Convert units: nm, mm and cm to m, and check whether angles are measured from the normal.
Check signs and plausibility: a virtual image has dᵢ < 0, an approaching source sounds higher, a closed pipe has only odd harmonics.
2Practice problems
1.KinematicsMedium
A car driving at 36 km/h brakes with a constant deceleration of 3 m/s² until it stops. Find the braking distance s.
v₀ = 36 km/ha = −3 m/s²v = 0
s = m
2.KinematicsHard
A model rocket is launched straight up from rest. Its engine gives it a constant upward acceleration of 34 m/s² for 3 s, after which the engine stops and the rocket moves freely. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax the rocket reaches.
a = 34 m/s²t1 = 3 sg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
Masses of 4 kg and 3.5 kg hang on either side of a light, frictionless pulley, connected by a light string. The system is released from rest. Use g = 9.81 m/s². Find the acceleration a of the masses.
m1 = 4 kgm2 = 3.5 kgg = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
A block is given a push so that it starts sliding up a ramp at 25° with a speed of 9 m/s. The coefficient of kinetic friction is 0.3. Use g = 9.81 m/s². How far d along the ramp does it slide before it stops?
v₀ = 9 m/sθ = 25°μ = 0.3g = 9.81 m/s²
d = m
5.Projectile motionMedium
A ball is launched at 35° above horizontal from level ground. Ignore air resistance. Find the time of flight t until the ball hits the ground.
v0 = 26 m/sθ = 35°g = 9.81 m/s²
t = s
6.Projectile motionHard
A ball is launched at 60° above horizontal from the top of a 15 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.
v0 = 22 m/sθ = 60°h = 15 mg = 9.81 m/s²
t = s
7.Work & energyMedium
A car travelling at 40 km/h on a level road brakes hard and skids to a stop with its wheels locked. The coefficient of kinetic friction between the tyres and the road is 0.6. Find the stopping distance d.
v = 40 km/hμ = 0.6g = 9.81 m/s²
d = m
8.Work & energyHard
A 5 kg cart is released from rest at a height of 4.2 m on a smooth track that leads into a vertical circular loop of radius 1.5 m. Find the speed v of the cart at the top of the loop.
m = 5 kgh = 4.2 mR = 1.5 mg = 9.81 m/s²
v = m/s
9.Momentum & collisionsMedium
A 3.5 kg glider moving at 3 m/s makes a perfectly elastic head-on collision with a 5 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).
m1 = 3.5 kgm2 = 5 kgv1 = 3 m/sv2 = 0
v′1 = m/s
10.Momentum & collisionsHard
A 10 g bullet is fired horizontally into a 4.5 kg block hanging from light strings 1.5 m long, and stays in it. The strings swing out to a largest angle of 35° from the vertical. Use g = 9.81 m/s². Find the speed v of the bullet before impact.
m = 10 gM = 4.5 kgL = 1.5 mθ = 35°g = 9.81 m/s²
v = m/s
11.Hydrostatic forceMedium
A vertical rectangular gate 3 m wide sits in the wall of a tank of water, with its top edge 1.5 m below the surface. Find the resultant hydrostatic force F on the gate.
A vertical rectangular gate 2 m wide sits in the wall of a tank of oil, with its top edge 2 m below the surface. Find the resultant hydrostatic force F on the gate.
d = 2 mH = 1 mb = 2 mρ = 880 kg/m³g = 9.81 m/s²
F = kN
13.Continuity & BernoulliMedium
Water flows through a horizontal pipe that narrows from 75 mm to 50 mm. In the wide section the pressure is 400 kPa and the velocity is 0.5 m/s. Ignoring losses, find the pressure p2 in the narrow section.
A fountain nozzle points straight up. Just below the nozzle the supply pipe has a diameter of 100 mm and a gauge pressure of 20 kPa. The nozzle exit diameter is 40 mm, and the height difference across the nozzle is negligible. Ignoring losses and air resistance, find the height H the jet rises above the nozzle. Use g = 9.81 m/s².
A heat engine works between a hot reservoir at 450 °C and a cold reservoir at 25 °C. It takes in 1900 kJ of heat. Find the most work Wmax it could possibly produce.
