1.Easy
Which IEEE standard family defines wired Ethernet?
- AIEEE 802.5
- BIEEE 802.16
- CIEEE 802.3
- DIEEE 802.11
2.Easy
What is the broadcast address of the network 192.168.1.0/24?
- A192.168.1.255
- B255.255.255.0
- C192.168.1.0
- D192.168.1.1
3.Easy
What is the name of the data unit at the data link layer?
- ASegment
- BFrame
- CMessage
- DPacket
4.Medium
What is the network address of the host 192.168.10.77/26?
- A192.168.10.76
- B192.168.10.128
- C192.168.10.64
- D192.168.10.0
5.Medium
NAT (network address translation) is mainly used to:
- AIncrease the speed of a network cable
- BLet many devices with private addresses share one public IP address
- CEncrypt traffic between two sites
- DTranslate domain names into IP addresses for devices on a local network
6.Medium
Why is UDP often preferred for live video calls?
- ALow delay matters more than retransmitting every lost packet
- BUDP encrypts data automatically
- CUDP is required for all video
- DUDP guarantees every packet arrives, so the picture never freezes
7.Hard
Why does IPv6 not need NAT for address shortage?
- AIts 128-bit address space is large enough to give every device a global address
- BIPv6 only works on local networks, so addresses never need to be shared globally
- CIPv6 encrypts all addresses
- DIPv6 does not use addresses
8.Hard
Hosts in VLAN 10 and VLAN 20 on the same switch cannot communicate. What is needed?
- AA router or layer 3 switch to route between the VLANs
- BThe same MAC address on both hosts
- CA hub connected to both VLANs
- DA longer cable between the hosts
Answer key
- 1. C · IEEE 802.3
- 2. A · 192.168.1.255
- 3. B · Frame
- 4. C · 192.168.10.64
- 5. B · Let many devices with private addresses share one public IP address
- 6. A · Low delay matters more than retransmitting every lost packet
- 7. A · Its 128-bit address space is large enough to give every device a global address
- 8. A · A router or layer 3 switch to route between the VLANs
Full step-by-step solutions: practise this topic on examproblems.com.