A patient starting sulfasalazine should be told about which harmless effect?
AOrange-yellow colouring of the urine
BBlue colouring of the tongue and gums
CWhite spots on the nails
DGreen colouring of the sweat
2.เภสัชวิทยายาก
During an alteplase infusion for acute ischaemic stroke, the patient develops a sudden severe headache and her level of consciousness falls. What is the nurse's first action?
ASlow the infusion to half the rate and recheck in 30 minutes
BStop the alteplase infusion and notify the provider urgently
CGive a bolus of heparin to prevent a new clot
DGive paracetamol for the headache and continue the infusion
3.การคำนวณขนาดยาปานกลาง
ขวดยามีผงยา 1 g ฉลากระบุว่า: เติมน้ำสำหรับฉีด 3.4 mL ได้ปริมาตรรวม 4 mL คำสั่งใช้ยาคือ 150 mg ต้องให้สารละลายที่ผสมละลายแล้วปริมาตรเท่าใด V
1 g+ 3.4 mL → 4 mL150 mg
V = mL
4.การคำนวณขนาดยายาก
สารน้ำมียา 25000 หน่วยใน 500 mL ใบสั่งคือ 800 หน่วยต่อชั่วโมง ต้องตั้งเครื่องปั๊มที่อัตราเท่าใด R ในหน่วย mL/h
Sulfasalazine can colour urine and sometimes skin and contact lenses orange-yellow. More serious adverse effects include blood disorders and rash, so blood counts are monitored.
คำตอบ
A · Orange-yellow colouring of the urine
2.เภสัชวิทยา
คำตอบ: B · Stop the alteplase infusion and notify the provider urgently
เหตุผลที่เป็นคำตอบนี้
A sudden headache and neurological decline during thrombolysis suggest intracranial haemorrhage. The infusion is stopped at once and the provider is called for urgent assessment and imaging.
คำตอบ
B · Stop the alteplase infusion and notify the provider urgently
3.การคำนวณขนาดยา
คำตอบ: V = 0.6 mL
Dose calculation: the amount to give equals what is prescribed divided by what you have, times the quantity it comes in: amount = (desired dose/stock strength) × stock volume. Always keep the units the same (convert g to mg, mg to mcg first) and check that the answer is sensible.
ความเข้มข้นหลังผสม
1000 mg/4 mL = 250 mg/mL
ปริมาตร
V = 150/250 = 0.6 mL
คำตอบ
V = 0.6 mL
4.การคำนวณขนาดยา
คำตอบ: R = 16 mL/h
การคำนวณขนาดยา: ปริมาณที่ต้องให้เท่ากับสิ่งที่สั่งหารด้วยสิ่งที่มี คูณด้วยปริมาณที่บรรจุมา: ปริมาณ = (ขนาดยาที่ต้องการ/ความแรงของสต็อก) × ปริมาตรสต็อก ใช้หน่วยให้ตรงกันเสมอ (แปลง g เป็น mg และ mg เป็น mcg ก่อน) และตรวจสอบว่าคำตอบสมเหตุสมผล
ความเข้มข้น
25000/500 = 50 หน่วย/mL
อัตราของเครื่องปั๊ม
R = 800/50 = 16 mL/h
คำตอบ
R = 16 mL/h
5.เภสัชจลนศาสตร์ทางคลินิก
คำตอบ: Vd = 14.44 L
ค่าการกำจัดและปริมาตร: ที่สภาวะคงที่ อัตราการให้ยาเท่ากับอัตราการกำจัด ดังนั้นอัตรารักษาระดับ = CL × Css ขนาดยาเริ่มต้นคือ LD = Vd × C/(S × F) โดย S คือ salt factor (สัดส่วนของตัวยาออกฤทธิ์ในเกลือ) และ F คือชีวประสิทธิผล (1 สำหรับทางหลอดเลือดดำ) จากระดับยาสองค่า k = ln(C₁/C₂)/Δt; สำหรับการฉีดเข้าหลอดเลือดดำแบบ bolus Vd = ขนาดยา/C₀ และ CL = k × Vd ตัวเลขใช้สำหรับฝึกเท่านั้น ข้างเตียงผู้ป่วยต้องปฏิบัติตามแนวทางของสถานพยาบาลเสมอ และให้มีการตรวจสอบขนาดยาความเสี่ยงสูงซ้ำสองครั้ง