Introductory Statistics: cram pack

Formula sheets, the key method steps for every topic and 12 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Descriptive statistics

Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ

Probability

Complement
P(not A) = 1 − P(A)
Addition rule
P(A ∪ B) = P(A) + P(B) − P(A ∩ B)
Independent events
P(A ∩ B) = P(A)·P(B)
Conditional probability
P(A|B) = P(A ∩ B)/P(B)
Binomial
P(X = k) = C(n,k)·pk(1 − p)n−k

Normal distribution

z-score
z = (x − μ)/σ
Below x
P(X < x) = Φ(z)
Above x
P(X > x) = 1 − Φ(z)
Between
Φ(z2) − Φ(z1)
Percentile
x = μ + z·σ

Method

  1. Convert the value to a z-score: z = (x − μ)/σ.
  2. Look up Φ(z), the area to the left of z.
  3. For the area to the right use 1 − Φ(z); for an interval subtract the two left areas.
  4. For a percentile, work backwards: find z for the area, then x = μ + z·σ.

Confidence intervals

σ known
x̄ ± z·σ/√n
σ unknown
x̄ ± t·s/√n, df = n − 1
Critical z
90%: 1.645, 95%: 1.96, 99%: 2.576
Sample size
n = (z·σ/E)², rounded up

Method

  1. Decide between z (population σ known) and t (only the sample s, with n − 1 degrees of freedom).
  2. Find the critical value for the confidence level.
  3. Margin of error: E = critical value × standard deviation/√n.
  4. Interval: x̄ ± E.

Hypothesis tests & confidence intervals

z-test for a mean
z = (x̄ − μ0)/(σ/√n)
t-test for a mean
t = (x̄ − μ0)/(s/√n), df = n − 1
Two-sided at 5%
reject H0 if |z| > 1.96
Confidence interval
x̄ ± z·σ/√n

Method

  1. State H₀ and H₁ and decide whether the test is one- or two-sided.
  2. Calculate the test statistic: (x̄ − μ₀)/(σ/√n), or with s and t.
  3. Compare with the critical value, or find the p-value.
  4. Reject H₀ if the statistic is beyond the critical value (p below α), and state the conclusion in words.

Linear regression & correlation

Sums of squares
Sxx = Σ(x − x̄)² = Σx² − (Σx)²/n, Sxy = Σxy − ΣxΣy/n
Slope
b = Sxy/Sxx
Intercept
a = ȳ − b·x̄
Correlation
r = Sxy/√(SxxSyy)
Residual
e = y − ŷ

2Practice problems

1.Descriptive statisticsMedium
253035404550

Find the sample standard deviation s of the data: 47, 48, 23, 40, 53, 33, 21.

n = 7
s =
2.Descriptive statisticsHard
z −2−1012

A quantity is normally distributed with mean 170 and standard deviation 10. What proportion P of values is above 165?

μ = 170σ = 10x = 165
P =
3.ProbabilityMedium
n = 10k = 4N = ?

In how many ways N can a committee of 4 people be chosen from a group of 10? The order does not matter.

n = 10k = 4
N =
4.ProbabilityHard
€p(x)−10.8540.1490.05

A game costs €1 to play. You win €5 with probability 0.1 and €50 with probability 0.05; otherwise you win nothing. The stake is not returned. Find the expected net gain E(G) per game.

stake = €1€5: p = 0.1€50: p = 0.05
E(G) = €
5.Normal distributionMedium
−3−2−10123zshaded area between −z and z = 0.9715

Drag z so that the shaded area between −z and z under the standard normal curve is 0.9715. Find z to two decimals.

A = 0.9715
z =
6.Normal distributionHard
0.03 mm0D − d?

Hole diameters D are normal with mean 25.03 mm and standard deviation 0.015 mm. Shaft diameters d are independent and normal with mean 25 mm and standard deviation 0.02 mm. A randomly chosen shaft fits when D − d > 0. Find the probability P that it fits. Round z to two decimals.

hole: μ = 25.03 mm, σ = 0.015 mmshaft: μ = 25 mm, σ = 0.02 mm
P =
7.Confidence intervalsMedium
n = 9, sd​ = 2.20LU = ?d̄ = 2E95%

The blood pressure of 9 patients is measured before and after a treatment. The differences d = before − after (mmHg) have mean 2 and standard deviation 2.2. Find the upper limit of the 95% confidence interval for the mean difference.

n = 9d̄ = 2sd = 2.295%t(8) = 2.306
upper limit = mmHg
8.Confidence intervalsHard
σ = 23, n = ?x̄ − Ex̄ + Ex̄E = 1.599%

The population standard deviation is 23. How large a sample n do you need so that a 99% confidence interval for the mean has a margin of error of at most 1.5?

