Continuity & Bernoulli worksheet with answers

Free printable Continuity & Bernoulli worksheet: 6 problems from easy to exam level, with an answer key. Print it or save it as a PDF.

For teachers: free to print, copy and use in class. Every new worksheet has new values and its own answer key. A link to ExamProblems on your course page is appreciated.

Name: ____________________   Date: ____________

1.Easy
vd = 10 mmh = 1.5 m

An open water tank drains through a round opening with a diameter of 10 mm in its side. The free surface is 1.5 m above the opening. Ignoring losses and the contraction of the jet, find the flow rate Q. Use g = 9.81 m/s².

h = 1.5 mg = 9.81 m/s²d = 10 mm
Q = L/s
2.Easy
12d1​ = 100 mm, v1​ = 1.5 m/sd2​ = 50 mm, v2​ = ?

Water flows through a pipe that narrows from 100 mm to 50 mm in diameter. The velocity in the wide section is 1.5 m/s. Find the velocity v2 in the narrow section.

d1 = 100 mmd2 = 50 mmv1 = 1.5 m/s
v2 = m/s
3.Medium
12d1​ = 150 mm, p1​ = 340 kPad2​ = 75 mm, p2​ = ?

Water flows through a horizontal pipe that narrows from 150 mm to 75 mm. In the wide section the pressure is 340 kPa and the velocity is 2 m/s. Ignoring losses, find the pressure p2 in the narrow section.

d1 = 150 mmd2 = 75 mmp1 = 340 kPav1 = 2 m/sρ = 1000 kg/m³
p2 = kPa
4.Medium
v = ?p0​pp0​ − p = 350 Pastagnation point

A pitot-static tube in a wind tunnel reads a difference of 350 Pa between the stagnation pressure and the static pressure. The air density is 1.2 kg/m³. Find the air speed v.

p0 − p = 350 Paρ = 1.2 kg/m³
v = m/s
5.Hard
H = ?d1​ = 75 mmp1​ = 20 kPad2​ = 40 mm

A fountain nozzle points straight up. Just below the nozzle the supply pipe has a diameter of 75 mm and a gauge pressure of 20 kPa. The nozzle exit diameter is 40 mm, and the height difference across the nozzle is negligible. Ignoring losses and air resistance, find the height H the jet rises above the nozzle. Use g = 9.81 m/s².

d1 = 75 mmp1 = 20 kPa (gauge)d2 = 40 mmρ = 1000 kg/m³g = 9.81 m/s²
H = m
6.Hard
C212.5 m4 md = 25 mmQ = ?

A hose with an inner diameter of 25 mm siphons water from an open tank. The highest point C of the hose is 2.5 m above the water surface, and the outlet (open to the air) is 4 m below the water surface. Ignore losses and take g = 9.81 m/s². Find the flow rate Q.

d = 25 mmzC = +2.5 mz2 = −4 mg = 9.81 m/s²
Q = L/s

Answer key

  1. 1. Q = 0.4261 L/s
  2. 2. v2 = 6 m/s
  3. 3. p2 = 310 kPa
  4. 4. v = 24.15 m/s
  5. 5. H = 2.218 m
  6. 6. Q = 4.349 L/s

Full step-by-step solutions: practise this topic on examproblems.com.