Physics for Engineers: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Hydrostatic force

Pressure at depth
p = ρgh
Force on a vertical wall
F = ρg·hc·A
Centre of pressure
yp = yc + Ic/(ycA)
Rectangle
Ic = bH³/12

Continuity & Bernoulli

Continuity
A1v1 = A2v2
Bernoulli
p1 + ½ρv1² + ρgz1 = p2 + ½ρv2² + ρgz2
Flow rate
Q = A·v
Circle area
A = πd²/4

Ideal gas law

Ideal gas law
pV = nRT
Gas constant
R = 8.314 J/(mol·K)
Combined gas law
p1V1/T1 = p2V2/T2
Moles
n = m/M
Temperature
T[K] = T[°C] + 273.15

Heat engines & refrigerators

Efficiency
η = W/QH = 1 − QC/QH
Carnot efficiency
ηC = 1 − TC/TH (kelvin)
Refrigerator COP
COPR = QC/W
Heat pump COP
COPHP = QH/W = COPR + 1
Energy balance
QH = W + QC

Waves, sound & optics

Wave speed
v = fλ, T = 1/f
String
v = √(T/μ), μ = m/L
Sound level
β = 10·log10(I/I0), I0 = 10⁻¹² W/m²
Point source
I = P/(4πr²)
Standing waves
string or open pipe fn = n·v/(2L); closed pipe fn = n·v/(4L), n odd
Doppler effect
f′ = f·(v ± vo)/(v ∓ vs)
Refractive index
n = c/v, λ = λ0/n
Snell’s law
n1sin θ1 = n2sin θ2
Critical angle
sin θc = n2/n1
Optical fibre
NA = sin θa = √(n1² − n2²)
Lenses and mirrors
1/f = 1/do + 1/di, m = −di/do, mirror f = R/2
Double slit
d·sin θ = mλ, ym = mλL/d
Grating
d = 1/N, d·sin θ = mλ, mmax ≤ d/λ
Single slit
a·sin θ = mλ (dark), w = 2λL/a

Method

  1. Identify the kind of problem: wave speed, sound level, standing wave, Doppler, refraction, lens or mirror, or interference.
  2. Write the relation first: v = fλ, β = 10·log(I/I₀), fₙ = n·v/(2L) or n·v/(4L), f′ = f(v ± vo)/(v ∓ vs), n₁sin θ₁ = n₂sin θ₂, 1/f = 1/d₀ + 1/dᵢ, d·sin θ = mλ.
  3. Convert units: nm, mm and cm to m, and check whether angles are measured from the normal.
  4. Check signs and plausibility: a virtual image has dᵢ < 0, an approaching source sounds higher, a closed pipe has only odd harmonics.

2Practice problems

1.KinematicsMedium
a = ?s = 1300 m

A plane needs a speed of 260 km/h to take off and the usable runway is 1300 m long. Starting from rest, what constant acceleration a does it need?

v₀ = 0v = 260 km/hs = 1300 m
a = m/s²
2.KinematicsHard
v₀ = 17 m/s40 m

A ball is thrown straight up at 17 m/s from the edge of a roof 40 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 17 m/sh₀ = 40 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
θ = 30°a = ?m = 8 kg

An 8 kg block slides down a frictionless slope at 30° to the horizontal. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 8 kgθ = 30°μ = 0g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
8 kg5 kgTF = 90 Nμ = 0.15

Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 90 N pulls the front 5 kg block; the 8 kg block is towed behind. The coefficient of kinetic friction is 0.15 for both blocks. Use g = 9.81 m/s². Find the tension T in the connecting string.

m1 = 8 kgm2 = 5 kgF = 90 Nμ = 0.15g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = ?65°R = 70 m

A ball is launched from level ground at 65° above the horizontal and lands 70 m away. Ignore air resistance and use g = 9.81 m/s². Find the launch speed v0.

θ = 65°R = 70 mg = 9.81 m/s²
v0 = m/s
6.Projectile motionHard
h = 30 mv0​ = 32 m/s60°H = ?

