Physics for Engineers: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Hydrostatic force

Pressure at depth
p = ρgh
Force on a vertical wall
F = ρg·hc·A
Centre of pressure
yp = yc + Ic/(ycA)
Rectangle
Ic = bH³/12

Continuity & Bernoulli

Continuity
A1v1 = A2v2
Bernoulli
p1 + ½ρv1² + ρgz1 = p2 + ½ρv2² + ρgz2
Flow rate
Q = A·v
Circle area
A = πd²/4

Ideal gas law

Ideal gas law
pV = nRT
Gas constant
R = 8.314 J/(mol·K)
Combined gas law
p1V1/T1 = p2V2/T2
Moles
n = m/M
Temperature
T[K] = T[°C] + 273.15

Heat engines & refrigerators

Efficiency
η = W/QH = 1 − QC/QH
Carnot efficiency
ηC = 1 − TC/TH (kelvin)
Refrigerator COP
COPR = QC/W
Heat pump COP
COPHP = QH/W = COPR + 1
Energy balance
QH = W + QC

Waves, sound & optics

Wave speed
v = fλ, T = 1/f
String
v = √(T/μ), μ = m/L
Sound level
β = 10·log10(I/I0), I0 = 10⁻¹² W/m²
Point source
I = P/(4πr²)
Standing waves
string or open pipe fn = n·v/(2L); closed pipe fn = n·v/(4L), n odd
Doppler effect
f′ = f·(v ± vo)/(v ∓ vs)
Refractive index
n = c/v, λ = λ0/n
Snell’s law
n1sin θ1 = n2sin θ2
Critical angle
sin θc = n2/n1
Optical fibre
NA = sin θa = √(n1² − n2²)
Lenses and mirrors
1/f = 1/do + 1/di, m = −di/do, mirror f = R/2
Double slit
d·sin θ = mλ, ym = mλL/d
Grating
d = 1/N, d·sin θ = mλ, mmax ≤ d/λ
Single slit
a·sin θ = mλ (dark), w = 2λL/a

Method

  1. Identify the kind of problem: wave speed, sound level, standing wave, Doppler, refraction, lens or mirror, or interference.
  2. Write the relation first: v = fλ, β = 10·log(I/I₀), fₙ = n·v/(2L) or n·v/(4L), f′ = f(v ± vo)/(v ∓ vs), n₁sin θ₁ = n₂sin θ₂, 1/f = 1/d₀ + 1/dᵢ, d·sin θ = mλ.
  3. Convert units: nm, mm and cm to m, and check whether angles are measured from the normal.
  4. Check signs and plausibility: a virtual image has dᵢ < 0, an approaching source sounds higher, a closed pipe has only odd harmonics.

2Practice problems

1.KinematicsMedium
policea = 5.5 m/s²car21 m/s

A car speeding at a constant 21 m/s passes a police car standing still. At that moment the police car starts and accelerates uniformly at 5.5 m/s². How far from its starting point does the police car catch up? Find d.

vcar = 21 m/sapolice = 5.5 m/s²v0,police = 0
d = m
2.KinematicsHard
t (s)v (m/s)6 s

A tram starts from rest and accelerates at 3 m/s² for 6 s, then runs at constant speed for 21 s, and finally brakes at 2.5 m/s² until it stops. Find the total distance s between the two stops.

a1 = 3 m/s²t1 = 6 st2 = 21 sa3 = −2.5 m/s²
s = m
3.Newton’s lawsMedium
boxv₀ = 4.5 m/sμ = ?

A box slides across a level floor with an initial speed of 4.5 m/s and comes to rest after 21 m. Use g = 9.81 m/s². Find the coefficient of kinetic friction μ.

v₀ = 4.5 m/sd = 21 mg = 9.81 m/s²
μ =
4.Newton’s lawsHard
m1​ = 4 kg2.5 kgno friction

A 4 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 2.5 kg mass. The table is frictionless. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 4 kgm2 = 2.5 kgμ = 0g = 9.81 m/s²
T = N
5.Projectile motionMedium
42 my = ?v0​ = 26 m/s25°

A ball is kicked from level ground at 26 m/s and 25° above the horizontal towards a wall 42 m away. Ignore air resistance and use g = 9.81 m/s². At what height y does the ball pass the wall?

v₀ = 26 m/sθ = 25°x = 42 mg = 9.81 m/s²
y = m
6.Projectile motionHard
20 mv0​ = 35 m/s70°x = ?

