 100 mL, so x% = 10x mg/mL. A ratio strength 1:n is 1 g in n mL. After reconstitution the concentration is the powder's dose over the final volume (diluent + powder volume). Then volume = dose/concentration.
Answer: D = 226.8 mg
Body-surface-area dosing: many cytotoxic and some paediatric doses are prescribed per square metre of body surface area: dose (mg) = dose per m² × BSA (m²). The Mosteller formula estimates BSA = √(height (cm) × weight (kg)/3600).
Answer: V = 0.61 mL
Drawing up a dose: volume = (prescribed dose/stock strength) × stock volume. Convert to the same units first, then check that the volume fits the syringe and lands on one of its graduations.
Answer: R = 30 gtt/min
Infusion rates: a pump is set in mL/h = volume/time in hours. A gravity drip is counted in drops per minute: gtt/min = volume (mL) × drop factor (gtt/mL)/time (min). The drop factor is printed on the tubing package: macrodrip sets deliver 10, 15 or 20 gtt/mL (blood sets often 10 gtt/mL in the US, 15 in the UK) and microdrip sets 60 gtt/mL. Always use the drop factor the question or package gives.
With a microdrip set (60 gtt/mL), gtt/min equals mL/h.
Answer: t = 3.6 h
Infusion rates: a pump is set in mL/h = volume/time in hours. A gravity drip is counted in drops per minute: gtt/min = volume (mL) × drop factor (gtt/mL)/time (min). The drop factor is printed on the tubing package: macrodrip sets deliver 10, 15 or 20 gtt/mL (blood sets often 10 gtt/mL in the US, 15 in the UK) and microdrip sets 60 gtt/mL. Always use the drop factor the question or package gives.
Answer: R = 22.7 mL/h
Heparin and insulin infusions: concentration = units in the bag/bag volume (units/mL). Pump rate (mL/h) = units per hour/concentration, and units per hour = mL/h × concentration. For a weight-based order, units/h = units/kg/h × weight first. A bolus volume = units needed/vial strength. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Answer: R = 12 mL/h
Titrated drips: first find the concentration in mcg/mL (mg × 1000/mL). For a weight-based order, mcg/min = mcg/kg/min × weight. Then mL/h = mcg/min × 60/concentration. Working backwards, mcg/kg/min = mL/h × concentration/(60 × weight). The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
The order is per minute for the whole patient, so the weight is not needed.
This is independent practice material. ExamProblems is not affiliated with or endorsed by the organisation that runs this exam, and the exam name is used only to describe the content. The PTCE is run by the Pharmacy Technician Certification Board (PTCB), which is not affiliated with ExamProblems and does not endorse it.
ExamProblems · examproblems.com/courses/pharmacy-technician-math