Formula sheets, the key method steps for every topic and 10 practice problems, with full solutions at the back.
The masses of passengers with luggage are independent and normal with mean 85 kg and standard deviation 12 kg. Find the probability P that the total mass of 6 of them exceeds 465.9 kg. Round z to two decimals.
The exam scores are normally distributed with mean 65 points and standard deviation 10 points. Find the value x below which 99% of them lie (the 99th percentile).
A sample of 13 items has mean 26.5 and standard deviation s = 7. The population is roughly normal. Find the margin of error E of a 90% confidence interval for the mean.
The diameters of 10 machined shafts have a sample standard deviation of 7.6 µm. Assuming the diameters are normally distributed, find the upper limit σ of the 95% confidence interval for the population standard deviation. With df = 9, 2.5% of the χ² distribution lies below 2.7 and 2.5% lies above 19.023.
A sample of 81 students has a mean score of 49.02 and a sample standard deviation of 4. Find the test statistic t for H₀: μ = 50.
A sample of 49 measurements has mean 100.9. The population standard deviation is 20. Find the lower limit L of the 90% confidence interval for the mean.
The table gives 6 paired observations of x = hours studied and y = exam score. Find Pearson's correlation coefficient r.
The table gives 5 paired observations of x = load in kN and y = extension in mm. Use the least-squares line ŷ = a + b·x. Predict ŷ for x = 7.
The contingency table shows observed counts. For a chi-square test of independence, find the expected count E for the cell “urban, low”.
A chi-square goodness-of-fit test compares observed counts in 7 categories with fully specified expected proportions (no parameters are estimated from the data). How many degrees of freedom df does the test have?
Answer: P = 0.9332
Sums and differences of normal variables: if X and Y are independent and normal, X + Y and X − Y are normal too. Means add or subtract: E(X ± Y) = μX ± μY. Variances always add, also for a difference: Var(X ± Y) = σX² + σY², so σ = √(σX² + σY²). Standard deviations never add directly. The total of n independent items with the same distribution has mean n·μ and standard deviation σ·√n. Then standardise as usual: z = (x − mean)/σ and read Φ(z).
Answer: x = 88.26 points
Normal distribution: convert a value x to a z-score, z = (x − μ)/σ, which counts standard deviations from the mean. A z-table (or Φ(z)) gives the area to the left of z, which is P(X < x). The area to the right is 1 − Φ(z), and the area between two values is the difference of their two areas.
Answer: E = 3.46
Confidence interval for a mean: x̄ ± margin of error. With a known population σ the margin is z·σ/√n; with only the sample standard deviation s, use t with n − 1 degrees of freedom: t·s/√n. Critical values: z = 1.645 (90%), 1.96 (95%), 2.576 (99%). To get a margin E or smaller, you need n ≥ (z·σ/E)², rounded up.
Answer: σ = 13.88 µm
Interval for a variance: (n − 1)s²/σ² has a χ² distribution with n − 1 degrees of freedom. The 95% interval for σ² runs from (n − 1)s² divided by the upper χ² value (2.5% above it) to (n − 1)s² divided by the lower χ² value (2.5% below it); the interval for σ is the square root of both limits. It is not symmetric around s.
95% interval for σ: [5.228, 13.88] µm.
Answer: t = −2.205
Testing a mean: the test statistic measures how many standard errors the sample mean lies from the value claimed in H₀: z = (x̄ − μ₀)/(σ/√n) when σ is known, t = (x̄ − μ₀)/(s/√n) when it is estimated from the sample. A confidence interval is x̄ ± (critical value)·(standard error).
|t| > 1.99, so H₀ is rejected at the 5% level (two-sided).
Answer: L = 96.2
Testing a mean: the test statistic measures how many standard errors the sample mean lies from the value claimed in H₀: z = (x̄ − μ₀)/(σ/√n) when σ is known, t = (x̄ − μ₀)/(s/√n) when it is estimated from the sample. A confidence interval is x̄ ± (critical value)·(standard error).
Answer: r = 0.9914
Least-squares regression: with x̄ and ȳ the means, Sxx = Σ(x − x̄)², Syy = Σ(y − ȳ)² and Sxy = Σ(x − x̄)(y − ȳ), the line ŷ = a + b·x has slope b = Sxy/Sxx and intercept a = ȳ − b·x̄, so it always passes through (x̄, ȳ). Pearson's correlation coefficient r = Sxy/√(Sxx·Syy) lies between −1 and 1; r² is the fraction of the variation in y explained by the line.
Answer: ŷ = 14.5
Least-squares regression: with x̄ and ȳ the means, Sxx = Σ(x − x̄)², Syy = Σ(y − ȳ)² and Sxy = Σ(x − x̄)(y − ȳ), the line ŷ = a + b·x has slope b = Sxy/Sxx and intercept a = ȳ − b·x̄, so it always passes through (x̄, ȳ). Pearson's correlation coefficient r = Sxy/√(Sxx·Syy) lies between −1 and 1; r² is the fraction of the variation in y explained by the line.
Answer: E = 20.96
Chi-square tests: compare observed counts O with the counts E expected under H₀ using χ² = Σ(O − E)²/E. Goodness of fit: E = n·p for each category, df = k − 1 (minus one more for each parameter estimated from the data). Independence in an r × c table: E = row total × column total / grand total, df = (r − 1)(c − 1). Reject H₀ when χ² exceeds the critical value for the chosen α.
Answer: df = 6
Chi-square tests: compare observed counts O with the counts E expected under H₀ using χ² = Σ(O − E)²/E. Goodness of fit: E = n·p for each category, df = k − 1 (minus one more for each parameter estimated from the data). Independence in an r × c table: E = row total × column total / grand total, df = (r − 1)(c − 1). Reject H₀ when χ² exceeds the critical value for the chosen α.
ExamProblems · examproblems.com/courses/statistics-2-inference