Introductory Statistics: cram pack

Formula sheets, the key method steps for every topic and 12 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Descriptive statistics

Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ

Probability

Complement
P(not A) = 1 − P(A)
Addition rule
P(A ∪ B) = P(A) + P(B) − P(A ∩ B)
Independent events
P(A ∩ B) = P(A)·P(B)
Conditional probability
P(A|B) = P(A ∩ B)/P(B)
Binomial
P(X = k) = C(n,k)·pk(1 − p)n−k

Normal distribution

z-score
z = (x − μ)/σ
Below x
P(X < x) = Φ(z)
Above x
P(X > x) = 1 − Φ(z)
Between
Φ(z2) − Φ(z1)
Percentile
x = μ + z·σ

Method

  1. Convert the value to a z-score: z = (x − μ)/σ.
  2. Look up Φ(z), the area to the left of z.
  3. For the area to the right use 1 − Φ(z); for an interval subtract the two left areas.
  4. For a percentile, work backwards: find z for the area, then x = μ + z·σ.

Confidence intervals

σ known
x̄ ± z·σ/√n
σ unknown
x̄ ± t·s/√n, df = n − 1
Critical z
90%: 1.645, 95%: 1.96, 99%: 2.576
Sample size
n = (z·σ/E)², rounded up

Method

  1. Decide between z (population σ known) and t (only the sample s, with n − 1 degrees of freedom).
  2. Find the critical value for the confidence level.
  3. Margin of error: E = critical value × standard deviation/√n.
  4. Interval: x̄ ± E.

Hypothesis tests & confidence intervals

z-test for a mean
z = (x̄ − μ0)/(σ/√n)
t-test for a mean
t = (x̄ − μ0)/(s/√n), df = n − 1
Two-sided at 5%
reject H0 if |z| > 1.96
Confidence interval
x̄ ± z·σ/√n

Method

  1. State H₀ and H₁ and decide whether the test is one- or two-sided.
  2. Calculate the test statistic: (x̄ − μ₀)/(σ/√n), or with s and t.
  3. Compare with the critical value, or find the p-value.
  4. Reject H₀ if the statistic is beyond the critical value (p below α), and state the conclusion in words.

Linear regression & correlation

Sums of squares
Sxx = Σ(x − x̄)² = Σx² − (Σx)²/n, Sxy = Σxy − ΣxΣy/n
Slope
b = Sxy/Sxx
Intercept
a = ȳ − b·x̄
Correlation
r = Sxy/√(SxxSyy)
Residual
e = y − ŷ

2Practice problems

1.Descriptive statisticsMedium
1520253035404550

Find the sample standard deviation s of the data: 40, 49, 13, 34, 32, 42, 50.

n = 7
s =
2.Descriptive statisticsHard
z −2−1012

A quantity is normally distributed with mean 100 and standard deviation 15. What proportion P of values is below 70?

μ = 100σ = 15x = 70
P =
3.ProbabilityMedium
P(at least one six) = ??1?2?3?4?5?6P(six) = 1/6 on each roll

A fair die is rolled 6 times. What is the probability P of getting at least one six?

n = 6
P =
4.ProbabilityHard
n = 9, p = 0.4: P(X = 4) = ?k0123456789

A test has 9 multiple-choice questions. A student who guesses gets each one right with probability 0.4, independently. What is the probability P of exactly 4 correct answers?

n = 9p = 0.4k = 4
P =
5.Normal distributionMedium
750 g742.1 gX + Y?

X is normal with mean 250 g and standard deviation 4 g; Y is independent and normal with mean 500 g and standard deviation 9 g. Find the probability P that X + Y is more than 742.1 g. Round z to two decimals.

μX = 250, σX = 4μY = 500, σY = 9X + Y > 742.1 g
P =
6.Normal distributionHard
157164171178185192199cmbottom 85%

The heights of adult men are normally distributed with mean 178 cm and standard deviation 7 cm. Drag the cut-off so the shaded bottom 85% is to the left of it. Find the cut-off x.

μ = 178 cmσ = 7 cm85%
x = cm
7.Confidence intervalsMedium
μ₁ − μ₂0LUx̄₁ − x̄₂E = ?90%

The battery life of two phone models is compared. Model 1: 40 phones, mean 144 h, known standard deviation 20 h. Model 2: 40 phones, mean 150.5 h, known standard deviation 4 h. Find the margin of error E of the 90% confidence interval for μ₁ − μ₂.

n₁ = 40x̄₁ = 144 hσ₁ = 20 hn₂ = 40x̄₂ = 150.5 hσ₂ = 4 h90%
E = h
8.Confidence intervalsHard
n = 11Lσ = ?s = 6.795%

The diameters of 11 machined shafts have a sample standard deviation of 6.7 µm. Assuming the diameters are normally distributed, find the upper limit σ of the 95% confidence interval for the population standard deviation. With df = 10, 2.5% of the χ² distribution lies below 3.247 and 2.5% lies above 20.483.

n = 11s = 6.7 µmχ² = 3.247, 20.483
σ = µm
9.Hypothesis tests & confidence intervalsMedium
t −2.06402.064

A sample of 25 students has a mean score of 114.4 and a sample standard deviation of 20. Find the test statistic t for H₀: μ = 120.

