1.Easy
What is the name of the data unit at the data link layer?
- ASegment
- BPacket
- CFrame
- DMessage
2.Easy
What is the broadcast address of the network 192.168.1.0/24?
- A192.168.1.0
- B255.255.255.0
- C192.168.1.1
- D192.168.1.255
3.Easy
In the client-server model:
- AEvery computer stores the whole internet
- BAll devices must be in the same room
- CServers send requests and clients answer them
- DClients send requests and a server provides the service
4.Medium
How many usable host addresses does a /24 IPv4 network have?
- A254
- B256
- C255
- D252
5.Medium
Using even parity, which parity bit is added to the data bits 1011001?
- A4
- B2
- C1
- D0
6.Medium
Why does Wi-Fi use collision avoidance (CSMA/CA) instead of collision detection?
- AA wireless station cannot reliably detect collisions while it is transmitting
- BCollision detection only works on fibre cables, not on shared wireless radio channels
- CWi-Fi only allows one device per network
- DRadio signals never collide
7.Hard
Why does TCP choose an unpredictable initial sequence number for each connection?
- ATo encrypt the payload of each segment
- BTo avoid confusion with old segments and make spoofed segments harder to inject
- CTo select the best route to the destination for the segments of that connection
- DTo compress the data more efficiently
8.Hard
You must divide 192.168.1.0/24 into at least 5 subnets with up to 25 hosts each. Which prefix length fits best?
- A/25
- B/26
- C/28
- D/27
Answer key
- 1. C · Frame
- 2. D · 192.168.1.255
- 3. D · Clients send requests and a server provides the service
- 4. A · 254
- 5. D · 0
- 6. A · A wireless station cannot reliably detect collisions while it is transmitting
- 7. B · To avoid confusion with old segments and make spoofed segments harder to inject
- 8. D · /27
Full step-by-step solutions: practise this topic on examproblems.com.