Formula sheets, the key method steps for every topic and 10 practice problems, with full solutions at the back.
Drag z so that the shaded area between −z and z under the standard normal curve is 0.3969. Find z to two decimals.
Hole diameters D are normal with mean 25.04 mm and standard deviation 0.02 mm. Shaft diameters d are independent and normal with mean 25 mm and standard deviation 0.01 mm. A randomly chosen shaft fits when D − d > 0. Find the probability P that it fits. Round z to two decimals.
The blood pressure of 10 patients is measured before and after a treatment. The differences d = before − after (mmHg) have mean −4.8 and standard deviation 1.9. Find the lower limit of the 90% confidence interval for the mean difference.
A pilot study suggests that about 0.8 of products are defective. How many products n must be inspected so that a 99% confidence interval for the proportion has a margin of error of at most 0.03?
The mean of a population is claimed to be 500; the population standard deviation is known to be 20. A random sample of 100 observations has a mean of 497.24. Test H₀: μ = 500 against H₁: μ < 500. Find the p-value p.
A sample of 64 measurements has mean 119.5. The population standard deviation is 4. Find the lower limit L of the 95% confidence interval for the mean.
The table gives 5 paired observations of x = car age in years and y = price in k€. Their sums are given. Find Pearson's correlation coefficient r from these sums.
The table gives 6 paired observations of x = temperature in °C and y = ice creams sold. Use the least-squares line ŷ = a + b·x. A new observation (16.5, 59) is made. Find its residual e = y − ŷ.
The contingency table shows observed counts. Compute the chi-square statistic χ² for the test of independence between the row and column variables. Do not use a continuity correction.
The table shows observed counts. Test at α = 0.01 whether the two variables are independent (no continuity correction). Compute the test statistic χ², then compare it with the critical value from the table.
Answer: z = 0.52
From an area back to z: Φ(z) is the area to the left of z. For a left-tail area A, find z with Φ(z) = A in the table. A right-tail area A means Φ(z) = 1 − A. A central area A between −z and z leaves (1 − A)/2 in each tail, so Φ(z) = (1 + A)/2. For a value x, use x = μ + zσ.
Find 0.6985 inside the table and read off z.
Answer: P = 0.9633
Sums and differences of normal variables: if X and Y are independent and normal, X + Y and X − Y are normal too. Means add or subtract: E(X ± Y) = μX ± μY. Variances always add, also for a difference: Var(X ± Y) = σX² + σY², so σ = √(σX² + σY²). Standard deviations never add directly. The total of n independent items with the same distribution has mean n·μ and standard deviation σ·√n. Then standardise as usual: z = (x − mean)/σ and read Φ(z).
Answer: lower limit = −5.901 mmHg
Interval for a difference: estimate ± critical value × standard error. For two independent means with known σ: SE = √(σ₁²/n₁ + σ₂²/n₂) and z. With equal unknown variances: pooled s_p and t with n₁ + n₂ − 2 degrees of freedom. For paired data, work with the differences: d̄ ± t·s_d/√n.
Answer: n = 1180
Confidence interval for a proportion: p̂ ± z·√(p̂(1 − p̂)/n), where p̂ = x/n. To reach a margin E you need n ≥ z²·p(1 − p)/E², rounded up; without a prior estimate use p = 0.5, which gives the largest n.
Answer: p = 0.08379
Hypothesis test: the test statistic = (estimate − value under H₀)/(standard error under H₀). The p-value is the probability, assuming H₀ is true, of a statistic at least as extreme as the one observed: the area in one tail for a one-sided H₁, twice the tail area for a two-sided H₁. Reject H₀ when p ≤ α.
p > 0.05, so H₀ is not rejected at the 5% level.
Answer: L = 118.5
Testing a mean: the test statistic measures how many standard errors the sample mean lies from the value claimed in H₀: z = (x̄ − μ₀)/(σ/√n) when σ is known, t = (x̄ − μ₀)/(s/√n) when it is estimated from the sample. A confidence interval is x̄ ± (critical value)·(standard error).
Answer: r = −0.9909
Least-squares regression: with x̄ and ȳ the means, Sxx = Σ(x − x̄)², Syy = Σ(y − ȳ)² and Sxy = Σ(x − x̄)(y − ȳ), the line ŷ = a + b·x has slope b = Sxy/Sxx and intercept a = ȳ − b·x̄, so it always passes through (x̄, ȳ). Pearson's correlation coefficient r = Sxy/√(Sxx·Syy) lies between −1 and 1; r² is the fraction of the variation in y explained by the line.
Answer: e = 3.99
Least-squares regression: with x̄ and ȳ the means, Sxx = Σ(x − x̄)², Syy = Σ(y − ȳ)² and Sxy = Σ(x − x̄)(y − ȳ), the line ŷ = a + b·x has slope b = Sxy/Sxx and intercept a = ȳ − b·x̄, so it always passes through (x̄, ȳ). Pearson's correlation coefficient r = Sxy/√(Sxx·Syy) lies between −1 and 1; r² is the fraction of the variation in y explained by the line.
The point lies above the line.
Answer: χ² = 20.17
Chi-square tests: compare observed counts O with the counts E expected under H₀ using χ² = Σ(O − E)²/E. Goodness of fit: E = n·p for each category, df = k − 1 (minus one more for each parameter estimated from the data). Independence in an r × c table: E = row total × column total / grand total, df = (r − 1)(c − 1). Reject H₀ when χ² exceeds the critical value for the chosen α.
df = 1. At α = 0.05 the critical value is 3.841, so H₀ (independence) is rejected.
Answer: χ² = 3.452
Chi-square tests: compare observed counts O with the counts E expected under H₀ using χ² = Σ(O − E)²/E. Goodness of fit: E = n·p for each category, df = k − 1 (minus one more for each parameter estimated from the data). Independence in an r × c table: E = row total × column total / grand total, df = (r − 1)(c − 1). Reject H₀ when χ² exceeds the critical value for the chosen α.
χ² is below the critical value, so H₀ is not rejected: there is no significant evidence of a relationship.
ExamProblems · examproblems.com/courses/statistics-2-inference