Convert units: nm, mm and cm to m, and check whether angles are measured from the normal.
Check signs and plausibility: a virtual image has dᵢ < 0, an approaching source sounds higher, a closed pipe has only odd harmonics.
2Practice problems
1.KinematicsMedium
A driver moving at 80 km/h sees an obstacle. Her reaction time is 0.5 s, after which the car brakes with a constant deceleration of 5.5 m/s². Find the total stopping distance d from the moment she sees the obstacle.
v₀ = 80 km/htr = 0.5 sa = −5.5 m/s²
d = m
2.KinematicsHard
A ball is thrown straight up at 19 m/s from the edge of a roof 20 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.
v₀ = 19 m/sh₀ = 20 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
A 13 kg block slides down a slope at 20° to the horizontal. The coefficient of kinetic friction is 0.1. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.
m = 13 kgθ = 20°μ = 0.1g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
A block is given a push so that it starts sliding up a ramp at 35° with a speed of 4.5 m/s. The coefficient of kinetic friction is 0.25. Use g = 9.81 m/s². How far d along the ramp does it slide before it stops?
v₀ = 4.5 m/sθ = 35°μ = 0.25g = 9.81 m/s²
d = m
5.Projectile motionMedium
A ball is launched from level ground at 60° above the horizontal and lands 25 m away. Ignore air resistance and use g = 9.81 m/s². Find the launch speed v0.
θ = 60°R = 25 mg = 9.81 m/s²
v0 = m/s
6.Projectile motionHard
A ball is launched at 10 m/s and 65° above the horizontal from the top of a 20 m cliff. Ignore air resistance and use g = 9.81 m/s². Find the greatest height H above the ground at the foot of the cliff.
v₀ = 10 m/sθ = 65°h = 20 mg = 9.81 m/s²
H = m
7.Work & energyMedium
A block slides from rest down a slope at 30° to the horizontal. The coefficient of kinetic friction is 0.25. Find its speed v after it has slid 19 m along the slope.
θ = 30°μ = 0.25d = 19 mg = 9.81 m/s²
v = m/s
8.Work & energyHard
A 20 kg block starts from rest at the bottom of a 15° slope and is pulled up the slope by a constant force of 140 N parallel to the slope. The coefficient of kinetic friction is 0.25. Find the speed v of the block after it has moved 9 m up the slope.
An 11 kg projectile moving horizontally at 28 m/s explodes into two fragments that move along the same line. The 10 kg fragment continues forwards at 68 m/s. Find the velocity v′2 of the 1 kg fragment (positive in the original direction).
M = 11 kgu = 28 m/sm1 = 10 kgv′1 = 68 m/sm2 = 1 kg
v′2 = m/s
10.Momentum & collisionsHard
A 1000 kg car runs into a parked 1300 kg car. The wrecks lock together and skid 13 m before stopping. The coefficient of kinetic friction between tyres and road is 0.7. Use g = 9.81 m/s². Find the speed v1 of the first car just before the collision.
A vertical rectangular gate 2 m wide sits in the wall of a tank of water, with its top edge 1.5 m below the surface. Find the resultant hydrostatic force F on the gate.
A vertical rectangular gate 1.5 m wide sits in the wall of a tank of oil, with its top edge 3 m below the surface. Find the depth ycp of the centre of pressure below the surface.
d = 3 mH = 2 mb = 1.5 mρ = 880 kg/m³g = 9.81 m/s²
ycp = m
13.Continuity & BernoulliMedium
Water flows through a horizontal pipe that narrows from 200 mm to 75 mm. In the wide section the pressure is 390 kPa and the velocity is 0.75 m/s. Ignoring losses, find the pressure p2 in the narrow section.
A closed water tank has compressed air above the water at a gauge pressure of 110 kPa. Water leaves through an opening with a diameter of 25 mm, 3 m below the water surface, into the open air. Ignoring losses, find the jet velocity v. Use g = 9.81 m/s².
A heat engine works between a hot reservoir at 775 °C and a cold reservoir at 40 °C. Find the highest possible thermal efficiency ηmax.