μ₀ = 120x̄ = 114.4s = 20n = 25
t =
10.Hypothesis tests & confidence intervalsHard
μ₀x̄c

A one-sided z test of H₀: μ = 100 against H₁: μ < 100 is done at α = 0.01 with a sample of 25; the standard deviation is known to be 15. In reality the mean is 93.7. Find the power 1 − β of the test in percent.

μ₀ = 100μ = 93.7σ = 15n = 25α = 0.01
1 − β = %
11.Linear regression & correlationMedium
xy124224321420519xy24202224

The table gives 5 paired observations of x = car age in years and y = price in k€. Find the coefficient of determination r² of the least-squares line.

n = 5
r² =
12.Linear regression & correlationHard
xy143616441848205122592462xy152025405060x = 17

The table gives 6 paired observations of x = temperature in °C and y = ice creams sold. Use the least-squares line ŷ = a + b·x. A new observation (17, 43) is made. Find its residual e = y − ŷ.

n = 6(17, 43)
e =

3Solutions

1.Descriptive statistics

Answer: s = 12.63

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Mean

x̄ = 260/7 = 37.14

Squared deviations

Σ(x − x̄)² = 2.857² + 11.86² + (−24.14)² + (−3.143)² + (−5.143)² + 4.857² + 12.86² = 956.9

Standard deviation

s = √(956.9/6) = 12.63

Answer

s = 12.63
2.Descriptive statistics

Answer: P = 0.02275

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Standardise

z = −2

Standard normal table

Φ(−2) = 0.02275
P = 0.02275

Answer

P = 0.02275
3.Probability

Answer: P = 0.6651

Probability: with equally likely outcomes, P(A) = favourable/total. For independent events multiply: P(A and B) = P(A)·P(B). The complement often helps: P(at least one) = 1 − P(none). Binomial: in n independent trials with success probability p, P(X = k) = C(n, k)·pᵏ·(1 − p)ⁿ⁻ᵏ.

Complement

P(no six) = (5/6)6 = 0.3349
P = 1 − 0.3349 = 0.6651

Answer

P = 0.6651
4.Probability

Answer: P = 0.2508

Probability: with equally likely outcomes, P(A) = favourable/total. For independent events multiply: P(A and B) = P(A)·P(B). The complement often helps: P(at least one) = 1 − P(none). Binomial: in n independent trials with success probability p, P(X = k) = C(n, k)·pᵏ·(1 − p)ⁿ⁻ᵏ.

Binomial formula

P(X = 4) = 126·0.44·0.65 = 126·0.0256·0.07776 = 0.2508

Answer

P = 0.2508
5.Normal distribution

Answer: P = 0.7881

Sums and differences of normal variables: if X and Y are independent and normal, X + Y and X − Y are normal too. Means add or subtract: E(X ± Y) = μX ± μY. Variances always add, also for a difference: Var(X ± Y) = σX² + σY², so σ = √(σX² + σY²). Standard deviations never add directly. The total of n independent items with the same distribution has mean n·μ and standard deviation σ·√n. Then standardise as usual: z = (x − mean)/σ and read Φ(z).

Distribution of the sum

μ = 750 g, σ = √(4² + 9²) = 9.849 g

Standardise

z = (742.1 − 750)/9.849 = −0.8

Upper tail

P = 1 − Φ(−0.8) = 1 − 0.2119 = 0.7881

Answer

P = 0.7881
6.Normal distribution

Answer: x = 185.3 cm

From an area back to z: Φ(z) is the area to the left of z. For a left-tail area A, find z with Φ(z) = A in the table. A right-tail area A means Φ(z) = 1 − A. A central area A between −z and z leaves (1 − A)/2 in each tail, so Φ(z) = (1 + A)/2. For a value x, use x = μ + zσ.

Area to the left

Φ(z) = 0.85

z from the table

z ≈ 1.04

Back to the original units

x = 178 + 1.04·7 = 185.3 cm

Answer

x = 185.3 cm
7.Confidence intervals

Answer: E = 5.305 h

Interval for a difference: estimate ± critical value × standard error. For two independent means with known σ: SE = √(σ₁²/n₁ + σ₂²/n₂) and z. With equal unknown variances: pooled s_p and t with n₁ + n₂ − 2 degrees of freedom. For paired data, work with the differences: d̄ ± t·s_d/√n.

