Formula sheets, the key method steps for every topic and 10 practice problems, with full solutions at the back.
The heights of adult men are normally distributed with mean 178 cm and standard deviation 7 cm. What fraction lies between 175.9 and 190.6 cm? Give P as a decimal.
Hole diameters D are normal with mean 25.02 mm and standard deviation 0.02 mm. Shaft diameters d are independent and normal with mean 25 mm and standard deviation 0.015 mm. A randomly chosen shaft fits when D − d > 0. Find the probability P that it fits. Round z to two decimals.
A sample of 30 items has mean 14 and standard deviation s = 9.5. The population is roughly normal. Find the lower limit of the 95% confidence interval for the mean.
The diameters of 21 machined shafts have a sample standard deviation of 11.9 µm. Assuming the diameters are normally distributed, find the lower limit σ of the 95% confidence interval for the population standard deviation. With df = 20, 2.5% of the χ² distribution lies below 9.591 and 2.5% lies above 34.17.
A sample of 81 students has a mean score of 502.6 and a sample standard deviation of 8. Find the test statistic t for H₀: μ = 500.
In a trial, 50 of 200 patients on treatment A recover, and 83 of 250 patients on treatment B. Using the pooled proportion, find the test statistic z for H₀: p₁ = p₂.
The table gives 6 paired observations of x = advertising spend in k€ and y = sales in k€. Find Pearson's correlation coefficient r.
The table gives 6 paired observations of x = temperature in °C and y = ice creams sold. Use the least-squares line ŷ = a + b·x. Predict ŷ for x = 18.5.
The contingency table shows observed counts. For a chi-square test of independence, find the expected count E for the cell “staff, bus”.
A chi-square goodness-of-fit test compares observed counts in 10 categories with fully specified expected proportions (no parameters are estimated from the data). Using the table, find the critical value χ²crit at significance level α = 0.05.
Answer: P = 0.582
Normal distribution: convert a value x to a z-score, z = (x − μ)/σ, which counts standard deviations from the mean. A z-table (or Φ(z)) gives the area to the left of z, which is P(X < x). The area to the right is 1 − Φ(z), and the area between two values is the difference of their two areas.
Answer: P = 0.7881
Sums and differences of normal variables: if X and Y are independent and normal, X + Y and X − Y are normal too. Means add or subtract: E(X ± Y) = μX ± μY. Variances always add, also for a difference: Var(X ± Y) = σX² + σY², so σ = √(σX² + σY²). Standard deviations never add directly. The total of n independent items with the same distribution has mean n·μ and standard deviation σ·√n. Then standardise as usual: z = (x − mean)/σ and read Φ(z).
Answer: lower limit = 10.45
Confidence interval for a mean: x̄ ± margin of error. With a known population σ the margin is z·σ/√n; with only the sample standard deviation s, use t with n − 1 degrees of freedom: t·s/√n. Critical values: z = 1.645 (90%), 1.96 (95%), 2.576 (99%). To get a margin E or smaller, you need n ≥ (z·σ/E)², rounded up.
Answer: σ = 9.104 µm
Interval for a variance: (n − 1)s²/σ² has a χ² distribution with n − 1 degrees of freedom. The 95% interval for σ² runs from (n − 1)s² divided by the upper χ² value (2.5% above it) to (n − 1)s² divided by the lower χ² value (2.5% below it); the interval for σ is the square root of both limits. It is not symmetric around s.
95% interval for σ: [9.104, 17.18] µm.
Answer: t = 2.925
Testing a mean: the test statistic measures how many standard errors the sample mean lies from the value claimed in H₀: z = (x̄ − μ₀)/(σ/√n) when σ is known, t = (x̄ − μ₀)/(s/√n) when it is estimated from the sample. A confidence interval is x̄ ± (critical value)·(standard error).
|t| > 1.99, so H₀ is rejected at the 5% level (two-sided).
Answer: z = −1.894
Hypothesis test: the test statistic = (estimate − value under H₀)/(standard error under H₀). The p-value is the probability, assuming H₀ is true, of a statistic at least as extreme as the one observed: the area in one tail for a one-sided H₁, twice the tail area for a two-sided H₁. Reject H₀ when p ≤ α.
|z| < 1.96, so H₀ is not rejected at the 5% level (two-sided).
Answer: r = 0.9708
Least-squares regression: with x̄ and ȳ the means, Sxx = Σ(x − x̄)², Syy = Σ(y − ȳ)² and Sxy = Σ(x − x̄)(y − ȳ), the line ŷ = a + b·x has slope b = Sxy/Sxx and intercept a = ȳ − b·x̄, so it always passes through (x̄, ȳ). Pearson's correlation coefficient r = Sxy/√(Sxx·Syy) lies between −1 and 1; r² is the fraction of the variation in y explained by the line.
Answer: ŷ = 85.06
Least-squares regression: with x̄ and ȳ the means, Sxx = Σ(x − x̄)², Syy = Σ(y − ȳ)² and Sxy = Σ(x − x̄)(y − ȳ), the line ŷ = a + b·x has slope b = Sxy/Sxx and intercept a = ȳ − b·x̄, so it always passes through (x̄, ȳ). Pearson's correlation coefficient r = Sxy/√(Sxx·Syy) lies between −1 and 1; r² is the fraction of the variation in y explained by the line.
Answer: E = 28.21
Chi-square tests: compare observed counts O with the counts E expected under H₀ using χ² = Σ(O − E)²/E. Goodness of fit: E = n·p for each category, df = k − 1 (minus one more for each parameter estimated from the data). Independence in an r × c table: E = row total × column total / grand total, df = (r − 1)(c − 1). Reject H₀ when χ² exceeds the critical value for the chosen α.
Answer: χ²crit = 16.92
Chi-square tests: compare observed counts O with the counts E expected under H₀ using χ² = Σ(O − E)²/E. Goodness of fit: E = n·p for each category, df = k − 1 (minus one more for each parameter estimated from the data). Independence in an r × c table: E = row total × column total / grand total, df = (r − 1)(c − 1). Reject H₀ when χ² exceeds the critical value for the chosen α.
Reject H₀ if the computed χ² is larger than this value.
ExamProblems · examproblems.com/courses/statistics-2-inference