TH = 450 °CTL = 25 °CQH = 1900 kJ
Wmax = kJ
18.Heat engines & refrigeratorsHard
Two Carnot engines work in series. Engine A receives heat from a reservoir at 700 °C and rejects heat to an intermediate reservoir at temperature Tm. Engine B takes all that heat and rejects heat to a reservoir at 40 °C. Both engines produce the same work. Find Tm in °C.
TH = 700 °CTL = 40 °C
Tm = °C
19.Waves, sound & opticsMedium
A pipe closed at one end must have its harmonic number 7 at 923 Hz. The speed of sound is 343 m/s. Find the length L of the pipe.
v = 343 m/sn = 7f7 = 923 Hz
L = m
20.Waves, sound & opticsHard
An optical fibre has a core with n₁ = 1.55 and a cladding with n₂ = 1.52. Find the largest angle θa to the fibre axis at which light from air can enter the end of the fibre and still be guided by total internal reflection.
n1 = 1.55n2 = 1.52n0 = 1.00
θa = °
3Solutions
1.Kinematics
Answer: s = 16.67 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v₀ = 36/3.6 = 10 m/s
Braking distance
0 = v₀² − 2·a·s → s = v₀²/(2a) = 10²/(2·3) = 16.67 m
Answer
s = 16.67 m
2.Kinematics
Answer: hmax = 683.3 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Powered phase
v₁ = 34·3 = 102 m/s
h₁ = ½·34·3² = 153 m
Free flight up
At the top the velocity is zero.
Δh = v₁²/(2g) = 102²/(2·9.81) = 530.3 m
hmax = 153 + 530.3 = 683.3 m
Answer
hmax = 683.3 m
3.Newton’s laws
Answer: a = 0.654 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Acceleration
The net driving force is the difference of the weights; it moves the total mass.
a = (4 − 3.5)·9.81/(4 + 3.5) = 0.654 m/s²
Answer
a = 0.654 m/s²
4.Newton’s laws
Answer: d = 5.944 m
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Deceleration
Both forces point down the slope; the mass cancels.
a = 9.81·(sin 25° + 0.3·cos 25°) = 6.813 m/s²
Distance
d = v₀²/(2a) = 9²/(2·6.813) = 5.944 m
Answer
d = 5.944 m
5.Projectile motion
Answer: t = 3.04 s
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 26·cos 35° = 21.3 m/s
vy = v0·sin θ = 26·sin 35° = 14.91 m/s
Time in the air
Starting and landing at the same height: t = 2vy/g.
t = 2·14.91/9.81 = 3.04 s
Answer
t = 3.04 s
6.Projectile motion
Answer: t = 4.556 s
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 22·cos 60° = 11 m/s
vy = v0·sin θ = 22·sin 60° = 19.05 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 15 + 19.05·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (19.05 + √(363 + 294.3))/9.81 = 4.556 s
Answer
t = 4.556 s
7.Work & energy
Answer: d = 10.49 m
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Speed in base units
v = 40/3.6 = 11.11 m/s
Energy balance
½mv² = μmg·d → d = v²/(2μg) = 11.11²/(2·0.6·9.81) = 10.49 m
Answer
d = 10.49 m
Doubling the speed makes the stopping distance four times longer.
8.Work & energy
Answer: v = 4.852 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.
Speed at the top
v² = 2g(h − 2R) = 2·9.81·(4.2 − 3) = 23.54 m²/s²
v = 4.852 m/s
Answer
v = 4.852 m/s
The cart just makes it round when h = 2.5R; then N = 0 at the top.
9.Momentum & collisions
Answer: v′1 = −0.5294 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Elastic collision with a target at rest
Solving momentum and energy conservation together gives these two results.
v′1 = (3.5 − 5)/(3.5 + 5)·3 = −0.5294 m/s
v′2 = 2·3.5/(3.5 + 5)·3 = 2.471 m/s
Answer
v′1 = −0.5294 m/s
The minus sign means the first glider bounces back.
