The op-amp is ideal and runs from ±15 V supplies. Find the output voltage Vout.
Op-amp circuits worksheet with answers
The op-amp is ideal and runs from ±15 V supplies. Find the current I1 through R₁, flowing towards the op-amp.
Choose the feedback resistor Rf that gives this non-inverting amplifier a voltage gain of 11.
The op-amp is ideal and runs from ±15 V supplies; its output saturates at ±12 V. The non-inverting amplifier is driven by a sine wave. Find the largest input amplitude Vin,max (peak value) for which the output does not clip.
The integrator uses an ideal op-amp with ±15 V supplies; its output saturates at ±12 V. The capacitor is uncharged when a constant input Vin = 1.8 V is applied at t = 0. Find the output voltage Vout at t = 20 ms.
The summing amplifier uses an ideal op-amp with ±15 V supplies. Find the output voltage Vout.
Answer key
- 1. Vout = 2.2 V
- 2. I1 = −0.06383 mA
- 3. Rf = 100 kΩ
- 4. Vin,max = 1.091 V
- 5. Vout = −0.766 V
- 6. Vout = 1.76 V
Full step-by-step solutions: practise this topic on examproblems.com.