Op-amp circuits worksheet with answers

Free printable Op-amp circuits worksheet: 6 problems from easy to exam level, with an answer key. Print it or save it as a PDF.

New worksheetPractise online with hints

For teachers: free to print, copy and use in class. Every new worksheet has new values and its own answer key. A link to ExamProblems on your course page is appreciated.

Name: ____________________   Date: ____________

1.Easy
−+Vout​Rf​ = 47 kΩVin​ = 0.5 VR1​ = 2 kΩ

The op-amp is ideal and runs from ±15 V supplies. Find the output voltage Vout.

Vin = 0.5 VR1 = 2 kΩRf = 47 kΩ
Vout = V
2.Easy
−+Vout​Rf​ = 47 kΩVin​ = 1.5 VR1​ = 22 kΩ

The circuit is an inverting amplifier. The op-amp is ideal and runs from ±15 V supplies; its output saturates at ±12 V. Find the output voltage Vout.

Vin = 1.5 VR1 = 22 kΩRf = 47 kΩVsat = ±12 V
Vout = V
3.Medium
−+Vout​Rf​ = 4.7 kΩR1​ = 2 kΩVin​

The op-amp is ideal and runs from ±15 V supplies; its output saturates at ±14 V. The non-inverting amplifier is driven by a sine wave. Find the largest input amplitude Vin,max (peak value) for which the output does not clip.

R1 = 2 kΩRf = 4.7 kΩVsat = ±14 V
Vin,max = V
4.Medium
−+Vout​R2​ = 10 kΩV1​ = 0.2 VR1​ = 1 kΩV2​ = 0.8 VR3​ = 1 kΩR4​ = 10 kΩ

The difference amplifier uses an ideal op-amp with ±15 V supplies, with R3 = R1 and R4 = R2. Find the voltage V− at the inverting input.

V1 = 0.2 VV2 = 0.8 VR1 = R3 = 1 kΩR2 = R4 = 10 kΩ
V− = V
5.Hard
−+Vout​R2​ = 22 kΩV1​ = 0.8 VR1​ = 1 kΩV2​ = 0.7 VR3​ = 100 kΩR4​ = 100 kΩ

The op-amp is ideal and runs from ±15 V supplies. The resistor ratios are not matched. Find the output voltage Vout.

V1 = 0.8 VV2 = 0.7 VR1 = 1 kΩR2 = 22 kΩR3 = 100 kΩR4 = 100 kΩ
Vout = V
6.Hard
Vin​V1​Vout​stage 1: invertingR1​ = 47 kΩRf1​ = 47 kΩstage 2: non-invertingR2​ = 10 kΩRf2​ = 4.7 kΩ

Two ideal op-amp stages are connected in cascade: an inverting amplifier (R1, Rf1) followed by a non-inverting amplifier (R2 to ground, Rf2 in the feedback). Both run from ±15 V supplies. The input is Vin = 0.6 V. Find the output voltage Vout.

R1 = 47 kΩRf1 = 47 kΩR2 = 10 kΩRf2 = 4.7 kΩVin = 0.6 V
Vout = V

Answer key

  1. 1. Vout = −11.75 V
  2. 2. Vout = −3.205 V
  3. 3. Vin,max = 4.179 V
  4. 4. V− = 0.7273 V
  5. 5. Vout = −9.55 V
  6. 6. Vout = −0.882 V

Full step-by-step solutions: practise this topic on examproblems.com.