1.Easy
What is the name of the data unit at the data link layer?
- AFrame
- BSegment
- CMessage
- DPacket
2.Easy
Which protocol is used to send email between mail servers?
- APOP3
- BIMAP
- CSNMP
- DSMTP
3.Easy
What does LAN stand for?
- ALinked application node
- BLogical address number
- CLarge access network
- DLocal area network
4.Medium
Why does a switch sometimes send a frame out of all ports except the one it came in on?
- AThe frame has a wrong IP checksum and must be checked by every host
- BThe switch is acting as a router
- CThe frame is too large for one port
- DThe destination MAC address is not yet in its address table
5.Medium
What is the IPv6 loopback address?
- A::1
- Bff02::1
- Cfe80::1
- D::
6.Medium
What does an MX record in DNS specify?
- AThe name servers for a zone
- BThe IPv4 address of a web server
- CThe mail servers that accept email for a domain
- DAn alias name for another host
7.Hard
What is the maximum transmission unit (MTU) of standard Ethernet payload?
- A1500 bytes
- B65,535 bytes
- C9000 bytes in every network
- D64 bytes
8.Hard
How does a content delivery network (CDN) mainly improve web performance?
- AIt removes the need for DNS lookups
- BIt increases the bandwidth of the users' own home connections
- CIt replaces TCP with a faster transport protocol
- DIt serves cached content from servers close to the users
Answer key
- 1. A · Frame
- 2. D · SMTP
- 3. D · Local area network
- 4. D · The destination MAC address is not yet in its address table
- 5. A · ::1
- 6. C · The mail servers that accept email for a domain
- 7. A · 1500 bytes
- 8. D · It serves cached content from servers close to the users
Full step-by-step solutions: practise this topic on examproblems.com.