Convert units: nm, mm and cm to m, and check whether angles are measured from the normal.
Check signs and plausibility: a virtual image has dᵢ < 0, an approaching source sounds higher, a closed pipe has only odd harmonics.
2Practice problems
1.KinematicsMedium
A car driving at 60 km/h brakes with a constant deceleration of 4 m/s² until it stops. How long does braking take? Find t.
v₀ = 60 km/ha = −4 m/s²v = 0
t = s
2.KinematicsHard
A stone is dropped from rest into a well. The splash is heard 1.9 s after the stone is released. The speed of sound is 343 m/s; ignore air resistance and use g = 9.81 m/s². Find the depth d of the well.
ttotal = 1.9 svsound = 343 m/sg = 9.81 m/s²
d = m
3.Newton’s lawsMedium
A 4 kg block slides down a frictionless slope at 40° to the horizontal. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.
m = 4 kgθ = 40°μ = 0g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 110 N pulls the front 10 kg block; the 6 kg block is towed behind. The coefficient of kinetic friction is 0.2 for both blocks. Use g = 9.81 m/s². Find the tension T in the connecting string.
m1 = 6 kgm2 = 10 kgF = 110 Nμ = 0.2g = 9.81 m/s²
T = N
5.Projectile motionMedium
A ball is launched at 60° above horizontal from level ground. Ignore air resistance. Find the maximum height H the ball reaches.
v0 = 10 m/sθ = 60°g = 9.81 m/s²
H = m
6.Projectile motionHard
A ball is launched at 26 m/s and 25° above the horizontal from the top of a 30 m cliff. Ignore air resistance and use g = 9.81 m/s². Find the greatest height H above the ground at the foot of the cliff.
v₀ = 26 m/sθ = 25°h = 30 mg = 9.81 m/s²
H = m
7.Work & energyMedium
A 1500 kg car drives up a 5° slope at a constant 54 km/h. Air resistance and rolling resistance together amount to 200 N. Find the power P the wheels must deliver, in kW.
A 0.5 kg block is released from rest at height 5 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 1.5 m long (μ = 0.2) and then runs onto a spring (k = 1500 N/m) on a smooth surface. Find the maximum compression x of the spring.
m = 0.5 kgh = 5 mL = 1.5 mμ = 0.2k = 1500 N/mg = 9.81 m/s²
x = cm
9.Momentum & collisionsMedium
A 1300 kg car moving at 11 m/s runs into a stationary 1200 kg car and the two lock together. How much kinetic energy ΔK is lost in the collision?
m1 = 1300 kgv1 = 11 m/sm2 = 1200 kgv2 = 0
ΔK = J
10.Momentum & collisionsHard
A 0.25 kg ball hits a wall at 12 m/s and bounces straight back at 4 m/s. The contact lasts 10 ms. Find the magnitude of the impulse J the wall gives the ball.
m = 0.25 kgvin = 12 m/svout = 4 m/sΔt = 10 ms
J = N·s
11.Hydrostatic forceMedium
A vertical rectangular gate 1.5 m wide sits in the wall of a tank of water, with its top edge 2 m below the surface. Find the resultant hydrostatic force F on the gate.
A vertical rectangular gate 2 m wide sits in the wall of a tank of oil, with its top edge 0.5 m below the surface. Find the resultant hydrostatic force F on the gate.
Water flows through a horizontal pipe that narrows from 100 mm to 75 mm. In the wide section the pressure is 260 kPa and the velocity is 1 m/s. Ignoring losses, find the pressure p2 in the narrow section.
Water flows up through a pipe that narrows from 75 mm to 50 mm while rising 7 m. At section 1 the pressure is 200 kPa and the velocity is 0.75 m/s. Ignoring losses, find the pressure p2 at section 2.
A heat engine works between a hot reservoir at 525 °C and a cold reservoir at 25 °C. Find the highest possible thermal efficiency ηmax.
TH = 525 °CTL = 25 °C
ηmax = %
18.Heat engines & refrigeratorsHard
A heat engine takes in 2400 kJ of heat from a reservoir at 800 °C, produces 864 kJ of work and rejects the rest to a reservoir at 30 °C, per cycle. Find the total entropy generated Sgen per cycle.
TH = 800 °CTL = 30 °CQH = 2400 kJW = 864 kJ
Sgen = kJ/K
19.Waves, sound & opticsMedium
A string fixed at both ends is 1.2 m long; waves travel on it at 240 m/s. Find the frequency f3 of its harmonic number 3.
v = 240 m/sn = 3L = 1.2 m
f3 = Hz
20.Waves, sound & opticsHard
A parking sensor at rest sends ultrasound of 40 kHz towards a car that approaches at 25 m/s. Find the frequency f″ of the echo received back at the sensor (speed of sound 343 m/s).
f = 40 kHzu = 25 m/sv = 343 m/s
f″ = Hz
3Solutions
1.Kinematics
Answer: t = 4.167 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v₀ = 60/3.6 = 16.67 m/s
Braking time
0 = v₀ − a·t → t = v₀/a = 16.67/4 = 4.167 s
Answer
t = 4.167 s
2.Kinematics
Answer: d = 16.81 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Two parts of the time
½·9.81·t₁² = 343·(1.9 − t₁)
4.905·t₁² + 343·t₁ − 651.7 = 0
Fall time
Only the positive root is physical.
t₁ = (−343 + √(343² + 4·4.905·651.7))/(2·4.905) = 1.851 s
Depth
d = ½·9.81·1.851² = 16.81 m
Answer
d = 16.81 m
3.Newton’s laws
Answer: a = 6.306 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
With the same μ on both blocks, friction drops out: T = F·m₁/(m₁ + m₂).