σ = 23E = 1.599%
n =
9.Hypothesis tests & confidence intervalsMedium
−2.4472.447t = ?df = 6

7 employees take a typing test before and after a training course. For each person the difference d = after − before (words per minute) is recorded. The mean difference is 5.03 and the standard deviation of the differences is 9.5. Find the paired test statistic t for H₀: μd = 0.

n = 7d̄ = 5.03sd = 9.5
t =
10.Hypothesis tests & confidence intervalsHard
μ₀x̄c

A one-sided z test of H₀: μ = 500 against H₁: μ > 500 is done at α = 0.01 with a sample of 25; the standard deviation is known to be 12.5. In reality the mean is 504.25. Find the power 1 − β of the test in percent.

μ₀ = 500μ = 504.25σ = 12.5n = 25α = 0.01
1 − β = %
11.Linear regression & correlationMedium
xy1582179119102211192311825132xy15202580100120

The table gives 6 paired observations of x = temperature in °C and y = ice creams sold. Find the coefficient of determination r² of the least-squares line.

n = 6
r² =
12.Linear regression & correlationHard
xy241349442546655752xy24640455055ŷ = 50

The table gives 6 paired observations of x = hours studied and y = exam score. Use the least-squares line ŷ = a + b·x. For which value x does the line predict ŷ = 50?

n = 6ŷ = 50
x =

3Solutions

1.Descriptive statistics

Answer: s = 12.58

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Mean

x̄ = 265/7 = 37.86

Squared deviations

Σ(x − x̄)² = 9.143² + 10.14² + (−14.86)² + 2.143² + 15.14² + (−4.857)² + (−16.86)² = 948.9

Standard deviation

s = √(948.9/6) = 12.58

Answer

s = 12.58
2.Descriptive statistics

Answer: P = 0.6915

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Standardise

z = −0.5

Standard normal table

Φ(−0.5) = 0.3085
P = 1 − 0.3085 = 0.6915

Answer

P = 0.6915
3.Probability

Answer: N = 210

Probability: with equally likely outcomes, P(A) = favourable/total. For independent events multiply: P(A and B) = P(A)·P(B). The complement often helps: P(at least one) = 1 − P(none). Binomial: in n independent trials with success probability p, P(X = k) = C(n, k)·pᵏ·(1 − p)ⁿ⁻ᵏ.

Combinations

C(10, 4) = (10·9·8·7)/(4·3·2·1) = 210

Answer

N = 210
4.Probability

Answer: E(G) = 2 €

Discrete random variables: a probability distribution lists every value x a variable can take with its probability p(x); the probabilities are between 0 and 1 and add up to 1. The expected value (mean) is E(X) = Σx·p(x), the long-run average. The variance is Var(X) = Σ(x − μ)²·p(x) = E(X²) − μ², and the standard deviation σ = √Var(X). For a linear change Y = aX + b: E(Y) = a·E(X) + b, Var(Y) = a²·Var(X) and σY = |a|·σX; adding a constant does not change the spread.

Net outcomes

G: 4 (p = 0.1), 49 (p = 0.05), −1 (p = 0.85)

Expected value

E(G) = 4·0.1 + 49·0.05 − 1·0.85 = 2 €

Answer

E(G) = 2 €

A positive value means you win money on average.

5.Normal distribution

Answer: z = 2.19

From an area back to z: Φ(z) is the area to the left of z. For a left-tail area A, find z with Φ(z) = A in the table. A right-tail area A means Φ(z) = 1 − A. A central area A between −z and z leaves (1 − A)/2 in each tail, so Φ(z) = (1 + A)/2. For a value x, use x = μ + zσ.

Area to the left of z

Φ(z) = (1 + 0.9715)/2 = 0.9857

Read the z-table backwards

Find 0.9857 inside the table and read off z.

z = 2.19

Answer

z = 2.19
6.Normal distribution

Answer: P = 0.8849

Sums and differences of normal variables: if X and Y are independent and normal, X + Y and X − Y are normal too. Means add or subtract: E(X ± Y) = μX ± μY. Variances always add, also for a difference: Var(X ± Y) = σX² + σY², so σ = √(σX² + σY²). Standard deviations never add directly. The total of n independent items with the same distribution has mean n·μ and standard deviation σ·√n. Then standardise as usual: z = (x − mean)/σ and read Φ(z).