A ball is launched at 32 m/s and 60° above the horizontal from the top of a 30 m cliff. Ignore air resistance and use g = 9.81 m/s². Find the greatest height H above the ground at the foot of the cliff.

v₀ = 32 m/sθ = 60°h = 30 mg = 9.81 m/s²
H = m
7.Work & energyMedium
54 km/h3°1800 kg

A 1800 kg car drives up a 3° slope at a constant 54 km/h. Air resistance and rolling resistance together amount to 750 N. Find the power P the wheels must deliver, in kW.

m = 1800 kgθ = 3°Fr = 750 Nv = 54 km/hg = 9.81 m/s²
P = kW
8.Work & energyHard
h = 1 mL = 2.5 mμ = 0.25k = 4000 N/m

A 1 kg block is released from rest at height 1 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 2.5 m long (μ = 0.25) and then runs onto a spring (k = 4000 N/m) on a smooth surface. Find the maximum compression x of the spring.

m = 1 kgh = 1 mL = 2.5 mμ = 0.25k = 4000 N/mg = 9.81 m/s²
x = cm
9.Momentum & collisionsMedium
1.5 kg6 m/s2.5 kg

A 1.5 kg glider moving at 6 m/s makes a perfectly elastic head-on collision with a 2.5 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).

m1 = 1.5 kgm2 = 2.5 kgv1 = 6 m/sv2 = 0
v′1 = m/s
10.Momentum & collisionsHard
1500 kgv1​ = ?1400 kg

A 1500 kg car runs into a parked 1400 kg car. The wrecks lock together and skid 13 m before stopping. The coefficient of kinetic friction between tyres and road is 0.75. Use g = 9.81 m/s². Find the speed v1 of the first car just before the collision.

m1 = 1500 kgm2 = 1400 kgd = 13 mμ = 0.75g = 9.81 m/s²
v1 = m/s
11.Hydrostatic forceMedium
gated = 4 mH = 1 m

A vertical rectangular gate 1.5 m wide sits in the wall of a tank of water, with its top edge 4 m below the surface. Find the resultant hydrostatic force F on the gate.

d = 4 mH = 1 mb = 1.5 mρ = 1000 kg/m³g = 9.81 m/s²
F = kN
12.Hydrostatic forceHard
gated = 1.5 mH = 2.5 m

A vertical rectangular gate 2 m wide sits in the wall of a tank of glycerin, with its top edge 1.5 m below the surface. Find the depth ycp of the centre of pressure below the surface.

d = 1.5 mH = 2.5 mb = 2 mρ = 1260 kg/m³g = 9.81 m/s²
ycp = m
13.Continuity & BernoulliMedium
Q = ?d = 50 mm, Cd​ = 0.62h = 3 m

Water drains from a large open tank through a sharp-edged orifice with a diameter of 50 mm. The water level is kept 3 m above the orifice and the discharge coefficient is 0.62. Find the flow rate Q. Use g = 9.81 m/s².

d = 50 mmh = 3 mCd = 0.62g = 9.81 m/s²
Q = L/s
14.Continuity & BernoulliHard
12d1​ = 75 mm, p1​ = 280 kPad2​ = 50 mm, p2​ = ?Δz = 2 m

Water flows up through a pipe that narrows from 75 mm to 50 mm while rising 2 m. At section 1 the pressure is 280 kPa and the velocity is 2 m/s. Ignoring losses, find the pressure p2 at section 2.

d1 = 75 mmd2 = 50 mmp1 = 280 kPav1 = 2 m/sΔz = 2 mρ = 1000 kg/m³
p2 = kPa
15.Ideal gas lawMedium
450 g of CH₄V = 20 LT = 30 °CP = ?

A tank of 20 L contains 450 g of CH₄ at 30 °C. Treat it as an ideal gas and find the pressure P.

m = 450 gM = 16.04 g/molV = 20 LT = 30 °CR = 8.314 J/(mol·K)
P = kPa
16.Ideal gas lawHard
CO₂, M = 44.01 g/molP = 1000 kPaT = 200 °Cρ = ?

Find the density ρ of CO₂ at 1000 kPa and 200 °C, treating it as an ideal gas.

M = 44.01 g/molP = 1000 kPaT = 200 °CR = 8.314 J/(mol·K)
ρ = kg/m³
17.Heat engines & refrigeratorsMedium
TH​ = 300 °CTL​ = 30 °CEQH​QL​W

A heat engine works between a hot reservoir at 300 °C and a cold reservoir at 30 °C. Find the highest possible thermal efficiency ηmax.

TH = 300 °CTL = 30 °C
ηmax = %
18.Heat engines & refrigeratorsHard
TH​ = 28 °CTL​ = -10 °CRQ̇H​Q̇L​ = 3.5 kWẆ = ?

A refrigerator keeps its cold space at -10 °C in a kitchen at 28 °C, removing heat from the cold space at 3.5 kW. Find the minimum power input Ẇmin.

TH = 28 °CTL = -10 °CQ̇L = 3.5 kW
Ẇmin = kW
19.Waves, sound & opticsMedium
40°90°n1​ = ?air, n2​ = 1.00

Light inside a transparent block is totally reflected at the boundary with air (n = 1.00) for every angle of incidence above 40°. Find the refractive index n1 of the block.

