모성간호학
방법
- 여성의 시점을 파악하세요: 임신 주수, 분만 단계 또는 출산 후 일수를 확인하고, 그 시점에서 무엇이 정상인지 판단합니다.
- 위험에 처한 환자를 찾으세요: 산모, 태아, 신생아, 또는 그중 둘 이상.
- 소견을 원인과 연결하세요: 감속은 VEAL CHOP, 출혈은 4T, 출산 후에는 BUBBLE-HE.
- 혈류와 산소를 개선하는 조치(측위, 옥시토신 중단, 자궁저부 마사지)를 먼저 선택하고, 그다음 상급자에게 보고합니다.
공식 모음, 모든 주제의 핵심 풀이 단계, 연습 문제 6개가 들어 있으며 전체 풀이는 맨 뒤에 있습니다.
A woman is about to get out of bed for the first time after birth. What should the nurse do?
A newborn whose mother had a fever and prolonged rupture of membranes is well at birth. Why does the nurse monitor this baby closely?
체중 35 kg인 어린이에게 어떤 약이 4 mg/kg으로 처방되었습니다. 원액은 50 mg/mL입니다. 용량을 채우세요: 몇 V를 투여합니까?
처방은 100 마이크로그램입니다. 앰플은 0.5 mg/mL입니다. 1 mL 주사기에 용량을 채우세요: 몇 V를 투여합니까?
15 gtt/mL 세트로 점적이 50 gtt/min으로 들어갑니다. 환자는 6시간 동안 몇 mL V을 받나요?
1500 mL가 12시간에 걸쳐 처방되었습니다. 4시간 후 백에 아직 1100 mL가 남아 있는 것을 발견했고, 처방은 여전히 제시간에 끝나야 합니다. 원래 펌프 속도를 몇 퍼센트 Δ 올려야 하나요?
답: C · Help her sit, then stand slowly with support
Orthostatic hypotension is common after birth. The nurse helps her sit at the edge of the bed, dangle her legs, then stand slowly with assistance and stays close in case she feels faint.
답: D · The baby has a higher risk of early sepsis
Maternal fever, prolonged rupture of membranes and intra-amniotic infection are risk factors for early-onset sepsis. Many protocols require observation of vital signs and feeding, and sometimes blood tests or antibiotics.
답: V = 2.8 mL
용량 채우기: 부피 = (처방 용량/원액 농도) × 원액 부피. 먼저 단위를 같게 한 뒤, 그 부피가 주사기에 들어가고 눈금 하나에 맞는지 확인하세요.
이 10 mL 주사기에서는 작은 눈금 하나가 0.2 mL입니다.
답: V = 0.2 mL
용량 채우기: 부피 = (처방 용량/원액 농도) × 원액 부피. 먼저 단위를 같게 한 뒤, 그 부피가 주사기에 들어가고 눈금 하나에 맞는지 확인하세요.
답: V = 1200 mL
Infusion rates: a pump is set in mL/h = volume/time in hours. A gravity drip is counted in drops per minute: gtt/min = volume (mL) × drop factor (gtt/mL)/time (min). The drop factor is printed on the tubing package: macrodrip sets deliver 10, 15 or 20 gtt/mL (blood sets often 10 gtt/mL in the US, 15 in the UK) and microdrip sets 60 gtt/mL. Always use the drop factor the question or package gives.
답: Δ = 10 %
Infusion rates: a pump is set in mL/h = volume/time in hours. A gravity drip is counted in drops per minute: gtt/min = volume (mL) × drop factor (gtt/mL)/time (min). The drop factor is printed on the tubing package: macrodrip sets deliver 10, 15 or 20 gtt/mL (blood sets often 10 gtt/mL in the US, 15 in the UK) and microdrip sets 60 gtt/mL. Always use the drop factor the question or package gives.
많은 병원에서는 새 처방 없이 25%까지 이런 조정을 허용합니다. 기관의 규정을 확인하세요.
ExamProblems · examproblems.com/courses/maternity-nursing