A ball is thrown from ground level at 35 m/s and 70° above the horizontal. It lands on the flat roof of a building 20 m high, on its way down. Ignore air resistance and use g = 9.81 m/s². Find the horizontal distance x from the launch point to where it lands.

v₀ = 35 m/sθ = 70°hroof = 20 mg = 9.81 m/s²
x = m
7.Work & energyMedium
30°d = 7 mμ = 0.25

A block slides from rest down a slope at 30° to the horizontal. The coefficient of kinetic friction is 0.25. Find its speed v after it has slid 7 m along the slope.

θ = 30°μ = 0.25d = 7 mg = 9.81 m/s²
v = m/s
8.Work & energyHard
h = 4 mL = 5 mμ = 0.3k = 5000 N/m

A 1 kg block is released from rest at height 4 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 5 m long (μ = 0.3) and then runs onto a spring (k = 5000 N/m) on a smooth surface. Find the maximum compression x of the spring.

m = 1 kgh = 4 mL = 5 mμ = 0.3k = 5000 N/mg = 9.81 m/s²
x = cm
9.Momentum & collisionsMedium
2.5 kg11 m/s3.5 kg

A 2.5 kg glider moving at 11 m/s makes a perfectly elastic head-on collision with a 3.5 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).

m1 = 2.5 kgm2 = 3.5 kgv1 = 11 m/sv2 = 0
v′1 = m/s
10.Momentum & collisionsHard
1600 kg15 m/s1100 kg16 m/sθ = ?

At a crossing a 1600 kg car travelling east at 15 m/s collides with a 1100 kg car travelling north at 16 m/s. The cars lock together. Find the direction θ of the wreck just after the collision, measured north of east.

m1 = 1600 kgv1 = 15 m/s (E)m2 = 1100 kgv2 = 16 m/s (N)
θ = °
11.Hydrostatic forceMedium
gated = 2.5 mH = 1.5 m

A vertical rectangular gate 1 m wide sits in the wall of a tank of water, with its top edge 2.5 m below the surface. Find the resultant hydrostatic force F on the gate.

d = 2.5 mH = 1.5 mb = 1 mρ = 1000 kg/m³g = 9.81 m/s²
F = kN
12.Hydrostatic forceHard
gated = 4 mH = 1.5 m

A vertical rectangular gate 2 m wide sits in the wall of a tank of oil, with its top edge 4 m below the surface. Find the resultant hydrostatic force F on the gate.

d = 4 mH = 1.5 mb = 2 mρ = 880 kg/m³g = 9.81 m/s²
F = kN
13.Continuity & BernoulliMedium
d1​ = 250 mmd2​ = 125 mm12p1​ − p2​ = 42 kPaQ = ?

Water flows through a horizontal venturi meter with an inlet diameter of 250 mm and a throat diameter of 125 mm. The pressure at the inlet is 42 kPa higher than at the throat. Ignoring losses, find the flow rate Q.

d1 = 250 mmd2 = 125 mmp1 − p2 = 42 kPaρ = 1000 kg/m³
Q = L/s
14.Continuity & BernoulliHard
C212 m2.5 md = 32 mmpC​ = ?

A hose with an inner diameter of 32 mm siphons water from an open tank. The highest point C of the hose is 2 m above the water surface, and the outlet (open to the air) is 2.5 m below the water surface. Ignore losses and take g = 9.81 m/s². Find the absolute pressure pC at point C. The atmospheric pressure is 101.3 kPa.

d = 32 mmzC = +2 mz2 = −2.5 mg = 9.81 m/s²patm = 101.3 kPa
pC = kPa
15.Ideal gas lawMedium
170 g of HeV = 20 LT = 15 °CP = ?

A tank of 20 L contains 170 g of He at 15 °C. Treat it as an ideal gas and find the pressure P.

m = 170 gM = 4.003 g/molV = 20 LT = 15 °CR = 8.314 J/(mol·K)
P = kPa
16.Ideal gas lawHard
State 1State 2

A fixed amount of He goes from 300 kPa, 2 L, 25 °C to 550 kPa and 150 °C. Find the new volume V2.

P1 = 300 kPaV1 = 2 LT1 = 25 °CP2 = 550 kPaT2 = 150 °C
V2 = L
17.Heat engines & refrigeratorsMedium
TH​ = 300 °CTL​ = 20 °CEQH​QL​η = 20%

A heat engine receives heat from a source at 300 °C and rejects heat to the surroundings at 20 °C. Its actual thermal efficiency is 20%. Find its second-law efficiency ηII, the ratio of the actual efficiency to the Carnot efficiency.

TH = 300 °CTL = 20 °Cη = 20%
ηII = %
18.Heat engines & refrigeratorsHard
TH​ = 22 °CTL​ = -10 °CHPQ̇H​ = 14 kWQ̇L​Ẇ = ?

A heat pump keeps a house at 22 °C while it is -10 °C outside, delivering 14 kW of heat to the house. Find the minimum power input Ẇmin.

