Convert units: nm, mm and cm to m, and check whether angles are measured from the normal.
Check signs and plausibility: a virtual image has dᵢ < 0, an approaching source sounds higher, a closed pipe has only odd harmonics.
2Practice problems
1.KinematicsMedium
A car driving at 100 km/h brakes with a constant deceleration of 6.5 m/s² until it stops. How long does braking take? Find t.
v₀ = 100 km/ha = −6.5 m/s²v = 0
t = s
2.KinematicsHard
A model rocket is launched straight up from rest. Its engine gives it a constant upward acceleration of 30 m/s² for 2 s, after which the engine stops and the rocket moves freely. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax the rocket reaches.
a = 30 m/s²t1 = 2 sg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
A 40 kg box is pushed up a ramp at 25° to the horizontal at constant speed, by a force parallel to the ramp. The coefficient of kinetic friction is 0.2. Use g = 9.81 m/s². Find the pushing force F.
m = 40 kgθ = 25°μ = 0.2g = 9.81 m/s²
F = N
4.Newton’s lawsHard
Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 50 N pulls the front 9 kg block; the 2 kg block is towed behind. The coefficient of kinetic friction is 0.2 for both blocks. Use g = 9.81 m/s². Find the tension T in the connecting string.
m1 = 2 kgm2 = 9 kgF = 50 Nμ = 0.2g = 9.81 m/s²
T = N
5.Projectile motionMedium
A ball is launched at 60° above horizontal from level ground. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.
v0 = 14 m/sθ = 60°g = 9.81 m/s²
x = m
6.Projectile motionHard
A ball is thrown from ground level at 39 m/s and 70° above the horizontal. It lands on the flat roof of a building 20 m high, on its way down. Ignore air resistance and use g = 9.81 m/s². Find the horizontal distance x from the launch point to where it lands.
v₀ = 39 m/sθ = 70°hroof = 20 mg = 9.81 m/s²
x = m
7.Work & energyMedium
A car travelling at 120 km/h on a level road brakes hard and skids to a stop with its wheels locked. The coefficient of kinetic friction between the tyres and the road is 0.6. Find the stopping distance d.
v = 120 km/hμ = 0.6g = 9.81 m/s²
d = m
8.Work & energyHard
A 0.5 kg cart is released from rest at a height of 8.8 m on a smooth track that leads into a vertical circular loop of radius 2.5 m. Find the normal force N the track exerts on the cart at the top of the loop.
m = 0.5 kgh = 8.8 mR = 2.5 mg = 9.81 m/s²
N = N
9.Momentum & collisionsMedium
A 3 kg glider moving at 6 m/s makes a perfectly elastic head-on collision with a 4.5 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).
m1 = 3 kgm2 = 4.5 kgv1 = 6 m/sv2 = 0
v′1 = m/s
10.Momentum & collisionsHard
A 0.5 kg ball hits a wall at 30 m/s and bounces straight back at 11 m/s. The contact lasts 25 ms. Find the magnitude of the impulse J the wall gives the ball.
m = 0.5 kgvin = 30 m/svout = 11 m/sΔt = 25 ms
J = N·s
11.Hydrostatic forceMedium
A vertical rectangular gate 1.5 m wide sits in the wall of a tank of water, with its top edge 2 m below the surface. Find the resultant hydrostatic force F on the gate.
A vertical rectangular gate 3 m wide sits in the wall of a tank of glycerin, with its top edge 1 m below the surface. Find the depth ycp of the centre of pressure below the surface.
d = 1 mH = 1 mb = 3 mρ = 1260 kg/m³g = 9.81 m/s²
ycp = m
13.Continuity & BernoulliMedium
Water flows through a horizontal pipe that narrows from 75 mm to 40 mm. In the wide section the pressure is 320 kPa and the velocity is 2.5 m/s. Ignoring losses, find the pressure p2 in the narrow section.
Water flows up through a pipe that narrows from 75 mm to 25 mm while rising 7 m. At section 1 the pressure is 300 kPa and the velocity is 1.25 m/s. Ignoring losses, find the pressure p2 at section 2.
A heat engine works between a hot reservoir at 450 °C and a cold reservoir at 10 °C. It takes in 4300 kJ of heat. Find the most work Wmax it could possibly produce.
TH = 450 °CTL = 10 °CQH = 4300 kJ
Wmax = kJ
18.Heat engines & refrigeratorsHard
A heat pump delivers 13 kW of heat to a heating system at 55 °C, taking heat from a source at -10 °C. Its actual COP is 35% of the Carnot COP between these temperatures. Find the electrical power Ẇ it uses.
TH = 55 °CTL = -10 °CηII = 35%Q̇H = 13 kW
Ẇ = kW
19.Waves, sound & opticsMedium
One machine gives a sound level of 80 dB at a certain point. Find the level β at that point when 5 identical machines run at the same time (incoherent sources).
β1 = 80 dBn = 5
β = dB
20.Waves, sound & opticsHard
Light of wavelength 650 nm passes through a single slit 0.05 mm wide. Find the angle θ1 of dark fringe number 1 from the straight-through direction.
λ = 650 nma = 0.05 mmm = 1
θ1 = °
3Solutions
1.Kinematics
Answer: t = 4.274 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v₀ = 100/3.6 = 27.78 m/s
Braking time
0 = v₀ − a·t → t = v₀/a = 27.78/6.5 = 4.274 s
Answer
t = 4.274 s
2.Kinematics
Answer: hmax = 243.5 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Powered phase
v₁ = 30·2 = 60 m/s
h₁ = ½·30·2² = 60 m
Free flight up
At the top the velocity is zero.
