Convert units: nm, mm and cm to m, and check whether angles are measured from the normal.
Check signs and plausibility: a virtual image has dᵢ < 0, an approaching source sounds higher, a closed pipe has only odd harmonics.
2Practice problems
1.KinematicsMedium
A car driving at 60 km/h brakes with a constant deceleration of 7.5 m/s² until it stops. Find the braking distance s.
v₀ = 60 km/ha = −7.5 m/s²v = 0
s = m
2.KinematicsHard
A ball is thrown straight up at 20 m/s from the edge of a roof 15 m above the ground. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax above the ground.
v₀ = 20 m/sh₀ = 15 mg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
A 20 kg box is pushed up a ramp at 20° to the horizontal at constant speed, by a force parallel to the ramp. The coefficient of kinetic friction is 0.25. Use g = 9.81 m/s². Find the pushing force F.
m = 20 kgθ = 20°μ = 0.25g = 9.81 m/s²
F = N
4.Newton’s lawsHard
A 4 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 1.5 kg mass. The table is frictionless. Use g = 9.81 m/s². Find the acceleration a of the system.
m1 = 4 kgm2 = 1.5 kgμ = 0g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
A ball is kicked from level ground at 34 m/s and 35° above the horizontal towards a wall 33 m away. Ignore air resistance and use g = 9.81 m/s². At what height y does the ball pass the wall?
v₀ = 34 m/sθ = 35°x = 33 mg = 9.81 m/s²
y = m
6.Projectile motionHard
A ball is launched at 20° above horizontal from the top of a 60 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.
v0 = 19 m/sθ = 20°h = 60 mg = 9.81 m/s²
t = s
7.Work & energyMedium
A car travelling at 90 km/h on a level road brakes hard and skids to a stop with its wheels locked. The coefficient of kinetic friction between the tyres and the road is 0.7. Find the stopping distance d.
v = 90 km/hμ = 0.7g = 9.81 m/s²
d = m
8.Work & energyHard
A 4 kg block is released from rest at height 4 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 3.5 m long (μ = 0.25) and then runs onto a spring (k = 1000 N/m) on a smooth surface. Find the speed v of the block when it reaches the spring.
m = 4 kgh = 4 mL = 3.5 mμ = 0.25k = 1000 N/mg = 9.81 m/s²
v = m/s
9.Momentum & collisionsMedium
A 2.5 kg glider moving at 10 m/s makes a perfectly elastic head-on collision with a 1 kg glider at rest on a frictionless track. Find the velocity v′2 of the second glider after the collision.
m1 = 2.5 kgm2 = 1 kgv1 = 10 m/sv2 = 0
v′2 = m/s
10.Momentum & collisionsHard
A 0.3 kg ball hits a wall at 23 m/s and bounces straight back at 6 m/s. The contact lasts 40 ms. Find the magnitude of the impulse J the wall gives the ball.
m = 0.3 kgvin = 23 m/svout = 6 m/sΔt = 40 ms
J = N·s
11.Hydrostatic forceMedium
A vertical rectangular gate 3 m wide sits in the wall of a tank of water, with its top edge 2.5 m below the surface. Find the resultant hydrostatic force F on the gate.
A vertical rectangular gate 3 m wide sits in the wall of a tank of glycerin, with its top edge 2 m below the surface. Find the resultant hydrostatic force F on the gate.
d = 2 mH = 3 mb = 3 mρ = 1260 kg/m³g = 9.81 m/s²
F = kN
13.Continuity & BernoulliMedium
A pitot-static tube in a wind tunnel reads a difference of 600 Pa between the stagnation pressure and the static pressure. The air density is 1.2 kg/m³. Find the air speed v.
p0 − p = 600 Paρ = 1.2 kg/m³
v = m/s
14.Continuity & BernoulliHard
Water flows up through a pipe that narrows from 100 mm to 40 mm while rising 1 m. At section 1 the pressure is 320 kPa and the velocity is 1.25 m/s. Ignoring losses, find the pressure p2 at section 2.
A heat engine receives heat from a source at 750 °C and rejects heat to the surroundings at 15 °C. Its actual thermal efficiency is 40%. Find its second-law efficiency ηII, the ratio of the actual efficiency to the Carnot efficiency.
TH = 750 °CTL = 15 °Cη = 40%
ηII = %
18.Heat engines & refrigeratorsHard
A refrigerator keeps its cold space at 2 °C in a kitchen at 32 °C, removing heat from the cold space at 1 kW. Find the minimum power input Ẇmin.
TH = 32 °CTL = 2 °CQ̇L = 1 kW
Ẇmin = kW
19.Waves, sound & opticsMedium
A small source sends sound equally in all directions. The level is 70 dB at 10 m from it. Find the level β2 at 100 m, ignoring absorption and reflections.
β1 = 70 dBr1 = 10 mr2 = 100 m
β2 = dB
20.Waves, sound & opticsHard
Light of wavelength 550 nm falls on two slits 0.2 mm apart. The screen is 1 m away. Find the distance y1 from the central bright fringe to bright fringe number 1.
λ = 550 nmd = 0.2 mmL = 1 mm = 1
y1 = mm
3Solutions
1.Kinematics
Answer: s = 18.52 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v₀ = 60/3.6 = 16.67 m/s
Braking distance
0 = v₀² − 2·a·s → s = v₀²/(2a) = 16.67²/(2·7.5) = 18.52 m
Answer
s = 18.52 m
2.Kinematics
Answer: hmax = 35.39 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Rise above the roof
0 = v₀² − 2·g·Δh → Δh = 20²/(2·9.81) = 20.39 m
Height above the ground
hmax = 15 + 20.39 = 35.39 m
Answer
hmax = 35.39 m
3.Newton’s laws
Answer: F = 113.2 N
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Forces along the slope
Constant speed: the forces balance.
