Convert units: nm, mm and cm to m, and check whether angles are measured from the normal.
Check signs and plausibility: a virtual image has dᵢ < 0, an approaching source sounds higher, a closed pipe has only odd harmonics.
2Practice problems
1.KinematicsMedium
A driver moving at 80 km/h sees an obstacle. Her reaction time is 0.7 s, after which the car brakes with a constant deceleration of 6.5 m/s². Find the total stopping distance d from the moment she sees the obstacle.
v₀ = 80 km/htr = 0.7 sa = −6.5 m/s²
d = m
2.KinematicsHard
A ball is thrown straight up at 14 m/s from the edge of a roof 10 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.
v₀ = 14 m/sh₀ = 10 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
A 4 kg block slides down a frictionless slope at 45° to the horizontal. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.
m = 4 kgθ = 45°μ = 0g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
A 3 kg block on a ramp at 20° is connected by a light string over a frictionless pulley at the top of the ramp to a hanging 8.5 kg mass. The hanging mass moves down. The coefficient of kinetic friction between block and ramp is 0.25. Use g = 9.81 m/s². Find the acceleration a of the system.
m1 = 3 kgm2 = 8.5 kgθ = 20°μ = 0.25g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
A ball is launched at 65° above horizontal from level ground. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.
v0 = 36 m/sθ = 65°g = 9.81 m/s²
x = m
6.Projectile motionHard
A ball is launched at 35° above horizontal from the top of a 5 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.
v0 = 27 m/sθ = 35°h = 5 mg = 9.81 m/s²
t = s
7.Work & energyMedium
An 800 kg car drives up a 6° slope at a constant 72 km/h. Air resistance and rolling resistance together amount to 500 N. Find the power P the wheels must deliver, in kW.
A 1 kg block is released from rest at height 1.5 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 3.5 m long (μ = 0.25) and then runs onto a spring (k = 4000 N/m) on a smooth surface. Find the speed v of the block when it reaches the spring.
m = 1 kgh = 1.5 mL = 3.5 mμ = 0.25k = 4000 N/mg = 9.81 m/s²
v = m/s
9.Momentum & collisionsMedium
A 1800 kg car moving at 14 m/s runs into a stationary 900 kg car and the two lock together. What percentage ΔK/K of the original kinetic energy is lost?
m1 = 1800 kgv1 = 14 m/sm2 = 900 kgv2 = 0
ΔK/K = %
10.Momentum & collisionsHard
At a crossing a 1700 kg car travelling east at 18 m/s collides with a 1200 kg car travelling north at 12 m/s. The cars lock together. Find the speed v′ of the wreck just after the collision.
m1 = 1700 kgv1 = 18 m/s (E)m2 = 1200 kgv2 = 12 m/s (N)
v′ = m/s
11.Hydrostatic forceMedium
A vertical rectangular gate 2 m wide sits in the wall of a tank of water, with its top edge 1.5 m below the surface. Find the resultant hydrostatic force F on the gate.
A vertical rectangular gate 1 m wide sits in the wall of a tank of water, with its top edge 2 m below the surface. Find the resultant hydrostatic force F on the gate.
Water flows through a horizontal venturi meter with an inlet diameter of 150 mm and a throat diameter of 75 mm. The pressure at the inlet is 40 kPa higher than at the throat. Ignoring losses, find the flow rate Q.
A closed water tank has compressed air above the water at a gauge pressure of 160 kPa. Water leaves through an opening with a diameter of 50 mm, 1.5 m below the water surface, into the open air. Ignoring losses, find the flow rate Q. Use g = 9.81 m/s².
A reversible (Carnot) heat engine takes in 1400 kJ of heat from a reservoir at 400 °C and rejects 568 kJ per cycle. Find the temperature TL of the cold reservoir in °C.
