Descriptive statistics
- Mean
- x̄ = Σx/n
- Sample standard deviation
- s = √(Σ(x − x̄)²/(n − 1))
- Median
- middle value of the sorted data
- z-score
- z = (x − μ)/σ
- Normal distribution
- 68% within ±1σ, 95% within ±2σ
Formula sheets, the key method steps for every topic and 12 practice problems, with full solutions at the back.
Find the sample standard deviation s of the data: 58, 46, 56, 58, 23, 45.
A quantity is normally distributed with mean 500 and standard deviation 60. What proportion P of values is above 440?
A bag holds 8 red and 4 blue balls. You draw two balls without putting the first one back. What is the probability P that both are red?
8 components are tested, and each one fails with probability 0.4, independently. What is the probability P that at most one fails?
Drag z so that the shaded area between −z and z under the standard normal curve is 0.8812. Find z to two decimals.
The mass X of a product from line 1 and Y from line 2 are independent and normal: X has mean 500 g and standard deviation 8 g, Y has mean 490 g and standard deviation 6 g. Find the probability P that X is greater than Y. Round z to two decimals.
The battery life of two phone models is compared. Model 1: 60 phones, mean 107 h, known standard deviation 8 h. Model 2: 100 phones, mean 92.5 h, known standard deviation 10 h. Find the margin of error E of the 99% confidence interval for μ₁ − μ₂.
The diameters of 16 machined shafts have a sample standard deviation of 5.3 µm. Assuming the diameters are normally distributed, find the upper limit σ of the 95% confidence interval for the population standard deviation. With df = 15, 2.5% of the χ² distribution lies below 6.262 and 2.5% lies above 27.488.
Two production lines make the same part. Line 1: a sample of 50 parts has mean length 41.5 mm, and the line's known standard deviation is 9 mm. Line 2: a sample of 50 parts has mean 40.6 mm, known standard deviation 5 mm. Find the test statistic z for H₀: μ₁ = μ₂, taking the difference as x̄₁ − x̄₂ (line 1 minus line 2).
A sample of 16 measurements has mean 46.6. The population standard deviation is 5. Find the lower limit L of the 99% confidence interval for the mean.
The table gives 5 paired observations of x = advertising spend in k€ and y = sales in k€. Their sums are given. Find Pearson's correlation coefficient r from these sums.
The table gives 5 paired observations of x = hours studied and y = exam score. Use the least-squares line ŷ = a + b·x. For which value x does the line predict ŷ = 54?
Answer: s = 13.43
Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.
Answer: P = 0.8413
Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.
Answer: P = 0.4242
Probability: with equally likely outcomes, P(A) = favourable/total. For independent events multiply: P(A and B) = P(A)·P(B). The complement often helps: P(at least one) = 1 − P(none). Binomial: in n independent trials with success probability p, P(X = k) = C(n, k)·pᵏ·(1 − p)ⁿ⁻ᵏ.
Answer: P = 0.1064
Probability: with equally likely outcomes, P(A) = favourable/total. For independent events multiply: P(A and B) = P(A)·P(B). The complement often helps: P(at least one) = 1 − P(none). Binomial: in n independent trials with success probability p, P(X = k) = C(n, k)·pᵏ·(1 − p)ⁿ⁻ᵏ.
Answer: z = 1.56
From an area back to z: Φ(z) is the area to the left of z. For a left-tail area A, find z with Φ(z) = A in the table. A right-tail area A means Φ(z) = 1 − A. A central area A between −z and z leaves (1 − A)/2 in each tail, so Φ(z) = (1 + A)/2. For a value x, use x = μ + zσ.
Find 0.9406 inside the table and read off z.
Answer: P = 0.8413
Sums and differences of normal variables: if X and Y are independent and normal, X + Y and X − Y are normal too. Means add or subtract: E(X ± Y) = μX ± μY. Variances always add, also for a difference: Var(X ± Y) = σX² + σY², so σ = √(σX² + σY²). Standard deviations never add directly. The total of n independent items with the same distribution has mean n·μ and standard deviation σ·√n. Then standardise as usual: z = (x − mean)/σ and read Φ(z).
Answer: E = 3.703 h
Interval for a difference: estimate ± critical value × standard error. For two independent means with known σ: SE = √(σ₁²/n₁ + σ₂²/n₂) and z. With equal unknown variances: pooled s_p and t with n₁ + n₂ − 2 degrees of freedom. For paired data, work with the differences: d̄ ± t·s_d/√n.
The interval does not contain 0, so the means differ significantly.
Answer: σ = 8.203 µm
Interval for a variance: (n − 1)s²/σ² has a χ² distribution with n − 1 degrees of freedom. The 95% interval for σ² runs from (n − 1)s² divided by the upper χ² value (2.5% above it) to (n − 1)s² divided by the lower χ² value (2.5% below it); the interval for σ is the square root of both limits. It is not symmetric around s.
95% interval for σ: [3.915, 8.203] µm.
Answer: z = 0.6181
Hypothesis test: the test statistic = (estimate − value under H₀)/(standard error under H₀). The p-value is the probability, assuming H₀ is true, of a statistic at least as extreme as the one observed: the area in one tail for a one-sided H₁, twice the tail area for a two-sided H₁. Reject H₀ when p ≤ α.
|z| < 1.96, so H₀ is not rejected at the 5% level (two-sided).
Answer: L = 43.38
Testing a mean: the test statistic measures how many standard errors the sample mean lies from the value claimed in H₀: z = (x̄ − μ₀)/(σ/√n) when σ is known, t = (x̄ − μ₀)/(s/√n) when it is estimated from the sample. A confidence interval is x̄ ± (critical value)·(standard error).
Answer: r = 0.9921
Least-squares regression: with x̄ and ȳ the means, Sxx = Σ(x − x̄)², Syy = Σ(y − ȳ)² and Sxy = Σ(x − x̄)(y − ȳ), the line ŷ = a + b·x has slope b = Sxy/Sxx and intercept a = ȳ − b·x̄, so it always passes through (x̄, ȳ). Pearson's correlation coefficient r = Sxy/√(Sxx·Syy) lies between −1 and 1; r² is the fraction of the variation in y explained by the line.
Answer: x = 3.532
Least-squares regression: with x̄ and ȳ the means, Sxx = Σ(x − x̄)², Syy = Σ(y − ȳ)² and Sxy = Σ(x − x̄)(y − ȳ), the line ŷ = a + b·x has slope b = Sxy/Sxx and intercept a = ȳ − b·x̄, so it always passes through (x̄, ȳ). Pearson's correlation coefficient r = Sxy/√(Sxx·Syy) lies between −1 and 1; r² is the fraction of the variation in y explained by the line.
ExamProblems · examproblems.com/courses/statistics-1