Convert units: nm, mm and cm to m, and check whether angles are measured from the normal.
Check signs and plausibility: a virtual image has dᵢ < 0, an approaching source sounds higher, a closed pipe has only odd harmonics.
2Practice problems
1.KinematicsMedium
A driver moving at 36 km/h sees an obstacle. Her reaction time is 0.6 s, after which the car brakes with a constant deceleration of 7 m/s². Find the total stopping distance d from the moment she sees the obstacle.
v₀ = 36 km/htr = 0.6 sa = −7 m/s²
d = m
2.KinematicsHard
A model rocket is launched straight up from rest. Its engine gives it a constant upward acceleration of 22 m/s² for 3 s, after which the engine stops and the rocket moves freely. Ignore air resistance and use g = 9.81 m/s². How long after launch does it hit the ground? Find t.
a = 22 m/s²t1 = 3 sg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
A box slides across a level floor with an initial speed of 9.5 m/s and comes to rest after 15 m. Use g = 9.81 m/s². Find the coefficient of kinetic friction μ.
v₀ = 9.5 m/sd = 15 mg = 9.81 m/s²
μ =
4.Newton’s lawsHard
A 2 kg block on a ramp at 30° is connected by a light string over a frictionless pulley at the top of the ramp to a hanging 2.5 kg mass. The hanging mass moves down. The ramp is frictionless. Use g = 9.81 m/s². Find the tension T in the string.
m1 = 2 kgm2 = 2.5 kgθ = 30°μ = 0g = 9.81 m/s²
T = N
5.Projectile motionMedium
A ball is launched at 25° above horizontal from level ground. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.
v0 = 40 m/sθ = 25°g = 9.81 m/s²
x = m
6.Projectile motionHard
A ball is launched at 45° above horizontal from the top of a 55 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.
v0 = 17 m/sθ = 45°h = 55 mg = 9.81 m/s²
x = m
7.Work & energyMedium
A car travelling at 110 km/h on a level road brakes hard and skids to a stop with its wheels locked. The coefficient of kinetic friction between the tyres and the road is 0.5. Find the stopping distance d.
v = 110 km/hμ = 0.5g = 9.81 m/s²
d = m
8.Work & energyHard
A 2.5 kg block is released from rest at height 3 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 2 m long (μ = 0.25) and then runs onto a spring (k = 1500 N/m) on a smooth surface. Find the maximum compression x of the spring.
m = 2.5 kgh = 3 mL = 2 mμ = 0.25k = 1500 N/mg = 9.81 m/s²
x = cm
9.Momentum & collisionsMedium
An 11 kg projectile moving horizontally at 24 m/s explodes into two fragments that move along the same line. The 5 kg fragment continues forwards at 61 m/s. Find the velocity v′2 of the 6 kg fragment (positive in the original direction).
M = 11 kgu = 24 m/sm1 = 5 kgv′1 = 61 m/sm2 = 6 kg
v′2 = m/s
10.Momentum & collisionsHard
A 20 g bullet is fired horizontally into a 1.5 kg block hanging from light strings 1.5 m long, and stays in it. The strings swing out to a largest angle of 25° from the vertical. Use g = 9.81 m/s². Find the speed v of the bullet before impact.
m = 20 gM = 1.5 kgL = 1.5 mθ = 25°g = 9.81 m/s²
v = m/s
11.Hydrostatic forceMedium
A vertical rectangular gate 1.5 m wide sits in the wall of a tank of water, with its top edge 4 m below the surface. Find the resultant hydrostatic force F on the gate.
A vertical rectangular gate 1.5 m wide sits in the wall of a tank of water, with its top edge 1.5 m below the surface. Find the depth ycp of the centre of pressure below the surface.
Water flows through a horizontal pipe that narrows from 150 mm to 100 mm. In the wide section the pressure is 140 kPa and the velocity is 1.5 m/s. Ignoring losses, find the pressure p2 in the narrow section.
A fountain nozzle points straight up. Just below the nozzle the supply pipe has a diameter of 50 mm and a gauge pressure of 70 kPa. The nozzle exit diameter is 25 mm, and the height difference across the nozzle is negligible. Ignoring losses and air resistance, find the height H the jet rises above the nozzle. Use g = 9.81 m/s².
A heat engine works between a hot reservoir at 600 °C and a cold reservoir at 10 °C. It takes in 4500 kJ of heat. Find the most work Wmax it could possibly produce.
TH = 600 °CTL = 10 °CQH = 4500 kJ
Wmax = kJ
18.Heat engines & refrigeratorsHard
A Carnot heat engine receives 130 kW of heat from a source at 600 °C and rejects heat to the surroundings at 25 °C. All of its work drives a Carnot refrigerator that removes heat from a freezer at 0 °C and also rejects heat to the surroundings at 25 °C. Find the rate Q̇L at which heat is removed from the freezer.