TH = 22 °CTL = -10 °CQ̇H = 14 kW
Ẇmin = kW
19.Waves, sound & opticsMedium
θc = ?90°diamond, n1​ = 2.42ethanol, n2​ = 1.36

Light travels in diamond (n = 2.42) towards a flat boundary with ethanol (n = 1.36). Find the critical angle θc beyond which it is totally reflected.

n1 = 2.42n2 = 1.36
θc = °
20.Waves, sound & opticsHard
λ = 500 nmθ3​ = ?

Light of wavelength 500 nm falls at right angles on a grating with 500 lines per millimetre. Find the angle θ3 of the order-3 maximum.

N = 500 mm⁻¹λ = 500 nmm = 3
θ3 = °

3Solutions

1.Kinematics

Answer: d = 160.4 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equal distances

v·t = ½·a·t² → t = 2v/a = 2·21/5.5 = 7.636 s

Distance

d = v·t = 21·7.636 = 160.4 m

Answer

d = 160.4 m

At that moment the police car moves at 2v = 42 m/s.

2.Kinematics

Answer: s = 496.8 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Top speed

v = a1·t1 = 3·6 = 18 m/s

Distance of each phase

s1 = ½·3·6² = 54 m
s2 = 18·21 = 378 m
s3 = 18²/(2·2.5) = 64.8 m

Total distance

s = 54 + 378 + 64.8 = 496.8 m

Answer

s = 496.8 m
3.Newton’s laws

Answer: μ = 0.04915

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Deceleration

a = v₀²/(2d) = 4.5²/(2·21) = 0.4821 m/s²

Friction coefficient

μ·m·g = m·a → μ = a/g = 0.4821/9.81 = 0.04915

Answer

μ = 0.04915
4.Newton’s laws

Answer: T = 15.09 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (24.53 − 0)/6.5 = 3.773 m/s²

Tension from the block on the table

T − μ·m1·g = m1·a
T = 4·3.773 + 0 = 15.09 N

Answer

T = 15.09 N
5.Projectile motion

Answer: y = 4.002 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Time to the wall

vx = 26·cos 25° = 23.56 m/s
t = x/vx = 42/23.56 = 1.782 s

Height at that time

y = 10.99·1.782 − ½·9.81·1.782² = 4.002 m

Answer

y = 4.002 m

The ball is already on its way down at the wall.

6.Projectile motion

Answer: x = 72.17 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

vx = 11.97 m/s, vy = 32.89 m/s

Time to land on the roof

Larger root: the ball is descending.

20 = 32.89·t − 4.905·t²
t = (32.89 + √(32.89² − 2·9.81·20))/9.81 = 6.029 s

Horizontal distance

x = vx·t = 11.97·6.029 = 72.17 m

Answer

x = 72.17 m
7.Work & energy

Answer: v = 6.24 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy balance along the slope

The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.

½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·7·(0.5 − 0.25·0.866)) = 6.24 m/s

Answer

v = 6.24 m/s
8.Work & energy

Answer: x = 9.905 cm

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 9.81·(4 − 0.3·5) = 24.53 J

Maximum compression

½kx² = 24.53 → x = √(2·24.53/5000) = 0.09905 m = 9.905 cm

Answer

x = 9.905 cm
9.Momentum & collisions

Answer: v′1 = −1.833 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (2.5 − 3.5)/(2.5 + 3.5)·11 = −1.833 m/s
v′2 = 2·2.5/(2.5 + 3.5)·11 = 9.167 m/s

Answer

v′1 = −1.833 m/s

The minus sign means the first glider bounces back.

10.Momentum & collisions

Answer: θ = 36.25 °

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum components

px = 1600·15 = 24000 kg·m/s
py = 1100·16 = 17600 kg·m/s

Direction

tan θ = py/px = 0.7333 → θ = 36.25°

Answer

θ = 36.25°
11.Hydrostatic force

Answer: F = 47.82 kN

Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.

Centroid depth and area

yc = d + H/2 = 2.5 + 1.5/2 = 3.25 m
A = H·b = 1.5·1 = 1.5 m²
gated = 2.5 mH = 1.5 mF

Resultant force

F = ρ·g·yc·A = 1000·9.81·3.25·1.5 = 47.82 kN

Answer

F = 47.82 kN
12.Hydrostatic force

Answer: F = 123 kN

Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.

Centroid depth and area

yc = d + H/2 = 4 + 1.5/2 = 4.75 m
A = H·b = 1.5·2 = 3 m²
gated = 4 mH = 1.5 mF

Resultant force

F = ρ·g·yc·A = 880·9.81·4.75·3 = 123 kN

Answer

F = 123 kN
13.Continuity & Bernoulli

Answer: Q = 116.2 L/s

Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.

