Descriptive statistics
- Mean
- x̄ = Σx/n
- Sample standard deviation
- s = √(Σ(x − x̄)²/(n − 1))
- Median
- middle value of the sorted data
- z-score
- z = (x − μ)/σ
- Normal distribution
- 68% within ±1σ, 95% within ±2σ
Formula sheets, the key method steps for every topic and 12 practice problems, with full solutions at the back.
Find the sample standard deviation s of the data: 29, 15, 38, 14, 33, 26, 36.
A quantity is normally distributed with mean 50 and standard deviation 15. What proportion P of values is below 68.75?
A fair die is rolled 7 times. What is the probability P of getting at least one six?
A game costs €2 to play. You win €6 with probability 0.2 and €20 with probability 0.02; otherwise you win nothing. The stake is not returned. Find the expected net gain E(G) per game.
The heights of adult men are normally distributed with mean 178 cm and standard deviation 7 cm. What fraction lies between 178.35 and 188.85 cm? Give P as a decimal.
Hole diameters D are normal with mean 25.02 mm and standard deviation 0.01 mm. Shaft diameters d are independent and normal with mean 25 mm and standard deviation 0.02 mm. A randomly chosen shaft fits when D − d > 0. Find the probability P that it fits. Round z to two decimals.
A sample of 12 items has mean 60 and standard deviation s = 3.5. The population is roughly normal. Find the lower limit of the 95% confidence interval for the mean.
The diameters of 20 machined shafts have a sample standard deviation of 3.8 µm. Assuming the diameters are normally distributed, find the upper limit σ of the 95% confidence interval for the population standard deviation. With df = 19, 2.5% of the χ² distribution lies below 8.907 and 2.5% lies above 32.852.
Two teaching methods are compared. Group 1: 9 students, mean score 101, standard deviation 8.5. Group 2: 12 students, mean score 114.2, standard deviation 9. Assume equal population variances and use the pooled two-sample t test. Find the test statistic t for H₀: μ₁ = μ₂, taking the difference as x̄₁ − x̄₂ (group 1 minus group 2).
A sample of 81 measurements has mean 97.4. The population standard deviation is 8. Find the upper limit U of the 99% confidence interval for the mean.
The table gives 5 paired observations of x = temperature in °C and y = ice creams sold. Find Pearson's correlation coefficient r.
The table gives 5 paired observations of x = load in kN and y = extension in mm. Use the least-squares line ŷ = a + b·x. A new observation (7, 27) is made. Find its residual e = y − ŷ.
Answer: s = 9.621
Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.
Answer: P = 0.8944
Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.
Answer: P = 0.7209
Probability: with equally likely outcomes, P(A) = favourable/total. For independent events multiply: P(A and B) = P(A)·P(B). The complement often helps: P(at least one) = 1 − P(none). Binomial: in n independent trials with success probability p, P(X = k) = C(n, k)·pᵏ·(1 − p)ⁿ⁻ᵏ.
Answer: E(G) = −0.4 €
Discrete random variables: a probability distribution lists every value x a variable can take with its probability p(x); the probabilities are between 0 and 1 and add up to 1. The expected value (mean) is E(X) = Σx·p(x), the long-run average. The variance is Var(X) = Σ(x − μ)²·p(x) = E(X²) − μ², and the standard deviation σ = √Var(X). For a linear change Y = aX + b: E(Y) = a·E(X) + b, Var(Y) = a²·Var(X) and σY = |a|·σX; adding a constant does not change the spread.
A negative value means you lose money on average.
Answer: P = 0.4195
Normal distribution: convert a value x to a z-score, z = (x − μ)/σ, which counts standard deviations from the mean. A z-table (or Φ(z)) gives the area to the left of z, which is P(X < x). The area to the right is 1 − Φ(z), and the area between two values is the difference of their two areas.
Answer: P = 0.8133
Sums and differences of normal variables: if X and Y are independent and normal, X + Y and X − Y are normal too. Means add or subtract: E(X ± Y) = μX ± μY. Variances always add, also for a difference: Var(X ± Y) = σX² + σY², so σ = √(σX² + σY²). Standard deviations never add directly. The total of n independent items with the same distribution has mean n·μ and standard deviation σ·√n. Then standardise as usual: z = (x − mean)/σ and read Φ(z).
Answer: lower limit = 57.78
Confidence interval for a mean: x̄ ± margin of error. With a known population σ the margin is z·σ/√n; with only the sample standard deviation s, use t with n − 1 degrees of freedom: t·s/√n. Critical values: z = 1.645 (90%), 1.96 (95%), 2.576 (99%). To get a margin E or smaller, you need n ≥ (z·σ/E)², rounded up.
Answer: σ = 5.55 µm
Interval for a variance: (n − 1)s²/σ² has a χ² distribution with n − 1 degrees of freedom. The 95% interval for σ² runs from (n − 1)s² divided by the upper χ² value (2.5% above it) to (n − 1)s² divided by the lower χ² value (2.5% below it); the interval for σ is the square root of both limits. It is not symmetric around s.
95% interval for σ: [2.89, 5.55] µm.
Answer: t = −3.404
Hypothesis test: the test statistic = (estimate − value under H₀)/(standard error under H₀). The p-value is the probability, assuming H₀ is true, of a statistic at least as extreme as the one observed: the area in one tail for a one-sided H₁, twice the tail area for a two-sided H₁. Reject H₀ when p ≤ α.
With df = 19, the two-sided 5% critical value is 2.093; |t| is larger, so H₀ is rejected.
Answer: U = 99.69
Testing a mean: the test statistic measures how many standard errors the sample mean lies from the value claimed in H₀: z = (x̄ − μ₀)/(σ/√n) when σ is known, t = (x̄ − μ₀)/(s/√n) when it is estimated from the sample. A confidence interval is x̄ ± (critical value)·(standard error).
Answer: r = 0.9683
Least-squares regression: with x̄ and ȳ the means, Sxx = Σ(x − x̄)², Syy = Σ(y − ȳ)² and Sxy = Σ(x − x̄)(y − ȳ), the line ŷ = a + b·x has slope b = Sxy/Sxx and intercept a = ȳ − b·x̄, so it always passes through (x̄, ȳ). Pearson's correlation coefficient r = Sxy/√(Sxx·Syy) lies between −1 and 1; r² is the fraction of the variation in y explained by the line.
Answer: e = −1.9
Least-squares regression: with x̄ and ȳ the means, Sxx = Σ(x − x̄)², Syy = Σ(y − ȳ)² and Sxy = Σ(x − x̄)(y − ȳ), the line ŷ = a + b·x has slope b = Sxy/Sxx and intercept a = ȳ − b·x̄, so it always passes through (x̄, ȳ). Pearson's correlation coefficient r = Sxy/√(Sxx·Syy) lies between −1 and 1; r² is the fraction of the variation in y explained by the line.
The point lies below the line.
ExamProblems · examproblems.com/courses/statistics-1