แบบฝึกหัด (ค่าสมมติ ไม่ใช่คำแนะนำทางคลินิก) การให้ vancomycin แบบหยดต่อเนื่องที่ 100 mg/h โดยไม่มีขนาดยาเริ่มต้น ค่าการกำจัดของผู้ป่วยคือ 5 L/h และครึ่งชีวิตคือ 8 h ระดับยา C หลังผ่านไป 3 h เป็นเท่าใด
R = 100 mg/hCL = 5 L/ht½ = 8 ht = 3 h
C = mg/L
3สารละลาย
1.เภสัชวิทยา
คำตอบ: D · Take it after food with a full glass of water
เหตุผลที่เป็นคำตอบนี้
Nausea is the most common adverse effect of varenicline and is reduced by taking it after food with water. Patients should also report changes in mood or behaviour.
คำตอบ
D · Take it after food with a full glass of water
2.เภสัชวิทยา
คำตอบ: B · Acid suppression plus at least two antibiotics, often with bismuth, for 14 days
เหตุผลที่เป็นคำตอบนี้
Eradication combines acid suppression (usually a PPI) with at least two antibiotics; bismuth quadruple therapy for 14 days is now often first-line because clarithromycin resistance makes older triple therapy fail. Taking every dose matters, and cure is confirmed with a breath or stool test.
คำตอบ
B · Acid suppression plus at least two antibiotics, often with bismuth, for 14 days
3.การคำนวณขนาดยา
คำตอบ: D = 82.5 mg
Body-surface-area dosing: many cytotoxic and some paediatric doses are prescribed per square metre of body surface area: dose (mg) = dose per m² × BSA (m²). The Mosteller formula estimates BSA = √(height (cm) × weight (kg)/3600).
ขนาดยา
D = 75·1.1 = 82.5 mg
คำตอบ
D = 82.5 mg
4.การคำนวณขนาดยา
คำตอบ: R = 40 mL/h
การคำนวณขนาดยา: ปริมาณที่ต้องให้เท่ากับสิ่งที่สั่งหารด้วยสิ่งที่มี คูณด้วยปริมาณที่บรรจุมา: ปริมาณ = (ขนาดยาที่ต้องการ/ความแรงของสต็อก) × ปริมาตรสต็อก ใช้หน่วยให้ตรงกันเสมอ (แปลง g เป็น mg และ mg เป็น mcg ก่อน) และตรวจสอบว่าคำตอบสมเหตุสมผล
ความเข้มข้น
25000/500 = 50 หน่วย/mL
อัตราของเครื่องปั๊ม
R = 2000/50 = 40 mL/h
คำตอบ
R = 40 mL/h
5.เภสัชจลนศาสตร์ทางคลินิก
คำตอบ: LD = 570.7 mg
ค่าการกำจัดและปริมาตร: ที่สภาวะคงที่ อัตราการให้ยาเท่ากับอัตราการกำจัด ดังนั้นอัตรารักษาระดับ = CL × Css ขนาดยาเริ่มต้นคือ LD = Vd × C/(S × F) โดย S คือ salt factor (สัดส่วนของตัวยาออกฤทธิ์ในเกลือ) และ F คือชีวประสิทธิผล (1 สำหรับทางหลอดเลือดดำ) จากระดับยาสองค่า k = ln(C₁/C₂)/Δt; สำหรับการฉีดเข้าหลอดเลือดดำแบบ bolus Vd = ขนาดยา/C₀ และ CL = k × Vd ตัวเลขใช้สำหรับฝึกเท่านั้น ข้างเตียงผู้ป่วยต้องปฏิบัติตามแนวทางของสถานพยาบาลเสมอ และให้มีการตรวจสอบขนาดยาความเสี่ยงสูงซ้ำสองครั้ง