5.Projectile motion
Answer: H = 3.823 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 10·cos 60° = 5 m/s
vy = v0·sin θ = 10·sin 60° = 8.66 m/s
Highest point
At the top the vertical velocity is zero: vy² = 2gH.
H = vy²/(2g) = 8.66²/(2·9.81) = 3.823 m
Answer
H = 3.823 m
6.Projectile motion
Answer: H = 36.15 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Vertical launch speed
vy = 26·sin 25° = 10.99 m/s
Rise above the cliff
Δh = vy²/(2g) = 10.99²/(2·9.81) = 6.154 m
Height above the ground
H = 30 + 6.154 = 36.15 m
Answer
H = 36.15 m
7.Work & energy
Answer: P = 22.24 kW
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). Power is force times speed: P = F·v.
Driving force
m·g = 1500·9.81 = 14715 N
mg·sin θ = 14715·sin 5° = 1282 N
F = 1282 + 200 = 1482 N
Power
v = 54/3.6 = 15 m/s
P = F·v = 1482·15 = 22237 W = 22.24 kW
Answer
P = 22.24 kW
8.Work & energy
Answer: x = 17.53 cm
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy left after the rough strip
The ramp is smooth, so only the strip removes energy.
mgh − μmgL = 4.905·(5 − 0.2·1.5) = 23.05 J
Maximum compression
½kx² = 23.05 → x = √(2·23.05/1500) = 0.1753 m = 17.53 cm
Answer
x = 17.53 cm
9.Momentum & collisions
Answer: ΔK = 37752 J
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Common velocity
v′ = m1·v1/(m1 + m2) = 1300·11/2500 = 5.72 m/s
Kinetic energy before and after
Kbefore = ½·1300·11² = 78650 J
Kafter = ½·2500·5.72² = 40898 J
Energy lost
ΔK = 78650 − 40898 = 37752 J
Answer
ΔK = 37752 J
The lost energy goes into deformation, heat and sound.
10.Momentum & collisions
Answer: J = 4 N·s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Change in momentum
J = m·Δv = 0.25·(4 + 12) = 4 N·s
Answer
J = 4 N·s
11.Hydrostatic force
Answer: F = 88.29 kN
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 2 + 2/2 = 3 m
A = H·b = 2·1.5 = 3 m²
Resultant force
F = ρ·g·yc·A = 1000·9.81·3·3 = 88.29 kN
Answer
F = 88.29 kN
12.Hydrostatic force
Answer: F = 32.37 kN
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 0.5 + 1.5/2 = 1.25 m
A = H·b = 1.5·2 = 3 m²
Resultant force
F = ρ·g·yc·A = 880·9.81·1.25·3 = 32.37 kN
Answer
F = 32.37 kN
13.Continuity & Bernoulli
Answer: p2 = 258.9 kPa
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Combined gas law: for a fixed amount of ideal gas, P1V1/T1 = P2V2/T2.
Absolute temperatures
T1 = 283.1 K, T2 = 493.1 K
Combined gas law
V2 = V1·(P1/P2)·(T2/T1) = 20·(200/600)·(493.1/283.1) = 11.61 L
Answer
V2 = 11.61 L
17.Heat engines & refrigerators
Answer: ηmax = 62.64 %
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
Absolute temperatures
TH = 525 + 273.15 = 798.1 K
TL = 25 + 273.15 = 298.1 K
Carnot efficiency
ηmax = 1 − TL/TH = 1 − 298.1/798.1 = 62.64 %
Answer
ηmax = 62.64 %
18.Heat engines & refrigerators
Answer: Sgen = 2.83 kJ/K
Entropy generation: over a full cycle the working fluid has no net entropy change. The hot reservoir loses QH/TH and the cold reservoir gains QL/TL. Their sum is the entropy generated, which is zero for a reversible cycle and positive for every real one.
Heat rejected
QL = QH − W = 2400 − 864 = 1536 kJ
Absolute temperatures
TH = 800 + 273.15 = 1073 K
TL = 30 + 273.15 = 303.1 K
Entropy changes of the reservoirs
ΔSH = −2400/1073 = −2.236 kJ/K
ΔSL = 1536/303.1 = 5.067 kJ/K
Sgen = 5.067 − 2.236 = 2.83 kJ/K
Answer
Sgen = 2.83 kJ/K
Sgen > 0, so the engine is possible but irreversible.
19.Waves, sound & optics
Answer: f3 = 300 Hz
Standing waves and the Doppler effect: a string fixed at both ends, or a pipe open at both ends, fits whole half-wavelengths: L = nλ/2, fn = n·v/(2L), n = 1, 2, 3, … A pipe closed at one end has a node at the closed end and an antinode at the open end: L = nλ/4 with odd n only, fn = n·v/(4L). When source or observer move along the line between them, f′ = f·(v ± vo)/(v ∓ vs): use the upper signs for motion towards each other. Two waves of nearly equal frequency beat at |f₁ − f₂|.
Wavelength of this mode
λ = 2L/n = 2·1.2/3 = 0.8 m
Frequency
f = v/λ = 240/0.8 = 300 Hz
Answer
f3 = 300 Hz
20.Waves, sound & optics
Answer: f″ = 46289 Hz
Standing waves and the Doppler effect: a string fixed at both ends, or a pipe open at both ends, fits whole half-wavelengths: L = nλ/2, fn = n·v/(2L), n = 1, 2, 3, … A pipe closed at one end has a node at the closed end and an antinode at the open end: L = nλ/4 with odd n only, fn = n·v/(4L). When source or observer move along the line between them, f′ = f·(v ± vo)/(v ∓ vs): use the upper signs for motion towards each other. Two waves of nearly equal frequency beat at |f₁ − f₂|.