모성간호학
방법
- 여성의 시점을 파악하세요: 임신 주수, 분만 단계 또는 출산 후 일수를 확인하고, 그 시점에서 무엇이 정상인지 판단합니다.
- 위험에 처한 환자를 찾으세요: 산모, 태아, 신생아, 또는 그중 둘 이상.
- 소견을 원인과 연결하세요: 감속은 VEAL CHOP, 출혈은 4T, 출산 후에는 BUBBLE-HE.
- 혈류와 산소를 개선하는 조치(측위, 옥시토신 중단, 자궁저부 마사지)를 먼저 선택하고, 그다음 상급자에게 보고합니다.
공식 모음, 모든 주제의 핵심 풀이 단계, 연습 문제 6개가 들어 있으며 전체 풀이는 맨 뒤에 있습니다.
In which order do the final cardinal movements of labour occur after extension?
A breastfeeding mother asks whether she can have a progestin-only implant before discharge. Which reply is best?
몸무게 41 kg인 환자의 체표면적은 1.16 m²입니다. 처방은 175 mg/m²입니다. 용량 D을 mg으로 구하세요.
체중 20 kg인 아동에게 5 mL에 250 mg이 들어 있는 경구 현탁액이 회당 20 mg/kg로 처방되었습니다. 투여할 부피 V는 얼마입니까?
20방울/mL 세트로 500 mL를 12시간 동안 주입합니다. 점적 속도 R를 분당 방울 수로 구하세요. 가장 가까운 정수로 반올림하세요.
1000 mL가 8시간에 걸쳐 처방되었습니다. 4시간 후 백에 아직 550 mL가 남아 있는 것을 발견했고, 처방은 여전히 제시간에 끝나야 합니다. 원래 펌프 속도를 몇 퍼센트 Δ 올려야 하나요?
답: D · Restitution, external rotation, expulsion
After extension delivers the head, it rotates back into line with the shoulders (restitution), then rotates further as the shoulders turn (external rotation), and finally the body is born (expulsion).
답: B · Progestin-only methods are compatible with breastfeeding
Progestin-only methods such as implants, injections and pills do not have a clinically important effect on milk supply. Oestrogen-containing methods are usually avoided in the first weeks.
답: D = 203 mg
Body-surface-area dosing: many cytotoxic and some paediatric doses are prescribed per square metre of body surface area: dose (mg) = dose per m² × BSA (m²). The Mosteller formula estimates BSA = √(height (cm) × weight (kg)/3600).
답: V = 8 mL
투약 용량 계산: 투여량은 처방 용량을 보유 약물의 함량으로 나누고, 그 함량이 들어 있는 양을 곱한 것입니다: 투여량 = (처방 용량/원액 함량) × 원액 부피. 항상 단위를 맞추고(먼저 g을 mg으로, mg을 mcg으로 바꾸기) 답이 타당한지 확인하세요.
답: R = 14 gtt/min
주입 속도: 펌프는 mL/h = 부피/시간(시간 단위)으로 설정합니다. 중력 점적은 분당 방울 수로 셉니다: gtt/min = 부피(mL) × 점적 계수(gtt/mL)/시간(min). 점적 계수는 수액 세트 포장에 인쇄되어 있습니다: 대점적 세트는 10, 15, 20 gtt/mL(수혈 세트는 미국에서 흔히 10 gtt/mL, 영국에서 15), 미세 점적 세트는 60 gtt/mL입니다. 항상 문제나 포장에 나온 점적 계수를 사용하세요.
침상에서는 가장 가까운 정수 방울로 맞춥니다: 14방울/분.
답: Δ = 10 %
Infusion rates: a pump is set in mL/h = volume/time in hours. A gravity drip is counted in drops per minute: gtt/min = volume (mL) × drop factor (gtt/mL)/time (min). The drop factor is printed on the tubing package: macrodrip sets deliver 10, 15 or 20 gtt/mL (blood sets often 10 gtt/mL in the US, 15 in the UK) and microdrip sets 60 gtt/mL. Always use the drop factor the question or package gives.
많은 병원에서는 새 처방 없이 25%까지 이런 조정을 허용합니다. 기관의 규정을 확인하세요.
ExamProblems · examproblems.com/courses/maternity-nursing