TH = 600 °CT0 = 25 °CTL = 0 °CQ̇H = 130 kW
Q̇L = kW
19.Waves, sound & opticsMedium
Light inside a transparent block is totally reflected at the boundary with air (n = 1.00) for every angle of incidence above 38°. Find the refractive index n1 of the block.
θc = 38°n2 = 1.00
n1 =
20.Waves, sound & opticsHard
Light of wavelength 480 nm falls on two slits 0.2 mm apart. The screen is 1 m away. Find the distance y1 from the central bright fringe to bright fringe number 1.
λ = 480 nmd = 0.2 mmL = 1 mm = 1
y1 = mm
3Solutions
1.Kinematics
Answer: d = 13.14 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v₀ = 36/3.6 = 10 m/s
Reaction distance
d1 = v₀·tr = 10·0.6 = 6 m
Braking distance
d2 = v₀²/(2a) = 10²/(2·7) = 7.143 m
Total
d = 6 + 7.143 = 13.14 m
Answer
d = 13.14 m
2.Kinematics
Answer: t = 17.82 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Powered phase
v₁ = 22·3 = 66 m/s
h₁ = ½·22·3² = 99 m
Free flight to the ground
Solve −h₁ = v₁·t₂ − ½·g·t₂² for the positive root.
t₂ = (66 + √(66² + 2·9.81·99))/9.81 = 14.82 s
t = 3 + 14.82 = 17.82 s
Answer
t = 17.82 s
3.Newton’s laws
Answer: μ = 0.3067
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Deceleration
a = v₀²/(2d) = 9.5²/(2·15) = 3.008 m/s²
Friction coefficient
μ·m·g = m·a → μ = a/g = 3.008/9.81 = 0.3067
Answer
μ = 0.3067
4.Newton’s laws
Answer: T = 16.35 N
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Forces along the string
m₂·g = 24.53 N
m₁·g·sin θ = 9.81 N
μ·m₁·g·cos θ = 0 N
Acceleration of the system
a = (24.53 − 9.81 − 0)/4.5 = 3.27 m/s²
Tension from the hanging mass
m2·g − T = m2·a → T = 2.5·(9.81 − 3.27) = 16.35 N
Answer
T = 16.35 N
5.Projectile motion
Answer: x = 124.9 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 40·cos 25° = 36.25 m/s
vy = v0·sin θ = 40·sin 25° = 16.9 m/s
Time in the air
Starting and landing at the same height: t = 2vy/g.
t = 2·16.9/9.81 = 3.446 s
Horizontal distance
x = vx·t = 36.25·3.446 = 124.9 m
Answer
x = 124.9 m
6.Projectile motion
Answer: x = 57.59 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 17·cos 45° = 12.02 m/s
vy = v0·sin θ = 17·sin 45° = 12.02 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 55 + 12.02·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (12.02 + √(144.5 + 1079))/9.81 = 4.791 s
Horizontal distance
x = vx·t = 12.02·4.791 = 57.59 m
Answer
x = 57.59 m
7.Work & energy
Answer: d = 95.17 m
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Speed in base units
v = 110/3.6 = 30.56 m/s
Energy balance
½mv² = μmg·d → d = v²/(2μg) = 30.56²/(2·0.5·9.81) = 95.17 m
Answer
d = 95.17 m
Doubling the speed makes the stopping distance four times longer.
8.Work & energy
Answer: x = 28.59 cm
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy left after the rough strip
The ramp is smooth, so only the strip removes energy.
mgh − μmgL = 24.53·(3 − 0.25·2) = 61.31 J
Maximum compression
½kx² = 61.31 → x = √(2·61.31/1500) = 0.2859 m = 28.59 cm
Answer
x = 28.59 cm
9.Momentum & collisions
Answer: v′2 = −6.833 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Momentum before
p = M·u = 11·24 = 264 kg·m/s
Momentum after
264 = 5·61 + 6·v′2
v′2 = (264 − 305)/6 = −6.833 m/s
Answer
v′2 = −6.833 m/s
The minus sign means the second fragment flies backwards.
