Convert units: nm, mm and cm to m, and check whether angles are measured from the normal.
Check signs and plausibility: a virtual image has dᵢ < 0, an approaching source sounds higher, a closed pipe has only odd harmonics.
2Practice problems
1.KinematicsMedium
A car driving at 120 km/h brakes with a constant deceleration of 3 m/s² until it stops. How long does braking take? Find t.
v₀ = 120 km/ha = −3 m/s²v = 0
t = s
2.KinematicsHard
A ball is thrown straight up at 18 m/s from the edge of a roof 25 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.
v₀ = 18 m/sh₀ = 25 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
A 14 kg block slides down a slope at 20° to the horizontal. The coefficient of kinetic friction is 0.3. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.
m = 14 kgθ = 20°μ = 0.3g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
A 7.5 kg block on a ramp at 25° is connected by a light string over a frictionless pulley at the top of the ramp to a hanging 9 kg mass. The hanging mass moves down. The coefficient of kinetic friction between block and ramp is 0.15. Use g = 9.81 m/s². Find the tension T in the string.
m1 = 7.5 kgm2 = 9 kgθ = 25°μ = 0.15g = 9.81 m/s²
T = N
5.Projectile motionMedium
A ball is launched at 60° above horizontal from level ground. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.
v0 = 10 m/sθ = 60°g = 9.81 m/s²
x = m
6.Projectile motionHard
A ball is launched at 30° above horizontal from the top of a 55 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.
v0 = 29 m/sθ = 30°h = 55 mg = 9.81 m/s²
t = s
7.Circular motionMedium
A car takes a flat curve of radius 45 m. The coefficient of static friction between tyres and road is 0.5. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.
r = 45 mμs = 0.5g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
A 5 kg cart is released from rest at a height of 32.3 m on a frictionless track and runs through a vertical loop of radius 9.5 m. Use g = 9.81 m/s². Find the normal force Ntop of the track on the cart at the top of the loop.
m = 5 kgh = 32.3 mR = 9.5 mg = 9.81 m/s²
Ntop = N
9.Work & energyMedium
A 1 kg ball hangs on a light string of length 1 m. It is pulled aside until the string makes 40° with the vertical and released from rest. Find the tension T in the string when the ball passes the lowest point.
m = 1 kgL = 1 mθ = 40°g = 9.81 m/s²
T = N
10.Work & energyHard
A 0.5 kg block is released from rest at height 2.5 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 1.5 m long (μ = 0.2) and then runs onto a spring (k = 4000 N/m) on a smooth surface. Find the maximum compression x of the spring.
m = 0.5 kgh = 2.5 mL = 1.5 mμ = 0.2k = 4000 N/mg = 9.81 m/s²
x = cm
11.Momentum & collisionsMedium
A 4.5 kg glider moving at 4 m/s makes a perfectly elastic head-on collision with a 1.5 kg glider at rest on a frictionless track. Find the velocity v′2 of the second glider after the collision.
m1 = 4.5 kgm2 = 1.5 kgv1 = 4 m/sv2 = 0
v′2 = m/s
12.Momentum & collisionsHard
A 0.25 kg ball hits a wall at 20 m/s and bounces straight back at 8 m/s. The contact lasts 40 ms. Find the average force Favg of the wall on the ball.
m = 0.25 kgvin = 20 m/svout = 8 m/sΔt = 40 ms
Favg = N
13.Springs & pendulumsMedium
A 2.2 kg mass on a spring with k = 210 N/m is pulled 13 cm in the positive direction and released from rest at t = 0. Find its displacement x from equilibrium at t = 1.1 s (with sign).
m = 2.2 kgk = 210 N/mA = 13 cmt = 1.1 s
x = cm
14.Springs & pendulumsHard
An 8 g bullet moving at 500 m/s hits and stays in a 4 kg block resting on a frictionless surface. The block is attached to a horizontal spring with k = 800 N/m. Find the amplitude A of the resulting oscillation in cm.
m = 8 gv = 500 m/sM = 4 kgk = 800 N/m
A = cm
15.Waves, sound & opticsMedium
A source of 1200 Hz moves at 10 m/s away from a stationary observer. The speed of sound is 343 m/s. Find the frequency f′ that the observer hears.
f = 1200 Hzv = 343 m/svs = 10 m/s
f′ = Hz
16.Waves, sound & opticsHard
Light of wavelength 480 nm falls on two slits 0.3 mm apart. The screen is 3 m away. Find the distance y4 from the central bright fringe to bright fringe number 4.
λ = 480 nmd = 0.3 mmL = 3 mm = 4
y4 = mm
3Solutions
1.Kinematics
Answer: t = 11.11 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v₀ = 120/3.6 = 33.33 m/s
Braking time
0 = v₀ − a·t → t = v₀/a = 33.33/3 = 11.11 s
Answer
t = 11.11 s
2.Kinematics
Answer: t = 4.744 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equation of motion
Up is positive and the ground is h₀ below the starting point.