θc = 40°n2 = 1.00
n1 =
20.Waves, sound & opticsHard
SO25 m/sf = 35 kHz

A parking sensor at rest sends ultrasound of 35 kHz towards a car that moves away at 25 m/s. Find the frequency f″ of the echo received back at the sensor (speed of sound 343 m/s).

f = 35 kHzu = 25 m/sv = 343 m/s
f″ = Hz

3Solutions

1.Kinematics

Answer: a = 2.006 m/s²

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v = 260/3.6 = 72.22 m/s

Acceleration

a = v²/(2s) = 72.22²/(2·1300) = 2.006 m/s²

Answer

a = 2.006 m/s²
2.Kinematics

Answer: t = 5.073 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−40 = 17·t − ½·9.81·t²
4.905·t² − 17·t − 40 = 0

Solve the quadratic

Only the positive root is physical.

t = (17 + √(17² + 2·9.81·40))/9.81 = 5.073 s

Answer

t = 5.073 s
3.Newton’s laws

Answer: a = 4.905 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 30° − 0·cos 30°) = 9.81·(0.5 − 0) = 4.905 m/s²

Answer

a = 4.905 m/s²
4.Newton’s laws

Answer: T = 55.38 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Whole system

a = (F − μ·(m1 + m2)·g)/(m1 + m2) = (90 − 19.13)/13 = 5.452 m/s²

Rear block alone

T = m1·(a + μ·g) = 8·(5.452 + 1.472) = 55.38 N

Answer

T = 55.38 N

With the same μ on both blocks, friction drops out: T = F·m₁/(m₁ + m₂).

5.Projectile motion

Answer: v0 = 29.94 m/s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Solve the range formula for v₀

v₀ = √(g·R/sin 2θ) = √(9.81·70/sin 130°) = 29.94 m/s

Answer

v0 = 29.94 m/s
6.Projectile motion

Answer: H = 69.14 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Vertical launch speed

vy = 32·sin 60° = 27.71 m/s

Rise above the cliff

Δh = vy²/(2g) = 27.71²/(2·9.81) = 39.14 m

Height above the ground

H = 30 + 39.14 = 69.14 m

Answer

H = 69.14 m
7.Work & energy

Answer: P = 25.11 kW

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). Power is force times speed: P = F·v.

Driving force

m·g = 1800·9.81 = 17658 N
mg·sin θ = 17658·sin 3° = 924.1 N
F = 924.1 + 750 = 1674 N

Power

v = 54/3.6 = 15 m/s
P = F·v = 1674·15 = 25112 W = 25.11 kW

Answer

P = 25.11 kW
8.Work & energy

Answer: x = 4.289 cm

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 9.81·(1 − 0.25·2.5) = 3.679 J

Maximum compression

½kx² = 3.679 → x = √(2·3.679/4000) = 0.04289 m = 4.289 cm

Answer

x = 4.289 cm
9.Momentum & collisions

Answer: v′1 = −1.5 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (1.5 − 2.5)/(1.5 + 2.5)·6 = −1.5 m/s
v′2 = 2·1.5/(1.5 + 2.5)·6 = 4.5 m/s

Answer

v′1 = −1.5 m/s

The minus sign means the first glider bounces back.

10.Momentum & collisions

Answer: v1 = 26.74 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Speed after the collision

V = √(2·μ·g·d) = √(2·0.75·9.81·13) = 13.83 m/s

Momentum in the collision

m1·v1 = (m1 + m2)·V → v1 = 2900·13.83/1500 = 26.74 m/s

Answer

v1 = 26.74 m/s
(96.26 km/h)
11.Hydrostatic force

Answer: F = 66.22 kN

Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.

Centroid depth and area

yc = d + H/2 = 4 + 1/2 = 4.5 m
A = H·b = 1·1.5 = 1.5 m²
gated = 4 mH = 1 mF

Resultant force

F = ρ·g·yc·A = 1000·9.81·4.5·1.5 = 66.22 kN

Answer

F = 66.22 kN
12.Hydrostatic force

Answer: ycp = 2.939 m

Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.

Centroid depth and area

yc = d + H/2 = 1.5 + 2.5/2 = 2.75 m
A = H·b = 2.5·2 = 5 m²
gated = 1.5 mH = 2.5 mF

Resultant force

F = ρ·g·yc·A = 1260·9.81·2.75·5 = 170 kN

Centre of pressure

Pressure grows with depth, so the resultant acts below the centroid.

