Introductory Statistics: cram pack

Formula sheets, the key method steps for every topic and 12 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Descriptive statistics

Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ

Probability

Complement
P(not A) = 1 − P(A)
Addition rule
P(A ∪ B) = P(A) + P(B) − P(A ∩ B)
Independent events
P(A ∩ B) = P(A)·P(B)
Conditional probability
P(A|B) = P(A ∩ B)/P(B)
Binomial
P(X = k) = C(n,k)·pk(1 − p)n−k

Normal distribution

z-score
z = (x − μ)/σ
Below x
P(X < x) = Φ(z)
Above x
P(X > x) = 1 − Φ(z)
Between
Φ(z2) − Φ(z1)
Percentile
x = μ + z·σ

Method

  1. Convert the value to a z-score: z = (x − μ)/σ.
  2. Look up Φ(z), the area to the left of z.
  3. For the area to the right use 1 − Φ(z); for an interval subtract the two left areas.
  4. For a percentile, work backwards: find z for the area, then x = μ + z·σ.

Confidence intervals

σ known
x̄ ± z·σ/√n
σ unknown
x̄ ± t·s/√n, df = n − 1
Critical z
90%: 1.645, 95%: 1.96, 99%: 2.576
Sample size
n = (z·σ/E)², rounded up

Method

  1. Decide between z (population σ known) and t (only the sample s, with n − 1 degrees of freedom).
  2. Find the critical value for the confidence level.
  3. Margin of error: E = critical value × standard deviation/√n.
  4. Interval: x̄ ± E.

Hypothesis tests & confidence intervals

z-test for a mean
z = (x̄ − μ0)/(σ/√n)
t-test for a mean
t = (x̄ − μ0)/(s/√n), df = n − 1
Two-sided at 5%
reject H0 if |z| > 1.96
Confidence interval
x̄ ± z·σ/√n

Method

  1. State H₀ and H₁ and decide whether the test is one- or two-sided.
  2. Calculate the test statistic: (x̄ − μ₀)/(σ/√n), or with s and t.
  3. Compare with the critical value, or find the p-value.
  4. Reject H₀ if the statistic is beyond the critical value (p below α), and state the conclusion in words.

Linear regression & correlation

Sums of squares
Sxx = Σ(x − x̄)² = Σx² − (Σx)²/n, Sxy = Σxy − ΣxΣy/n
Slope
b = Sxy/Sxx
Intercept
a = ȳ − b·x̄
Correlation
r = Sxy/√(SxxSyy)
Residual
e = y − ŷ

2Practice problems

1.Descriptive statisticsMedium
3540455055

Find the sample standard deviation s of the data: 41, 43, 58, 31, 43, 43.

n = 6
s =
2.Descriptive statisticsHard
z −2−1012

A quantity is normally distributed with mean 100 and standard deviation 5. What proportion P of values is below 94?

μ = 100σ = 5x = 94
P =
3.ProbabilityMedium
red: 6blue: 5

A bag holds 6 red and 5 blue balls. You draw two balls without putting the first one back. What is the probability P that both are red?

6 / 5
P =
4.ProbabilityHard
n = 5, p = 0.2: P(X ≤ 1) = ?k012345

5 components are tested, and each one fails with probability 0.2, independently. What is the probability P that at most one fails?

n = 5p = 0.2
P =
5.Normal distributionMedium
200 mm199.3 mmX + Y?

X is normal with mean 120 mm and standard deviation 0.3 mm; Y is independent and normal with mean 80 mm and standard deviation 0.4 mm. Find the probability P that X + Y is more than 199.3 mm. Round z to two decimals.

μX = 120, σX = 0.3μY = 80, σY = 0.4X + Y > 199.3 mm
P =
6.Normal distributionHard
380420460500540580620htop 20%

The battery lifetimes are normally distributed with mean 500 h and standard deviation 40 h. Drag the cut-off so the shaded top 20% is to the right of it. Find the cut-off x.

μ = 500 hσ = 40 h20%
x = h
7.Confidence intervalsMedium
x̄E₁ = 10.799%, n = 64x̄E₂ = ?90%, n = 16

A 99% confidence interval for a mean, based on 64 observations and a known σ, has a margin of error of 10.7. What is the margin of error E₂ of a 90% interval based on 16 observations?

99%n₁ = 64E₁ = 10.790%n₂ = 16
E₂ =
8.Confidence intervalsHard
σ = 34, n = ?x̄ − Ex̄ + Ex̄E = 590%

The population standard deviation is 34. How large a sample n do you need so that a 90% confidence interval for the mean has a margin of error of at most 5?