F = m·g·sin θ + μ·m·g·cos θ
Pushing force
F = 67.1 + 46.09 = 113.2 N
Answer
F = 113.2 N
4.Newton’s laws
Answer: a = 2.675 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Time to the wall
vx = 34·cos 35° = 27.85 m/s
t = x/vx = 33/27.85 = 1.185 s
Height at that time
y = 19.5·1.185 − ½·9.81·1.185² = 16.22 m
Answer
y = 16.22 m
The ball is still rising at the wall.
6.Projectile motion
Answer: t = 4.222 s
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 19·cos 20° = 17.85 m/s
vy = v0·sin θ = 19·sin 20° = 6.498 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 60 + 6.498·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (6.498 + √(42.23 + 1177))/9.81 = 4.222 s
Answer
t = 4.222 s
7.Work & energy
Answer: d = 45.51 m
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Speed in base units
v = 90/3.6 = 25 m/s
Energy balance
½mv² = μmg·d → d = v²/(2μg) = 25²/(2·0.7·9.81) = 45.51 m
Answer
d = 45.51 m
Doubling the speed makes the stopping distance four times longer.
8.Work & energy
Answer: v = 7.83 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy left after the rough strip
The ramp is smooth, so only the strip removes energy.
mgh − μmgL = 39.24·(4 − 0.25·3.5) = 122.6 J
Speed at the spring
½mv² = mg(h − μL) → v = √(2g(h − μL)) = √(2·9.81·3.125) = 7.83 m/s
Answer
v = 7.83 m/s
9.Momentum & collisions
Answer: v′2 = 14.29 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Elastic collision with a target at rest
Solving momentum and energy conservation together gives these two results.
v′1 = (2.5 − 1)/(2.5 + 1)·10 = 4.286 m/s
v′2 = 2·2.5/(2.5 + 1)·10 = 14.29 m/s
Answer
v′2 = 14.29 m/s
10.Momentum & collisions
Answer: J = 8.7 N·s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Change in momentum
J = m·Δv = 0.3·(6 + 23) = 8.7 N·s
Answer
J = 8.7 N·s
11.Hydrostatic force
Answer: F = 143.5 kN
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 2.5 + 1.5/2 = 3.25 m
A = H·b = 1.5·3 = 4.5 m²
Resultant force
F = ρ·g·yc·A = 1000·9.81·3.25·4.5 = 143.5 kN
Answer
F = 143.5 kN
12.Hydrostatic force
Answer: F = 389.4 kN
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 2 + 3/2 = 3.5 m
A = H·b = 3·3 = 9 m²
Resultant force
F = ρ·g·yc·A = 1260·9.81·3.5·9 = 389.4 kN
Answer
F = 389.4 kN
13.Continuity & Bernoulli
Answer: v = 31.62 m/s
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Bernoulli to the stagnation point
The flow comes to rest at the tip, so its kinetic energy shows up as extra pressure.
p0 − p = ½ρv²
v = √(2·600/1.2) = 31.62 m/s
Answer
v = 31.62 m/s
14.Continuity & Bernoulli
Answer: p2 = 280.5 kPa
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Combined gas law: for a fixed amount of ideal gas, P1V1/T1 = P2V2/T2.
Absolute temperatures
T1 = 298.1 K, T2 = 353.1 K
Combined gas law
V2 = V1·(P1/P2)·(T2/T1) = 20·(300/550)·(353.1/298.1) = 12.92 L
Answer
V2 = 12.92 L
17.Heat engines & refrigerators
Answer: ηII = 55.68 %
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
Absolute temperatures
TH = 750 + 273.15 = 1023 K
TL = 15 + 273.15 = 288.1 K
Carnot efficiency
ηCarnot = 1 − 288.1/1023 = 71.84 %
Second-law efficiency
ηII = η/ηCarnot = 40/71.84 = 55.68 %
Answer
ηII = 55.68 %
18.Heat engines & refrigerators
Answer: Ẇmin = 0.109 kW
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
The least work is needed by a reversible machine, which has the highest COP.
Ẇmin = Q̇L/COP = 1/9.172 = 0.109 kW
Answer
Ẇmin = 0.109 kW
19.Waves, sound & optics
Answer: β2 = 50 dB
Waves: a periodic wave moves one wavelength in one period, so v = fλ with T = 1/f. On a stretched string v = √(T/μ), with T the tension and μ = m/L the mass per metre. Sound in air travels at about 343 m/s at 20 °C, light in vacuum at c = 3.00 × 10⁸ m/s. Loudness is measured on a logarithmic scale: β = 10·log₁₀(I/I₀) dB with I₀ = 10⁻¹² W/m², so 10 times the intensity adds 10 dB. A point source spreads its power P over a sphere: I = P/(4πr²).
Intensity ratio
I₂/I₁ = (10/100)² = 0.01
New level
β₂ = 70 + 10·log₁₀(0.01) = 50 dB
Answer
β2 = 50 dB
Every doubling of the distance lowers the level by about 6 dB.
20.Waves, sound & optics
Answer: y1 = 2.75 mm
Interference and diffraction: light from two slits a distance d apart reaches a point on the screen with a path difference d·sin θ. Bright fringes appear where d·sin θ = mλ (m = 0, ±1, ±2, …). For a screen at distance L ≫ d, the m-th bright fringe is at y = mλL/d and the fringe spacing is Δy = λL/d. A grating with N lines per millimetre has d = 1/N and sharp maxima at d·sin θ = mλ; since sin θ ≤ 1, the highest order is the largest whole number m ≤ d/λ. A single slit of width a has dark fringes at a·sin θ = mλ, m = ±1, ±2, …