TH = 400 °CQH = 1400 kJQL = 568 kJ
TL = °C
18.Heat engines & refrigeratorsHard
A heat pump keeps a house at 20 °C while it is 5 °C outside, delivering 7 kW of heat to the house. Find the highest possible coefficient of performance COPmax.
TH = 20 °CTL = 5 °CQ̇H = 7 kW
COPmax =
19.Waves, sound & opticsMedium
A small source sends sound equally in all directions. The level is 85 dB at 10 m from it. Find the level β2 at 100 m, ignoring absorption and reflections.
β1 = 85 dBr1 = 10 mr2 = 100 m
β2 = dB
20.Waves, sound & opticsHard
An object is 5 cm in front of a concave mirror with a radius of curvature of 30 cm. Find the image distance di, positive for an image in front of the mirror (real) and negative for one behind it (virtual).
do = 5 cmR = 30 cm
di = cm
3Solutions
1.Kinematics
Answer: d = 53.54 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v₀ = 80/3.6 = 22.22 m/s
Reaction distance
d1 = v₀·tr = 22.22·0.7 = 15.56 m
Braking distance
d2 = v₀²/(2a) = 22.22²/(2·6.5) = 37.99 m
Total
d = 15.56 + 37.99 = 53.54 m
Answer
d = 53.54 m
2.Kinematics
Answer: t = 3.446 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equation of motion
Up is positive and the ground is h₀ below the starting point.
−10 = 14·t − ½·9.81·t²
4.905·t² − 14·t − 10 = 0
Solve the quadratic
Only the positive root is physical.
t = (14 + √(14² + 2·9.81·10))/9.81 = 3.446 s
Answer
t = 3.446 s
3.Newton’s laws
Answer: a = 6.937 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Forces along the string
m₂·g = 83.39 N
m₁·g·sin θ = 10.07 N
μ·m₁·g·cos θ = 6.914 N
Acceleration of the system
a = (83.39 − 10.07 − 6.914)/11.5 = 5.774 m/s²
Answer
a = 5.774 m/s²
5.Projectile motion
Answer: x = 101.2 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 36·cos 65° = 15.21 m/s
vy = v0·sin θ = 36·sin 65° = 32.63 m/s
Time in the air
Starting and landing at the same height: t = 2vy/g.
t = 2·32.63/9.81 = 6.652 s
Horizontal distance
x = vx·t = 15.21·6.652 = 101.2 m
Answer
x = 101.2 m
6.Projectile motion
Answer: t = 3.453 s
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 27·cos 35° = 22.12 m/s
vy = v0·sin θ = 27·sin 35° = 15.49 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 5 + 15.49·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (15.49 + √(239.8 + 98.1))/9.81 = 3.453 s
Answer
t = 3.453 s
7.Work & energy
Answer: P = 26.41 kW
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). Power is force times speed: P = F·v.
Driving force
m·g = 800·9.81 = 7848 N
mg·sin θ = 7848·sin 6° = 820.3 N
F = 820.3 + 500 = 1320 N
Power
v = 72/3.6 = 20 m/s
P = F·v = 1320·20 = 26407 W = 26.41 kW
Answer
P = 26.41 kW
8.Work & energy
Answer: v = 3.502 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy left after the rough strip
The ramp is smooth, so only the strip removes energy.
mgh − μmgL = 9.81·(1.5 − 0.25·3.5) = 6.131 J
Speed at the spring
½mv² = mg(h − μL) → v = √(2g(h − μL)) = √(2·9.81·0.625) = 3.502 m/s
Answer
v = 3.502 m/s
9.Momentum & collisions
Answer: ΔK/K = 33.33 %
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Common velocity
v′ = m1·v1/(m1 + m2) = 1800·14/2700 = 9.333 m/s
Kinetic energy before and after
Kbefore = ½·1800·14² = 176400 J
Kafter = ½·2700·9.333² = 117600 J
Fraction lost
ΔK/K = 58800/176400 = 33.33 %
Answer
ΔK/K = 33.33 %
The lost energy goes into deformation, heat and sound.
