Formula sheets, the key method steps for every topic and 10 practice problems, with full solutions at the back.
The masses of bags of cement are independent and normal with mean 25 kg and standard deviation 0.5 kg. Find the probability P that the total mass of 6 of them exceeds 148.2 kg. Round z to two decimals.
The IQ scores are normally distributed with mean 100 points and standard deviation 15 points. Find the value x below which 10% of them lie (the 10th percentile).
A sample of 10 items has mean 73.5 and standard deviation s = 4. The population is roughly normal. Find the upper limit of the 90% confidence interval for the mean.
The population standard deviation is 26. How large a sample n do you need so that a 99% confidence interval for the mean has a margin of error of at most 2?
Two teaching methods are compared. Group 1: 20 students, mean score 25, standard deviation 8. Group 2: 6 students, mean score 20.9, standard deviation 8. Assume equal population variances and use the pooled two-sample t test. Find the test statistic t for H₀: μ₁ = μ₂, taking the difference as x̄₁ − x̄₂ (group 1 minus group 2).
A one-sided z test of H₀: μ = 100 against H₁: μ > 100 is done at α = 0.05 with a sample of 36; the standard deviation is known to be 15. In reality the mean is 107.5. Find the probability of a Type II error β in percent.
The table gives 5 paired observations of x = advertising spend in k€ and y = sales in k€. Find the coefficient of determination r² of the least-squares line.
The table gives 6 paired observations of x = car age in years and y = price in k€. Use the least-squares line ŷ = a + b·x. A new observation (4.5, 12) is made. Find its residual e = y − ŷ.
The contingency table shows observed counts. Compute the chi-square statistic χ² for the test of independence between the row and column variables. Do not use a continuity correction.
A chi-square goodness-of-fit test compares observed counts in 4 categories with fully specified expected proportions (no parameters are estimated from the data). Using the table, find the critical value χ²crit at significance level α = 0.01.
Answer: P = 0.9292
Sums and differences of normal variables: if X and Y are independent and normal, X + Y and X − Y are normal too. Means add or subtract: E(X ± Y) = μX ± μY. Variances always add, also for a difference: Var(X ± Y) = σX² + σY², so σ = √(σX² + σY²). Standard deviations never add directly. The total of n independent items with the same distribution has mean n·μ and standard deviation σ·√n. Then standardise as usual: z = (x − mean)/σ and read Φ(z).
Answer: x = 80.78 points
Normal distribution: convert a value x to a z-score, z = (x − μ)/σ, which counts standard deviations from the mean. A z-table (or Φ(z)) gives the area to the left of z, which is P(X < x). The area to the right is 1 − Φ(z), and the area between two values is the difference of their two areas.
Answer: upper limit = 75.82
Confidence interval for a mean: x̄ ± margin of error. With a known population σ the margin is z·σ/√n; with only the sample standard deviation s, use t with n − 1 degrees of freedom: t·s/√n. Critical values: z = 1.645 (90%), 1.96 (95%), 2.576 (99%). To get a margin E or smaller, you need n ≥ (z·σ/E)², rounded up.
Answer: n = 1122
Confidence interval for a mean: x̄ ± margin of error. With a known population σ the margin is z·σ/√n; with only the sample standard deviation s, use t with n − 1 degrees of freedom: t·s/√n. Critical values: z = 1.645 (90%), 1.96 (95%), 2.576 (99%). To get a margin E or smaller, you need n ≥ (z·σ/E)², rounded up.
A sample size is a whole number, and rounding down would make the margin too large.
Answer: t = 1.101
Hypothesis test: the test statistic = (estimate − value under H₀)/(standard error under H₀). The p-value is the probability, assuming H₀ is true, of a statistic at least as extreme as the one observed: the area in one tail for a one-sided H₁, twice the tail area for a two-sided H₁. Reject H₀ when p ≤ α.
With df = 24, the two-sided 5% critical value is 2.064; |t| is smaller, so H₀ is not rejected.
Answer: β = 8.771 %
Power of a test: power = 1 − β is the probability of rejecting H₀ when it is false. Find the cutoff x̄c from μ₀ and z_α, then compute the probability of landing beyond x̄c using the true mean: z = (x̄c − μ)/(σ/√n).
Answer: r² = 0.8579
Least-squares regression: with x̄ and ȳ the means, Sxx = Σ(x − x̄)², Syy = Σ(y − ȳ)² and Sxy = Σ(x − x̄)(y − ȳ), the line ŷ = a + b·x has slope b = Sxy/Sxx and intercept a = ȳ − b·x̄, so it always passes through (x̄, ȳ). Pearson's correlation coefficient r = Sxy/√(Sxx·Syy) lies between −1 and 1; r² is the fraction of the variation in y explained by the line.
About 85.79% of the variation in y is explained by the line.
Answer: e = −4.214
Least-squares regression: with x̄ and ȳ the means, Sxx = Σ(x − x̄)², Syy = Σ(y − ȳ)² and Sxy = Σ(x − x̄)(y − ȳ), the line ŷ = a + b·x has slope b = Sxy/Sxx and intercept a = ȳ − b·x̄, so it always passes through (x̄, ȳ). Pearson's correlation coefficient r = Sxy/√(Sxx·Syy) lies between −1 and 1; r² is the fraction of the variation in y explained by the line.
The point lies below the line.
Answer: χ² = 2.956
Chi-square tests: compare observed counts O with the counts E expected under H₀ using χ² = Σ(O − E)²/E. Goodness of fit: E = n·p for each category, df = k − 1 (minus one more for each parameter estimated from the data). Independence in an r × c table: E = row total × column total / grand total, df = (r − 1)(c − 1). Reject H₀ when χ² exceeds the critical value for the chosen α.
df = 2. At α = 0.05 the critical value is 5.991, so H₀ (independence) is not rejected.
Answer: χ²crit = 11.35
Chi-square tests: compare observed counts O with the counts E expected under H₀ using χ² = Σ(O − E)²/E. Goodness of fit: E = n·p for each category, df = k − 1 (minus one more for each parameter estimated from the data). Independence in an r × c table: E = row total × column total / grand total, df = (r − 1)(c − 1). Reject H₀ when χ² exceeds the critical value for the chosen α.
Reject H₀ if the computed χ² is larger than this value.
ExamProblems · examproblems.com/courses/statistics-2-inference