10.Momentum & collisions
Answer: v = 1040 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Rise of the block
h = L·(1 − cos θ) = 1.5·(1 − cos 35°) = 0.2713 m
Speed after impact
V = √(2·9.81·0.2713) = 2.307 m/s
Collision
v = (m + M)·V/m = 4.51·2.307/0.01 = 1040 m/s
Answer
v = 1040 m/s
11.Hydrostatic force
Answer: F = 99.33 kN
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 1.5 + 1.5/2 = 2.25 m
A = H·b = 1.5·3 = 4.5 m²
Resultant force
F = ρ·g·yc·A = 1000·9.81·2.25·4.5 = 99.33 kN
Answer
F = 99.33 kN
12.Hydrostatic force
Answer: F = 43.16 kN
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 2 + 1/2 = 2.5 m
A = H·b = 1·2 = 2 m²
Resultant force
F = ρ·g·yc·A = 880·9.81·2.5·2 = 43.16 kN
Answer
F = 43.16 kN
13.Continuity & Bernoulli
Answer: p2 = 399.5 kPa
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Exit velocity
β = 40/100 = 0.4
v2 = √(2p1/(ρ(1 − β⁴))) = √(2·20000/(1000·0.9744)) = 6.407 m/s
Height of the jet
Bernoulli along the jet: at the top the velocity is zero and the pressure is atmospheric again.
H = v2²/(2g) = 6.407²/(2·9.81) = 2.092 m
Answer
H = 2.092 m
15.Ideal gas law
Answer: V = 23.96 L
Ideal gas law: PV = nRT, with n = m/M.
Moles
n = 80/32 = 2.5 mol
T = 15 + 273.15 = 288.1 K
Volume
V = nRT/P = 2.5·8.314·288.1/250 = 23.96 L
Answer
V = 23.96 L
16.Ideal gas law
Answer: ρ = 7.939 kg/m³
Ideal gas density: ρ = PM/(RT).
Rearrange the gas law
PV = (m/M)RT → ρ = m/V = PM/(RT)
T = 90 + 273.15 = 363.1 K
Density
ρ = 600·39.95/(8.314·363.1) = 7.939 kg/m³
Answer
ρ = 7.939 kg/m³
17.Heat engines & refrigerators
Answer: Wmax = 1117 kJ
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
Absolute temperatures
TH = 450 + 273.15 = 723.1 K
TL = 25 + 273.15 = 298.1 K
Carnot efficiency
ηmax = 1 − TL/TH = 1 − 298.1/723.1 = 58.77 %
Maximum work
Wmax = ηmax·QH = 0.5877·1900 = 1117 kJ
Answer
Wmax = 1117 kJ
18.Heat engines & refrigerators
Answer: Tm = 370 °C
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
Absolute temperatures
TH = 700 + 273.15 = 973.1 K
TL = 40 + 273.15 = 313.1 K
Equal work
W = Q·(1 − Tlow/Thigh) and Q/T is the same at every reservoir, so W is proportional to the temperature drop.
Tm = (973.1 + 313.1)/2 = 643.1 K = 370 °C
Answer
Tm = 370 °C
19.Waves, sound & optics
Answer: L = 0.6503 m
Standing waves and the Doppler effect: a string fixed at both ends, or a pipe open at both ends, fits whole half-wavelengths: L = nλ/2, fn = n·v/(2L), n = 1, 2, 3, … A pipe closed at one end has a node at the closed end and an antinode at the open end: L = nλ/4 with odd n only, fn = n·v/(4L). When source or observer move along the line between them, f′ = f·(v ± vo)/(v ∓ vs): use the upper signs for motion towards each other. Two waves of nearly equal frequency beat at |f₁ − f₂|.
Wavelength
λ = v/f = 343/923 = 0.3716 m
Length
L = nλ/4 = 7·0.3716/4 = 0.6503 m
Answer
L = 0.6503 m
20.Waves, sound & optics
Answer: θa = 17.67 °
Geometric optics: at a boundary, n₁·sin θ₁ = n₂·sin θ₂ (Snell's law), with angles measured from the normal and n = c/v. Going into a slower medium the ray bends towards the normal. From a denser medium (n₁ > n₂) beyond the critical angle θc = arcsin(n₂/n₁) all light is reflected: total internal reflection. Thin lenses and spherical mirrors obey 1/f = 1/do + 1/di with the magnification m = −di/do. Sign convention: f > 0 for a converging lens and a concave mirror (f = R/2), f < 0 for a diverging lens and a convex mirror; di > 0 for a real image, di < 0 for a virtual one, and m < 0 for an inverted image.