Δh = v₁²/(2g) = 60²/(2·9.81) = 183.5 m
hmax = 60 + 183.5 = 243.5 m
Answer
hmax = 243.5 m
3.Newton’s laws
Answer: F = 237 N
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Forces along the slope
Constant speed: the forces balance.
F = m·g·sin θ + μ·m·g·cos θ
Pushing force
F = 165.8 + 71.13 = 237 N
Answer
F = 237 N
4.Newton’s laws
Answer: T = 9.091 N
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
With the same μ on both blocks, friction drops out: T = F·m₁/(m₁ + m₂).
5.Projectile motion
Answer: x = 17.3 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 14·cos 60° = 7 m/s
vy = v0·sin θ = 14·sin 60° = 12.12 m/s
Time in the air
Starting and landing at the same height: t = 2vy/g.
t = 2·12.12/9.81 = 2.472 s
Horizontal distance
x = vx·t = 7·2.472 = 17.3 m
Answer
x = 17.3 m
6.Projectile motion
Answer: x = 91.75 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
vx = 13.34 m/s, vy = 36.65 m/s
Time to land on the roof
Larger root: the ball is descending.
20 = 36.65·t − 4.905·t²
t = (36.65 + √(36.65² − 2·9.81·20))/9.81 = 6.879 s
Horizontal distance
x = vx·t = 13.34·6.879 = 91.75 m
Answer
x = 91.75 m
7.Work & energy
Answer: d = 94.39 m
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Speed in base units
v = 120/3.6 = 33.33 m/s
Energy balance
½mv² = μmg·d → d = v²/(2μg) = 33.33²/(2·0.6·9.81) = 94.39 m
Answer
d = 94.39 m
Doubling the speed makes the stopping distance four times longer.
8.Work & energy
Answer: N = 10.01 N
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.
Speed at the top
v² = 2g(h − 2R) = 2·9.81·(8.8 − 5) = 74.56 m²/s²
Forces at the top
m·g = 0.5·9.81 = 4.905 N
N = mv²/R − mg = 0.5·74.56/2.5 − 4.905 = 10.01 N
Answer
N = 10.01 N
The cart just makes it round when h = 2.5R; then N = 0 at the top.
9.Momentum & collisions
Answer: v′1 = −1.2 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Elastic collision with a target at rest
Solving momentum and energy conservation together gives these two results.
v′1 = (3 − 4.5)/(3 + 4.5)·6 = −1.2 m/s
v′2 = 2·3/(3 + 4.5)·6 = 4.8 m/s
Answer
v′1 = −1.2 m/s
The minus sign means the first glider bounces back.
10.Momentum & collisions
Answer: J = 20.5 N·s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Change in momentum
J = m·Δv = 0.5·(11 + 30) = 20.5 N·s
Answer
J = 20.5 N·s
11.Hydrostatic force
Answer: F = 60.7 kN
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 2 + 1.5/2 = 2.75 m
A = H·b = 1.5·1.5 = 2.25 m²
Resultant force
F = ρ·g·yc·A = 1000·9.81·2.75·2.25 = 60.7 kN
Answer
F = 60.7 kN
12.Hydrostatic force
Answer: ycp = 1.556 m
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 1 + 1/2 = 1.5 m
A = H·b = 1·3 = 3 m²
Resultant force
F = ρ·g·yc·A = 1260·9.81·1.5·3 = 55.62 kN
Centre of pressure
Pressure grows with depth, so the resultant acts below the centroid.
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
Absolute temperatures
TH = 450 + 273.15 = 723.1 K
TL = 10 + 273.15 = 283.1 K
Carnot efficiency
ηmax = 1 − TL/TH = 1 − 283.1/723.1 = 60.84 %
Maximum work
Wmax = ηmax·QH = 0.6084·4300 = 2616 kJ
Answer
Wmax = 2616 kJ
18.Heat engines & refrigerators
Answer: Ẇ = 7.357 kW
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
Absolute temperatures
TH = 55 + 273.15 = 328.1 K
TL = -10 + 273.15 = 263.1 K
Carnot and actual COP
COPmax = 328.1/(328.1 − 263.1) = 5.048
COP = 0.35·5.048 = 1.767
Power input
Ẇ = Q̇H/COP = 13/1.767 = 7.357 kW
Answer
Ẇ = 7.357 kW
19.Waves, sound & optics
Answer: β = 86.99 dB
Waves: a periodic wave moves one wavelength in one period, so v = fλ with T = 1/f. On a stretched string v = √(T/μ), with T the tension and μ = m/L the mass per metre. Sound in air travels at about 343 m/s at 20 °C, light in vacuum at c = 3.00 × 10⁸ m/s. Loudness is measured on a logarithmic scale: β = 10·log₁₀(I/I₀) dB with I₀ = 10⁻¹² W/m², so 10 times the intensity adds 10 dB. A point source spreads its power P over a sphere: I = P/(4πr²).
Total intensity
I = 5·I₁
Level
β = 80 + 10·log₁₀(5) = 86.99 dB
Answer
β = 86.99 dB
20.Waves, sound & optics
Answer: θ1 = 0.7449 °
Interference and diffraction: light from two slits a distance d apart reaches a point on the screen with a path difference d·sin θ. Bright fringes appear where d·sin θ = mλ (m = 0, ±1, ±2, …). For a screen at distance L ≫ d, the m-th bright fringe is at y = mλL/d and the fringe spacing is Δy = λL/d. A grating with N lines per millimetre has d = 1/N and sharp maxima at d·sin θ = mλ; since sin θ ≤ 1, the highest order is the largest whole number m ≤ d/λ. A single slit of width a has dark fringes at a·sin θ = mλ, m = ±1, ±2, …