Ic = b·H³/12 = 2·2.5³/12 = 2.604 m⁴
ycp = yc + Ic/(yc·A) = 2.75 + 2.604/(2.75·5) = 2.939 m

Answer

ycp = 2.939 m
13.Continuity & Bernoulli

Answer: Q = 9.34 L/s

Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.

Ideal jet velocity

√(2gh) = √(2·9.81·3) = 7.672 m/s

Actual flow rate

The discharge coefficient accounts for the contraction of the jet and friction at the edge.

Q = Cd·A·√(2gh) = 0.62·0.001963·7.672 = 0.00934 m³/s = 9.34 L/s

Answer

Q = 9.34 L/s
14.Continuity & Bernoulli

Answer: p2 = 252.3 kPa

Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.

Continuity and Bernoulli

Work in Pa, then divide by 1000 to get kPa.

v2 = v1·(d1/d2)² = 2·(75/50)² = 4.5 m/s
½ρ(v1² − v2²) = ½·1000·(2² − 4.5²)/1000 = −8.125 kPa
ρgΔz = 1000·9.81·2/1000 = 19.62 kPa
p2 = p1 + ½ρ(v1² − v2²) − ρgΔz = 280 + (−8.125) − 19.62 = 252.3 kPa

Answer

p2 = 252.3 kPa
15.Ideal gas law

Answer: P = 3535 kPa

Ideal gas law: PV = nRT, with n = m/M.

Moles

n = m/M = 450/16.04 = 28.05 mol
T = 30 + 273.15 = 303.1 K

Pressure

P = nRT/V = 28.05·8.314·303.1/0.02 = 3535 kPa

Answer

P = 3535 kPa
16.Ideal gas law

Answer: ρ = 11.19 kg/m³

Ideal gas density: ρ = PM/(RT).

Rearrange the gas law

PV = (m/M)RT → ρ = m/V = PM/(RT)
T = 200 + 273.15 = 473.1 K

Density

ρ = 1000·44.01/(8.314·473.1) = 11.19 kg/m³

Answer

ρ = 11.19 kg/m³
17.Heat engines & refrigerators

Answer: ηmax = 47.11 %

Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.

Absolute temperatures

TH = 300 + 273.15 = 573.1 K
TL = 30 + 273.15 = 303.1 K

Carnot efficiency

ηmax = 1 − TL/TH = 1 − 303.1/573.1 = 47.11 %

Answer

ηmax = 47.11 %
18.Heat engines & refrigerators

Answer: Ẇmin = 0.5054 kW

Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.

Absolute temperatures

TH = 28 + 273.15 = 301.1 K
TL = -10 + 273.15 = 263.1 K

Best possible COP

COPR,max = TL/(TH − TL) = 263.1/(301.1 − 263.1) = 6.925

Minimum power

The least work is needed by a reversible machine, which has the highest COP.

Ẇmin = Q̇L/COP = 3.5/6.925 = 0.5054 kW

Answer

Ẇmin = 0.5054 kW
19.Waves, sound & optics

Answer: n1 = 1.556

Geometric optics: at a boundary, n₁·sin θ₁ = n₂·sin θ₂ (Snell's law), with angles measured from the normal and n = c/v. Going into a slower medium the ray bends towards the normal. From a denser medium (n₁ > n₂) beyond the critical angle θc = arcsin(n₂/n₁) all light is reflected: total internal reflection. Thin lenses and spherical mirrors obey 1/f = 1/do + 1/di with the magnification m = −di/do. Sign convention: f > 0 for a converging lens and a concave mirror (f = R/2), f < 0 for a diverging lens and a convex mirror; di > 0 for a real image, di < 0 for a virtual one, and m < 0 for an inverted image.

Refractive index of the block

n₁ = n₂/sin θc = 1.00/0.6428 = 1.556

Answer

n1 = 1.556
20.Waves, sound & optics

Answer: f″ = 30245 Hz

Standing waves and the Doppler effect: a string fixed at both ends, or a pipe open at both ends, fits whole half-wavelengths: L = nλ/2, fn = n·v/(2L), n = 1, 2, 3, … A pipe closed at one end has a node at the closed end and an antinode at the open end: L = nλ/4 with odd n only, fn = n·v/(4L). When source or observer move along the line between them, f′ = f·(v ± vo)/(v ∓ vs): use the upper signs for motion towards each other. Two waves of nearly equal frequency beat at |f₁ − f₂|.

Frequency at the car

f′ = 35000·(343 − 25)/343 = 32449 Hz

Frequency of the echo

f″ = f′·343/(343 + 25) = 30245 Hz

Answer

f″ = 30245 Hz

ExamProblems · examproblems.com/courses/physics-for-engineers