10.Momentum & collisions
Answer: v = 126.2 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Rise of the block
h = L·(1 − cos θ) = 1.5·(1 − cos 25°) = 0.1405 m
Speed after impact
V = √(2·9.81·0.1405) = 1.661 m/s
Collision
v = (m + M)·V/m = 1.52·1.661/0.02 = 126.2 m/s
Answer
v = 126.2 m/s
11.Hydrostatic force
Answer: F = 66.22 kN
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 4 + 1/2 = 4.5 m
A = H·b = 1·1.5 = 1.5 m²
Resultant force
F = ρ·g·yc·A = 1000·9.81·4.5·1.5 = 66.22 kN
Answer
F = 66.22 kN
12.Hydrostatic force
Answer: ycp = 2.633 m
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 1.5 + 2/2 = 2.5 m
A = H·b = 2·1.5 = 3 m²
Resultant force
F = ρ·g·yc·A = 1000·9.81·2.5·3 = 73.58 kN
Centre of pressure
Pressure grows with depth, so the resultant acts below the centroid.
Ic = b·H³/12 = 1.5·2³/12 = 1 m⁴
ycp = yc + Ic/(yc·A) = 2.5 + 1/(2.5·3) = 2.633 m
Answer
ycp = 2.633 m
13.Continuity & Bernoulli
Answer: p2 = 135.4 kPa
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Exit velocity
β = 25/50 = 0.5
v2 = √(2p1/(ρ(1 − β⁴))) = √(2·70000/(1000·0.9375)) = 12.22 m/s
Height of the jet
Bernoulli along the jet: at the top the velocity is zero and the pressure is atmospheric again.
H = v2²/(2g) = 12.22²/(2·9.81) = 7.611 m
Answer
H = 7.611 m
15.Ideal gas law
Answer: P = 421.1 kPa
Ideal gas law: PV = nRT, with n = m/M.
Moles
n = m/M = 70/16.04 = 4.364 mol
T = 75 + 273.15 = 348.1 K
Pressure
P = nRT/V = 4.364·8.314·348.1/0.03 = 421.1 kPa
Answer
P = 421.1 kPa
16.Ideal gas law
Answer: V2 = 8.754 L
Combined gas law: for a fixed amount of ideal gas, P1V1/T1 = P2V2/T2.
Absolute temperatures
T1 = 288.1 K, T2 = 353.1 K
Combined gas law
V2 = V1·(P1/P2)·(T2/T1) = 20·(250/700)·(353.1/288.1) = 8.754 L
Answer
V2 = 8.754 L
17.Heat engines & refrigerators
Answer: Wmax = 3041 kJ
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
Absolute temperatures
TH = 600 + 273.15 = 873.1 K
TL = 10 + 273.15 = 283.1 K
Carnot efficiency
ηmax = 1 − TL/TH = 1 − 283.1/873.1 = 67.57 %
Maximum work
Wmax = ηmax·QH = 0.6757·4500 = 3041 kJ
Answer
Wmax = 3041 kJ
18.Heat engines & refrigerators
Answer: Q̇L = 935.4 kW
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
Absolute temperatures
TH = 600 + 273.15 = 873.1 K
T0 = 25 + 273.15 = 298.1 K
TL = 0 + 273.15 = 273.1 K
Engine work
η = 1 − 298.1/873.1 = 0.6585
Ẇ = 0.6585·130 = 85.61 kW
Heat removed by the refrigerator
COPR = 273.1/(298.1 − 273.1) = 10.93
Q̇L = 10.93·85.61 = 935.4 kW
Answer
Q̇L = 935.4 kW
19.Waves, sound & optics
Answer: n1 = 1.624
Geometric optics: at a boundary, n₁·sin θ₁ = n₂·sin θ₂ (Snell's law), with angles measured from the normal and n = c/v. Going into a slower medium the ray bends towards the normal. From a denser medium (n₁ > n₂) beyond the critical angle θc = arcsin(n₂/n₁) all light is reflected: total internal reflection. Thin lenses and spherical mirrors obey 1/f = 1/do + 1/di with the magnification m = −di/do. Sign convention: f > 0 for a converging lens and a concave mirror (f = R/2), f < 0 for a diverging lens and a convex mirror; di > 0 for a real image, di < 0 for a virtual one, and m < 0 for an inverted image.
Refractive index of the block
n₁ = n₂/sin θc = 1.00/0.6157 = 1.624
Answer
n1 = 1.624
20.Waves, sound & optics
Answer: y1 = 2.4 mm
Interference and diffraction: light from two slits a distance d apart reaches a point on the screen with a path difference d·sin θ. Bright fringes appear where d·sin θ = mλ (m = 0, ±1, ±2, …). For a screen at distance L ≫ d, the m-th bright fringe is at y = mλL/d and the fringe spacing is Δy = λL/d. A grating with N lines per millimetre has d = 1/N and sharp maxima at d·sin θ = mλ; since sin θ ≤ 1, the highest order is the largest whole number m ≤ d/λ. A single slit of width a has dark fringes at a·sin θ = mλ, m = ±1, ±2, …