Point estimate

x̄₁ − x̄₂ = 144 − 150.5 = −6.5

Standard error

SE = √(20²/40 + 4²/40) = 3.225

Margin of error

E = 1.645·3.225 = 5.305

Answer

E = 5.305 h

The interval does not contain 0, so the means differ significantly.

8.Confidence intervals

Answer: σ = 11.76 µm

Interval for a variance: (n − 1)s²/σ² has a χ² distribution with n − 1 degrees of freedom. The 95% interval for σ² runs from (n − 1)s² divided by the upper χ² value (2.5% above it) to (n − 1)s² divided by the lower χ² value (2.5% below it); the interval for σ is the square root of both limits. It is not symmetric around s.

Sum of squares

(n − 1)s² = 10·6.7² = 448.9

Limits for σ²

448.9/20.483 = 21.92
448.9/3.247 = 138.3

Limit for σ

σ = √138.3 = 11.76 µm

Answer

σ = 11.76 µm

95% interval for σ: [4.681, 11.76] µm.

9.Hypothesis tests & confidence intervals

Answer: t = −1.4

Testing a mean: the test statistic measures how many standard errors the sample mean lies from the value claimed in H₀: z = (x̄ − μ₀)/(σ/√n) when σ is known, t = (x̄ − μ₀)/(s/√n) when it is estimated from the sample. A confidence interval is x̄ ± (critical value)·(standard error).

Standard error

SE = 20/√25 = 20/5 = 4

Test statistic

t = (114.4 − 120)/4 = −1.4

Answer

t = −1.4
t0.025; df = 24 = 2.064

|t| < 2.064, so H₀ is not rejected at the 5% level (two-sided).

10.Hypothesis tests & confidence intervals

Answer: 1 − β = 41.06 %

Power of a test: power = 1 − β is the probability of rejecting H₀ when it is false. Find the cutoff x̄c from μ₀ and z_α, then compute the probability of landing beyond x̄c using the true mean: z = (x̄c − μ)/(σ/√n).

Critical sample mean

SE = 15/√25 = 3
x̄c = 100 − 2.326·3 = 93.02

z under the true mean

z = (93.02 − 93.7)/3 = −0.226

Power

power = P(Z < −0.226) = 41.06%
1 − β = 41.06%

Answer

1 − β = 41.06%
11.Linear regression & correlation

Answer: r² = 0.9245

Least-squares regression: with x̄ and ȳ the means, Sxx = Σ(x − x̄)², Syy = Σ(y − ȳ)² and Sxy = Σ(x − x̄)(y − ȳ), the line ŷ = a + b·x has slope b = Sxy/Sxx and intercept a = ȳ − b·x̄, so it always passes through (x̄, ȳ). Pearson's correlation coefficient r = Sxy/√(Sxx·Syy) lies between −1 and 1; r² is the fraction of the variation in y explained by the line.

Means

x̄ = 15/5 = 3
ȳ = 108/5 = 21.6

Sums of squares and products

Sxx = Σ(x − x̄)² = 10
Sxy = Σ(x − x̄)(y − ȳ) = −14
Syy = Σ(y − ȳ)² = 21.2

Coefficient of determination

r² = −14²/(10·21.2) = 0.9245

Answer

r² = 0.9245

About 92.45% of the variation in y is explained by the line.

12.Linear regression & correlation

Answer: e = −1.914

Least-squares regression: with x̄ and ȳ the means, Sxx = Σ(x − x̄)², Syy = Σ(y − ȳ)² and Sxy = Σ(x − x̄)(y − ȳ), the line ŷ = a + b·x has slope b = Sxy/Sxx and intercept a = ȳ − b·x̄, so it always passes through (x̄, ȳ). Pearson's correlation coefficient r = Sxy/√(Sxx·Syy) lies between −1 and 1; r² is the fraction of the variation in y explained by the line.

Means

x̄ = 114/6 = 19
ȳ = 300/6 = 50

Sums of squares and products

Sxx = Σ(x − x̄)² = 70
Sxy = Σ(x − x̄)(y − ȳ) = 178

Regression line

b = 178/70 = 2.543
a = 50 − 2.543·19 = 1.686
ŷ = 1.686 + 2.543·x

Predicted value

ŷ = 1.686 + 2.543·17 = 44.91

Residual

e = 43 − 44.91 = −1.914

Answer

e = −1.914

The point lies below the line.

ExamProblems · examproblems.com/courses/statistics-1