Distribution of the difference

μ = 25.03 − 25 = 0.03 mm, σ = 0.025 mm

Standardise

z = (0 − 0.03)/0.025 = −1.2

Probability

P = 1 − Φ(−1.2) = 0.8849

Answer

P = 0.8849
7.Confidence intervals

Answer: upper limit = 3.691 mmHg

Interval for a difference: estimate ± critical value × standard error. For two independent means with known σ: SE = √(σ₁²/n₁ + σ₂²/n₂) and z. With equal unknown variances: pooled s_p and t with n₁ + n₂ − 2 degrees of freedom. For paired data, work with the differences: d̄ ± t·s_d/√n.

Critical value

df = 8, t = 2.306

Margin of error

E = 2.306·2.2/√9 = 1.691

Interval

2 ± 1.691 → [0.3089, 3.691]

Answer

upper limit = 3.691 mmHg
8.Confidence intervals

Answer: n = 1561

Confidence interval for a mean: x̄ ± margin of error. With a known population σ the margin is z·σ/√n; with only the sample standard deviation s, use t with n − 1 degrees of freedom: t·s/√n. Critical values: z = 1.645 (90%), 1.96 (95%), 2.576 (99%). To get a margin E or smaller, you need n ≥ (z·σ/E)², rounded up.

Solve for n

n = (2.576·23/1.5)² = 1560

Round up

A sample size is a whole number, and rounding down would make the margin too large.

n = 1561

Answer

n = 1561
9.Hypothesis tests & confidence intervals

Answer: t = 1.401

Testing a mean: the test statistic measures how many standard errors the sample mean lies from the value claimed in H₀: z = (x̄ − μ₀)/(σ/√n) when σ is known, t = (x̄ − μ₀)/(s/√n) when it is estimated from the sample. A confidence interval is x̄ ± (critical value)·(standard error).

Standard error of the mean difference

SE = 9.5/√7 = 3.591

Test statistic

t = 5.03/3.591 = 1.401

Answer

t = 1.401

With df = 6, the two-sided 5% critical value is 2.447; |t| is smaller, so H₀ is not rejected.

10.Hypothesis tests & confidence intervals

Answer: 1 − β = 26.57 %

Power of a test: power = 1 − β is the probability of rejecting H₀ when it is false. Find the cutoff x̄c from μ₀ and z_α, then compute the probability of landing beyond x̄c using the true mean: z = (x̄c − μ)/(σ/√n).

Critical sample mean

SE = 12.5/√25 = 2.5
x̄c = 500 + 2.326·2.5 = 505.8

z under the true mean

z = (505.8 − 504.25)/2.5 = 0.626

Power

power = P(Z > 0.626) = 26.57%
1 − β = 26.57%

Answer

1 − β = 26.57%
11.Linear regression & correlation

Answer: r² = 0.9636

Least-squares regression: with x̄ and ȳ the means, Sxx = Σ(x − x̄)², Syy = Σ(y − ȳ)² and Sxy = Σ(x − x̄)(y − ȳ), the line ŷ = a + b·x has slope b = Sxy/Sxx and intercept a = ȳ − b·x̄, so it always passes through (x̄, ȳ). Pearson's correlation coefficient r = Sxy/√(Sxx·Syy) lies between −1 and 1; r² is the fraction of the variation in y explained by the line.

Means

x̄ = 120/6 = 20
ȳ = 644/6 = 107.3

Sums of squares and products

Sxx = Σ(x − x̄)² = 70
Sxy = Σ(x − x̄)(y − ȳ) = 348
Syy = Σ(y − ȳ)² = 1795

Coefficient of determination

r² = 348²/(70·1795) = 0.9636

Answer

r² = 0.9636

About 96.36% of the variation in y is explained by the line.

12.Linear regression & correlation

Answer: x = 5.636

Least-squares regression: with x̄ and ȳ the means, Sxx = Σ(x − x̄)², Syy = Σ(y − ȳ)² and Sxy = Σ(x − x̄)(y − ȳ), the line ŷ = a + b·x has slope b = Sxy/Sxx and intercept a = ȳ − b·x̄, so it always passes through (x̄, ȳ). Pearson's correlation coefficient r = Sxy/√(Sxx·Syy) lies between −1 and 1; r² is the fraction of the variation in y explained by the line.

Means

x̄ = 27/6 = 4.5
ȳ = 285/6 = 47.5

Sums of squares and products

Sxx = Σ(x − x̄)² = 17.5
Sxy = Σ(x − x̄)(y − ȳ) = 38.5

Regression line

b = 38.5/17.5 = 2.2
a = 47.5 − 2.2·4.5 = 37.6
ŷ = 37.6 + 2.2·x

Solve for x

x = (50 − 37.6)/2.2 = 5.636

Answer

x = 5.636

ExamProblems · examproblems.com/courses/statistics-1