10.Momentum & collisions
Answer: v′ = 11.66 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 1.5 + 2/2 = 2.5 m
A = H·b = 2·2 = 4 m²
Resultant force
F = ρ·g·yc·A = 1000·9.81·2.5·4 = 98.1 kN
Answer
F = 98.1 kN
12.Hydrostatic force
Answer: F = 40.47 kN
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 2 + 1.5/2 = 2.75 m
A = H·b = 1.5·1 = 1.5 m²
Resultant force
F = ρ·g·yc·A = 1000·9.81·2.75·1.5 = 40.47 kN
Answer
F = 40.47 kN
13.Continuity & Bernoulli
Answer: Q = 40.81 L/s
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Continuity
v1 = v2·(75/150)² = 0.25·v2
Bernoulli between inlet and throat
The pipe is horizontal, so only pressure and velocity change.
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Bernoulli from the surface to the jet
v = √(2·(160000/1000 + 9.81·1.5)) = 18.69 m/s
Flow rate
Q = A·v = 0.001963·18.69 = 0.0367 m³/s = 36.7 L/s
Answer
Q = 36.7 L/s
15.Ideal gas law
Answer: P = 3675 kPa
Ideal gas law: PV = nRT, with n = m/M.
Moles
n = m/M = 500/39.95 = 12.52 mol
T = 80 + 273.15 = 353.1 K
Pressure
P = nRT/V = 12.52·8.314·353.1/0.01 = 3675 kPa
Answer
P = 3675 kPa
16.Ideal gas law
Answer: ρ = 4.166 kg/m³
Ideal gas density: ρ = PM/(RT).
Rearrange the gas law
PV = (m/M)RT → ρ = m/V = PM/(RT)
T = 190 + 273.15 = 463.1 K
Density
ρ = 1000·16.04/(8.314·463.1) = 4.166 kg/m³
Answer
ρ = 4.166 kg/m³
17.Heat engines & refrigerators
Answer: TL = −0.04343 °C
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
Absolute temperature of the source
TH = 400 + 273.15 = 673.1 K
Reversible heat ratio
TL = TH·QL/QH = 673.1·568/1400 = 273.1 K = −0.04343 °C
Answer
TL = −0.04343 °C
18.Heat engines & refrigerators
Answer: COPmax = 19.54
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
Waves: a periodic wave moves one wavelength in one period, so v = fλ with T = 1/f. On a stretched string v = √(T/μ), with T the tension and μ = m/L the mass per metre. Sound in air travels at about 343 m/s at 20 °C, light in vacuum at c = 3.00 × 10⁸ m/s. Loudness is measured on a logarithmic scale: β = 10·log₁₀(I/I₀) dB with I₀ = 10⁻¹² W/m², so 10 times the intensity adds 10 dB. A point source spreads its power P over a sphere: I = P/(4πr²).
Intensity ratio
I₂/I₁ = (10/100)² = 0.01
New level
β₂ = 85 + 10·log₁₀(0.01) = 65 dB
Answer
β2 = 65 dB
Every doubling of the distance lowers the level by about 6 dB.
20.Waves, sound & optics
Answer: di = −7.5 cm
Geometric optics: at a boundary, n₁·sin θ₁ = n₂·sin θ₂ (Snell's law), with angles measured from the normal and n = c/v. Going into a slower medium the ray bends towards the normal. From a denser medium (n₁ > n₂) beyond the critical angle θc = arcsin(n₂/n₁) all light is reflected: total internal reflection. Thin lenses and spherical mirrors obey 1/f = 1/do + 1/di with the magnification m = −di/do. Sign convention: f > 0 for a converging lens and a concave mirror (f = R/2), f < 0 for a diverging lens and a convex mirror; di > 0 for a real image, di < 0 for a virtual one, and m < 0 for an inverted image.