σ = 34E = 590%
n =
9.Hypothesis tests & confidence intervalsMedium
−2.0452.045t = ?df = 29

Two teaching methods are compared. Group 1: 20 students, mean score 20, standard deviation 10. Group 2: 11 students, mean score 25.6, standard deviation 12. Assume equal population variances and use the pooled two-sample t test. Find the test statistic t for H₀: μ₁ = μ₂, taking the difference as x̄₁ − x̄₂ (group 1 minus group 2).

n₁ = 20x̄₁ = 20s₁ = 10n₂ = 11x̄₂ = 25.6s₂ = 12
t =
10.Hypothesis tests & confidence intervalsHard
μ₀x̄c

A one-sided z test of H₀: μ = 500 against H₁: μ > 500 is done at α = 0.10 with a sample of 36; the standard deviation is known to be 6. In reality the mean is 503.1. Find the power 1 − β of the test in percent.

μ₀ = 500μ = 503.1σ = 6n = 36α = 0.10
1 − β = %
11.Linear regression & correlationMedium
xy145243351461565672xy246506070

The table gives 6 paired observations of x = hours studied and y = exam score. Find the coefficient of determination r² of the least-squares line.

n = 6
r² =
12.Linear regression & correlationHard
xy2534596768971010912125xy51050100x = 9

The table gives 6 paired observations of x = hours studied and y = exam score. Use the least-squares line ŷ = a + b·x. Predict ŷ for x = 9.

n = 6x = 9
ŷ =

3Solutions

1.Descriptive statistics

Answer: s = 8.635

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Mean

x̄ = 259/6 = 43.17

Squared deviations

Σ(x − x̄)² = (−2.167)² + (−0.1667)² + 14.83² + (−12.17)² + (−0.1667)² + (−0.1667)² = 372.8

Standard deviation

s = √(372.8/5) = 8.635

Answer

s = 8.635
2.Descriptive statistics

Answer: P = 0.1151

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Standardise

z = −1.2

Standard normal table

Φ(−1.2) = 0.1151
P = 0.1151

Answer

P = 0.1151
3.Probability

Answer: P = 0.2727

Probability: with equally likely outcomes, P(A) = favourable/total. For independent events multiply: P(A and B) = P(A)·P(B). The complement often helps: P(at least one) = 1 − P(none). Binomial: in n independent trials with success probability p, P(X = k) = C(n, k)·pᵏ·(1 − p)ⁿ⁻ᵏ.

First and second draw

P = 6/11 · 5/10 = 30/110 = 0.2727

Answer

P = 0.2727
4.Probability

Answer: P = 0.7373

Probability: with equally likely outcomes, P(A) = favourable/total. For independent events multiply: P(A and B) = P(A)·P(B). The complement often helps: P(at least one) = 1 − P(none). Binomial: in n independent trials with success probability p, P(X = k) = C(n, k)·pᵏ·(1 − p)ⁿ⁻ᵏ.

Zero and one failure

P(X = 0) = 0.85 = 0.3277
P(X = 1) = 5·0.2·0.84 = 0.4096

Add them

P = 0.3277 + 0.4096 = 0.7373

Answer

P = 0.7373
5.Normal distribution

Answer: P = 0.9192

Sums and differences of normal variables: if X and Y are independent and normal, X + Y and X − Y are normal too. Means add or subtract: E(X ± Y) = μX ± μY. Variances always add, also for a difference: Var(X ± Y) = σX² + σY², so σ = √(σX² + σY²). Standard deviations never add directly. The total of n independent items with the same distribution has mean n·μ and standard deviation σ·√n. Then standardise as usual: z = (x − mean)/σ and read Φ(z).

Distribution of the sum

μ = 200 mm, σ = √(0.3² + 0.4²) = 0.5 mm

Standardise

z = (199.3 − 200)/0.5 = −1.4

Upper tail

P = 1 − Φ(−1.4) = 1 − 0.08076 = 0.9192

Answer

P = 0.9192
6.Normal distribution

Answer: x = 534 h

From an area back to z: Φ(z) is the area to the left of z. For a left-tail area A, find z with Φ(z) = A in the table. A right-tail area A means Φ(z) = 1 − A. A central area A between −z and z leaves (1 − A)/2 in each tail, so Φ(z) = (1 + A)/2. For a value x, use x = μ + zσ.