TH = 775 °CTL = 40 °C
ηmax = %
18.Heat engines & refrigeratorsHard
A heat engine takes in 3200 kJ of heat from a reservoir at 350 °C, produces 864 kJ of work and rejects the rest to a reservoir at 15 °C, per cycle. Find the total entropy generated Sgen per cycle.
TH = 350 °CTL = 15 °CQH = 3200 kJW = 864 kJ
Sgen = kJ/K
19.Waves, sound & opticsMedium
A pipe closed at one end is 0.65 m long. The speed of sound is 343 m/s. Find the frequency f7 of its harmonic number 7.
v = 343 m/sn = 7L = 0.65 m
f7 = Hz
20.Waves, sound & opticsHard
Two thin lenses share an axis, 25 cm apart: lens 1 with f₁ = 15 cm and lens 2 with f₂ = 20 cm. An object stands 25 cm in front of lens 1. Find the position di2 of the final image measured from lens 2 (positive beyond lens 2, real-is-positive convention).
f1 = 15 cmf2 = 20 cms = 25 cmdo = 25 cm
di2 = cm
3Solutions
1.Kinematics
Answer: d = 56 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v₀ = 80/3.6 = 22.22 m/s
Reaction distance
d1 = v₀·tr = 22.22·0.5 = 11.11 m
Braking distance
d2 = v₀²/(2a) = 22.22²/(2·5.5) = 44.89 m
Total
d = 11.11 + 44.89 = 56 m
Answer
d = 56 m
2.Kinematics
Answer: t = 4.735 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equation of motion
Up is positive and the ground is h₀ below the starting point.
−20 = 19·t − ½·9.81·t²
4.905·t² − 19·t − 20 = 0
Solve the quadratic
Only the positive root is physical.
t = (19 + √(19² + 2·9.81·20))/9.81 = 4.735 s
Answer
t = 4.735 s
3.Newton’s laws
Answer: a = 2.433 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Deceleration
Both forces point down the slope; the mass cancels.
a = 9.81·(sin 35° + 0.25·cos 35°) = 7.636 m/s²
Distance
d = v₀²/(2a) = 4.5²/(2·7.636) = 1.326 m
Answer
d = 1.326 m
5.Projectile motion
Answer: v0 = 16.83 m/s
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Solve the range formula for v₀
v₀ = √(g·R/sin 2θ) = √(9.81·25/sin 120°) = 16.83 m/s
Answer
v0 = 16.83 m/s
6.Projectile motion
Answer: H = 24.19 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Vertical launch speed
vy = 10·sin 65° = 9.063 m/s
Rise above the cliff
Δh = vy²/(2g) = 9.063²/(2·9.81) = 4.187 m
Height above the ground
H = 20 + 4.187 = 24.19 m
Answer
H = 24.19 m
7.Work & energy
Answer: v = 10.28 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy balance along the slope
The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.
½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·19·(0.5 − 0.25·0.866)) = 10.28 m/s
Answer
v = 10.28 m/s
8.Work & energy
Answer: v = 6.137 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Forces along the slope
m·g = 20·9.81 = 196.2 N
mg·sin θ = 50.78 N
μ·mg·cos θ = 47.38 N
Work–energy
½mv² = (140 − 98.16)·9 = 376.6 J
v = √(2·376.6/20) = 6.137 m/s
Answer
v = 6.137 m/s
9.Momentum & collisions
Answer: v′2 = −372 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Momentum before
p = M·u = 11·28 = 308 kg·m/s
Momentum after
308 = 10·68 + 1·v′2
v′2 = (308 − 680)/1 = −372 m/s
Answer
v′2 = −372 m/s
The minus sign means the second fragment flies backwards.
10.Momentum & collisions
Answer: v1 = 30.73 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 1.5 + 2/2 = 2.5 m
A = H·b = 2·2 = 4 m²
Resultant force
F = ρ·g·yc·A = 1000·9.81·2.5·4 = 98.1 kN
Answer
F = 98.1 kN
12.Hydrostatic force
Answer: ycp = 4.083 m
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 3 + 2/2 = 4 m
A = H·b = 2·1.5 = 3 m²
Resultant force
F = ρ·g·yc·A = 880·9.81·4·3 = 103.6 kN
Centre of pressure
Pressure grows with depth, so the resultant acts below the centroid.