−25 = 18·t − ½·9.81·t²
4.905·t² − 18·t − 25 = 0
Solve the quadratic
Only the positive root is physical.
t = (18 + √(18² + 2·9.81·25))/9.81 = 4.744 s
Answer
t = 4.744 s
3.Newton’s laws
Answer: a = 0.5897 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Forces along the string
m₂·g = 88.29 N
m₁·g·sin θ = 31.09 N
μ·m₁·g·cos θ = 10 N
Acceleration of the system
a = (88.29 − 31.09 − 10)/16.5 = 2.86 m/s²
Tension from the hanging mass
m2·g − T = m2·a → T = 9·(9.81 − 2.86) = 62.55 N
Answer
T = 62.55 N
5.Projectile motion
Answer: x = 8.828 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 10·cos 60° = 5 m/s
vy = v0·sin θ = 10·sin 60° = 8.66 m/s
Time in the air
Starting and landing at the same height: t = 2vy/g.
t = 2·8.66/9.81 = 1.766 s
Horizontal distance
x = vx·t = 5·1.766 = 8.828 m
Answer
x = 8.828 m
6.Projectile motion
Answer: t = 5.138 s
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 29·cos 30° = 25.11 m/s
vy = v0·sin θ = 29·sin 30° = 14.5 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 55 + 14.5·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (14.5 + √(210.2 + 1079))/9.81 = 5.138 s
Answer
t = 5.138 s
7.Circular motion
Answer: vmax = 14.86 m/s
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Friction provides the centripetal force
m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.5·9.81·45) = 14.86 m/s
Answer
vmax = 14.86 m/s (53.48 km/h)
8.Circular motion
Answer: Ntop = 88.29 N
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Speed from energy conservation
v² = 2·9.81·(32.3 − 2·9.5) = 260.9 m²/s²
Forces
Towards the centre is positive.
N = m·v²/R − m·g = 5·260.9/9.5 − 49.05 = 88.29 N
Answer
Ntop = 88.29 N
9.Work & energy
Answer: T = 14.4 N
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.
Speed at the bottom
v² = 2gL(1 − cos θ) = 2·9.81·1·(1 − cos 40°) = 4.59 m²/s²
Forces at the bottom
m·g = 1·9.81 = 9.81 N
T = mg + mv²/L = 9.81 + 1·4.59/1 = 14.4 N
Answer
T = 14.4 N
Check: T = mg(3 − 2cos θ) = 14.4 N.
10.Work & energy
Answer: x = 7.345 cm
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy left after the rough strip
The ramp is smooth, so only the strip removes energy.
mgh − μmgL = 4.905·(2.5 − 0.2·1.5) = 10.79 J
Maximum compression
½kx² = 10.79 → x = √(2·10.79/4000) = 0.07345 m = 7.345 cm
Answer
x = 7.345 cm
11.Momentum & collisions
Answer: v′2 = 6 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Elastic collision with a target at rest
Solving momentum and energy conservation together gives these two results.
v′1 = (4.5 − 1.5)/(4.5 + 1.5)·4 = 2 m/s
v′2 = 2·4.5/(4.5 + 1.5)·4 = 6 m/s
Answer
v′2 = 6 m/s
12.Momentum & collisions
Answer: Favg = 175 N
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Change in momentum
J = m·Δv = 0.25·(8 + 20) = 7 N·s
Average force
Favg = J/Δt = 7/0.04 = 175 N
Answer
Favg = 175 N
13.Springs & pendulums
Answer: x = −3.197 cm
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Angular frequency
ω = √(210/2.2) = 9.77 rad/s
ω·t = 9.77·1.1 = 10.75 rad
Displacement
x = A·cos(ω·t) = 13·cos(10.75) = −3.197 cm
Answer
x = −3.197 cm
14.Springs & pendulums
Answer: A = 7.064 cm
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Speed after impact
V = m·v/(m + M) = 0.008·500/4.008 = 0.998 m/s
Angular frequency
ω = √(k/(m + M)) = √(800/4.008) = 14.13 rad/s
Amplitude
A = V/ω = 0.998/14.13 = 0.07064 m = 7.064 cm
Answer
A = 7.064 cm
15.Waves, sound & optics
Answer: f′ = 1166 Hz
Standing waves and the Doppler effect: a string fixed at both ends, or a pipe open at both ends, fits whole half-wavelengths: L = nλ/2, fn = n·v/(2L), n = 1, 2, 3, … A pipe closed at one end has a node at the closed end and an antinode at the open end: L = nλ/4 with odd n only, fn = n·v/(4L). When source or observer move along the line between them, f′ = f·(v ± vo)/(v ∓ vs): use the upper signs for motion towards each other. Two waves of nearly equal frequency beat at |f₁ − f₂|.
Interference and diffraction: light from two slits a distance d apart reaches a point on the screen with a path difference d·sin θ. Bright fringes appear where d·sin θ = mλ (m = 0, ±1, ±2, …). For a screen at distance L ≫ d, the m-th bright fringe is at y = mλL/d and the fringe spacing is Δy = λL/d. A grating with N lines per millimetre has d = 1/N and sharp maxima at d·sin θ = mλ; since sin θ ≤ 1, the highest order is the largest whole number m ≤ d/λ. A single slit of width a has dark fringes at a·sin θ = mλ, m = ±1, ±2, …