Area to the left

Φ(z) = 0.8

z from the table

z ≈ 0.84

Back to the original units

x = 500 + 0.84·40 = 534 h

Answer

x = 534 h
7.Confidence intervals

Answer: E₂ = 13.67

Confidence interval for a mean: x̄ ± margin of error. With a known population σ the margin is z·σ/√n; with only the sample standard deviation s, use t with n − 1 degrees of freedom: t·s/√n. Critical values: z = 1.645 (90%), 1.96 (95%), 2.576 (99%). To get a margin E or smaller, you need n ≥ (z·σ/E)², rounded up.

Ratio of margins

E₂/E₁ = (1.645/2.576)·√(64/16) = 1.277

New margin

E₂ = 10.7·1.277 = 13.67

Answer

E₂ = 13.67
8.Confidence intervals

Answer: n = 126

Confidence interval for a mean: x̄ ± margin of error. With a known population σ the margin is z·σ/√n; with only the sample standard deviation s, use t with n − 1 degrees of freedom: t·s/√n. Critical values: z = 1.645 (90%), 1.96 (95%), 2.576 (99%). To get a margin E or smaller, you need n ≥ (z·σ/E)², rounded up.

Solve for n

n = (1.645·34/5)² = 125.1

Round up

A sample size is a whole number, and rounding down would make the margin too large.

n = 126

Answer

n = 126
9.Hypothesis tests & confidence intervals

Answer: t = −1.39

Hypothesis test: the test statistic = (estimate − value under H₀)/(standard error under H₀). The p-value is the probability, assuming H₀ is true, of a statistic at least as extreme as the one observed: the area in one tail for a one-sided H₁, twice the tail area for a two-sided H₁. Reject H₀ when p ≤ α.

Pooled variance

sp² = (19·10² + 10·12²)/29 = 115.2
sp = 10.73

Standard error

SE = 10.73·√(1/20 + 1/11) = 4.029

Test statistic

t = (20 − 25.6)/4.029 = −1.39

Answer

t = −1.39

With df = 29, the two-sided 5% critical value is 2.045; |t| is smaller, so H₀ is not rejected.

10.Hypothesis tests & confidence intervals

Answer: 1 − β = 96.55 %

Power of a test: power = 1 − β is the probability of rejecting H₀ when it is false. Find the cutoff x̄c from μ₀ and z_α, then compute the probability of landing beyond x̄c using the true mean: z = (x̄c − μ)/(σ/√n).

Critical sample mean

SE = 6/√36 = 1
x̄c = 500 + 1.282·1 = 501.3

z under the true mean

z = (501.3 − 503.1)/1 = −1.818

Power

power = P(Z > −1.818) = 96.55%
1 − β = 96.55%

Answer

1 − β = 96.55%
11.Linear regression & correlation

Answer: r² = 0.9397

Least-squares regression: with x̄ and ȳ the means, Sxx = Σ(x − x̄)², Syy = Σ(y − ȳ)² and Sxy = Σ(x − x̄)(y − ȳ), the line ŷ = a + b·x has slope b = Sxy/Sxx and intercept a = ȳ − b·x̄, so it always passes through (x̄, ȳ). Pearson's correlation coefficient r = Sxy/√(Sxx·Syy) lies between −1 and 1; r² is the fraction of the variation in y explained by the line.

Means

x̄ = 21/6 = 3.5
ȳ = 337/6 = 56.17

Sums of squares and products

Sxx = Σ(x − x̄)² = 17.5
Sxy = Σ(x − x̄)(y − ȳ) = 105.5
Syy = Σ(y − ȳ)² = 676.8

Coefficient of determination

r² = 105.5²/(17.5·676.8) = 0.9397

Answer

r² = 0.9397

About 93.97% of the variation in y is explained by the line.

12.Linear regression & correlation

Answer: ŷ = 101.7

Least-squares regression: with x̄ and ȳ the means, Sxx = Σ(x − x̄)², Syy = Σ(y − ȳ)² and Sxy = Σ(x − x̄)(y − ȳ), the line ŷ = a + b·x has slope b = Sxy/Sxx and intercept a = ȳ − b·x̄, so it always passes through (x̄, ȳ). Pearson's correlation coefficient r = Sxy/√(Sxx·Syy) lies between −1 and 1; r² is the fraction of the variation in y explained by the line.

Means

x̄ = 42/6 = 7
ȳ = 519/6 = 86.5

Sums of squares and products

Sxx = Σ(x − x̄)² = 70
Sxy = Σ(x − x̄)(y − ȳ) = 531

Regression line

b = 531/70 = 7.586
a = 86.5 − 7.586·7 = 33.4
ŷ = 33.4 + 7.586·x

Prediction

ŷ = 33.4 + 7.586·9 = 101.7

Answer

ŷ = 101.7

ExamProblems · examproblems.com/courses/statistics-1