Continuity

v1 = v2·(125/250)² = 0.25·v2

Bernoulli between inlet and throat

The pipe is horizontal, so only pressure and velocity change.

p1 − p2 = ½ρv2²(1 − β⁴)
v2 = √(2·42000/(1000·(1 − 0.0625))) = 9.466 m/s
v1 = 2.366 m/s

Flow rate

Q = A2·v2 = 0.01227·9.466 = 0.1162 m³/s = 116.2 L/s

Answer

Q = 116.2 L/s
14.Continuity & Bernoulli

Answer: pC = 57.15 kPa

Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.

Velocity in the hose

Surface and outlet are both open to the air, so the pressure terms cancel.

v = √(2g·2.5) = √(2·9.81·2.5) = 7.004 m/s

Bernoulli from the surface to C

patm = pC + ½ρv² + ρgzC
pC = 101.3 − 1000·(7.004²/2 + 9.81·2)/1000 = 101.3 − 44.15 = 57.15 kPa

Answer

pC = 57.15 kPa

If this pressure falls to the vapour pressure of the water, the siphon stops working.

15.Ideal gas law

Answer: P = 5087 kPa

Ideal gas law: PV = nRT, with n = m/M.

Moles

n = m/M = 170/4.003 = 42.47 mol
T = 15 + 273.15 = 288.1 K

Pressure

P = nRT/V = 42.47·8.314·288.1/0.02 = 5087 kPa

Answer

P = 5087 kPa
16.Ideal gas law

Answer: V2 = 1.548 L

Combined gas law: for a fixed amount of ideal gas, P1V1/T1 = P2V2/T2.

Absolute temperatures

T1 = 298.1 K, T2 = 423.1 K

Combined gas law

V2 = V1·(P1/P2)·(T2/T1) = 2·(300/550)·(423.1/298.1) = 1.548 L

Answer

V2 = 1.548 L
17.Heat engines & refrigerators

Answer: ηII = 40.94 %

Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.

Absolute temperatures

TH = 300 + 273.15 = 573.1 K
TL = 20 + 273.15 = 293.1 K

Carnot efficiency

ηCarnot = 1 − 293.1/573.1 = 48.85 %

Second-law efficiency

ηII = η/ηCarnot = 20/48.85 = 40.94 %

Answer

ηII = 40.94 %
18.Heat engines & refrigerators

Answer: Ẇmin = 1.518 kW

Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.

Absolute temperatures

TH = 22 + 273.15 = 295.1 K
TL = -10 + 273.15 = 263.1 K

Best possible COP

COPHP,max = TH/(TH − TL) = 295.1/(295.1 − 263.1) = 9.223

Minimum power

The least work is needed by a reversible machine, which has the highest COP.

Ẇmin = Q̇H/COP = 14/9.223 = 1.518 kW

Answer

Ẇmin = 1.518 kW
19.Waves, sound & optics

Answer: θc = 34.19 °

Geometric optics: at a boundary, n₁·sin θ₁ = n₂·sin θ₂ (Snell's law), with angles measured from the normal and n = c/v. Going into a slower medium the ray bends towards the normal. From a denser medium (n₁ > n₂) beyond the critical angle θc = arcsin(n₂/n₁) all light is reflected: total internal reflection. Thin lenses and spherical mirrors obey 1/f = 1/do + 1/di with the magnification m = −di/do. Sign convention: f > 0 for a converging lens and a concave mirror (f = R/2), f < 0 for a diverging lens and a convex mirror; di > 0 for a real image, di < 0 for a virtual one, and m < 0 for an inverted image.

Refraction at 90°

sin θc = n₂/n₁ = 1.36/2.42 = 0.562

Critical angle

θc = arcsin(0.562) = 34.19°

Answer

θc = 34.19°
20.Waves, sound & optics

Answer: θ3 = 48.59 °

Interference and diffraction: light from two slits a distance d apart reaches a point on the screen with a path difference d·sin θ. Bright fringes appear where d·sin θ = mλ (m = 0, ±1, ±2, …). For a screen at distance L ≫ d, the m-th bright fringe is at y = mλL/d and the fringe spacing is Δy = λL/d. A grating with N lines per millimetre has d = 1/N and sharp maxima at d·sin θ = mλ; since sin θ ≤ 1, the highest order is the largest whole number m ≤ d/λ. A single slit of width a has dark fringes at a·sin θ = mλ, m = ±1, ±2, …

Line spacing

d = 1/500 mm = 2 × 10⁻⁶ m

Grating equation

sin θ = mλ/d = 3·500 × 10⁻⁹/(2 × 10⁻⁶) = 0.75
θ = 48.59°

Answer

θ3 = 48.59°

ExamProblems · examproblems.com/courses/physics-for-engineers