Ic = b·H³/12 = 1.5·2³/12 = 1 m⁴
ycp = yc + Ic/(yc·A) = 4 + 1/(4·3) = 4.083 m
Answer
ycp = 4.083 m
13.Continuity & Bernoulli
Answer: p2 = 376.1 kPa
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Bernoulli from the surface to the jet
v = √(2·(110000/1000 + 9.81·3)) = 16.7 m/s
Answer
v = 16.7 m/s
15.Ideal gas law
Answer: V = 52.7 L
Ideal gas law: PV = nRT, with n = m/M.
Moles
n = 210/16.04 = 13.09 mol
T = 90 + 273.15 = 363.1 K
Volume
V = nRT/P = 13.09·8.314·363.1/750 = 52.7 L
Answer
V = 52.7 L
16.Ideal gas law
Answer: ρ = 4.063 kg/m³
Ideal gas density: ρ = PM/(RT).
Rearrange the gas law
PV = (m/M)RT → ρ = m/V = PM/(RT)
T = 100 + 273.15 = 373.1 K
Density
ρ = 450·28.01/(8.314·373.1) = 4.063 kg/m³
Answer
ρ = 4.063 kg/m³
17.Heat engines & refrigerators
Answer: ηmax = 70.12 %
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
Absolute temperatures
TH = 775 + 273.15 = 1048 K
TL = 40 + 273.15 = 313.1 K
Carnot efficiency
ηmax = 1 − TL/TH = 1 − 313.1/1048 = 70.12 %
Answer
ηmax = 70.12 %
18.Heat engines & refrigerators
Answer: Sgen = 2.972 kJ/K
Entropy generation: over a full cycle the working fluid has no net entropy change. The hot reservoir loses QH/TH and the cold reservoir gains QL/TL. Their sum is the entropy generated, which is zero for a reversible cycle and positive for every real one.
Heat rejected
QL = QH − W = 3200 − 864 = 2336 kJ
Absolute temperatures
TH = 350 + 273.15 = 623.1 K
TL = 15 + 273.15 = 288.1 K
Entropy changes of the reservoirs
ΔSH = −3200/623.1 = −5.135 kJ/K
ΔSL = 2336/288.1 = 8.107 kJ/K
Sgen = 8.107 − 5.135 = 2.972 kJ/K
Answer
Sgen = 2.972 kJ/K
Sgen > 0, so the engine is possible but irreversible.
19.Waves, sound & optics
Answer: f7 = 923.5 Hz
Standing waves and the Doppler effect: a string fixed at both ends, or a pipe open at both ends, fits whole half-wavelengths: L = nλ/2, fn = n·v/(2L), n = 1, 2, 3, … A pipe closed at one end has a node at the closed end and an antinode at the open end: L = nλ/4 with odd n only, fn = n·v/(4L). When source or observer move along the line between them, f′ = f·(v ± vo)/(v ∓ vs): use the upper signs for motion towards each other. Two waves of nearly equal frequency beat at |f₁ − f₂|.
Wavelength of this mode
λ = 4L/n = 4·0.65/7 = 0.3714 m
Frequency
f = v/λ = 343/0.3714 = 923.5 Hz
Answer
f7 = 923.5 Hz
20.Waves, sound & optics
Answer: di2 = 7.692 cm
Geometric optics: at a boundary, n₁·sin θ₁ = n₂·sin θ₂ (Snell's law), with angles measured from the normal and n = c/v. Going into a slower medium the ray bends towards the normal. From a denser medium (n₁ > n₂) beyond the critical angle θc = arcsin(n₂/n₁) all light is reflected: total internal reflection. Thin lenses and spherical mirrors obey 1/f = 1/do + 1/di with the magnification m = −di/do. Sign convention: f > 0 for a converging lens and a concave mirror (f = R/2), f < 0 for a diverging lens and a convex mirror; di > 0 for a real image, di < 0 for a virtual one, and m < 0 for an inverted image.