The op-amp is ideal and runs from ±15 V supplies. Find the current I1 through R₁, flowing towards the op-amp.
Op-amp circuits worksheet with answers
1.Easy
Vin = −1.4 VR1 = 47 kΩRf = 100 kΩ
I1 = mA
2.Easy
The op-amp is ideal and runs from ±15 V supplies. Find the output voltage Vout.
Vin = −1.4 VR1 = 47 kΩRf = 100 kΩ
Vout = V
3.Medium
Choose the feedback resistor Rf that gives this non-inverting amplifier a voltage gain of 6.
R1 = 1 kΩAv = 6
Rf = kΩ
4.Medium
The difference amplifier uses an ideal op-amp with ±15 V supplies, with R3 = R1 and R4 = R2. Find the output voltage Vout.
V1 = −2.8 VV2 = 2.7 VR1 = R3 = 4.7 kΩR2 = R4 = 10 kΩ
Vout = V
5.Hard
The summing amplifier uses an ideal op-amp with ±15 V supplies. Find the output voltage Vout.
V1 = 1.4 VV2 = −1.4 VR1 = 47 kΩR2 = 10 kΩRf = 22 kΩ
Vout = V
6.Hard
Two ideal op-amp stages are connected in cascade: an inverting amplifier (R1, Rf1) followed by a non-inverting amplifier (R2 to ground, Rf2 in the feedback). Both run from ±15 V supplies. Find the overall voltage gain Av = Vout/Vin.
R1 = 1 kΩRf1 = 4.7 kΩR2 = 47 kΩRf2 = 47 kΩ
Av =
Answer key
- 1. I1 = −0.02979 mA
- 2. Vout = 2.979 V
- 3. Rf = 5 kΩ
- 4. Vout = 11.7 V
- 5. Vout = 2.425 V
- 6. Av = −9.4
Full step-by-step solutions: practise this topic on examproblems.com.