The op-amp is ideal and runs from ±15 V supplies. Find the current I1 through R₁, flowing towards the op-amp.
Op-amp circuits worksheet with answers
The op-amp is ideal and runs from ±15 V supplies. Find the output voltage Vout.
The op-amp is ideal and runs from ±15 V supplies; its output saturates at ±13 V. The inverting amplifier is driven by a sine wave. Find the largest input amplitude Vin,max (peak value) for which the output does not clip.
Choose the feedback resistor Rf that gives this non-inverting amplifier a voltage gain of 15.
Two ideal op-amp stages are connected in cascade: an inverting amplifier (R1, Rf1) followed by a non-inverting amplifier (R2 to ground, Rf2 in the feedback). Both run from ±15 V supplies. The input is Vin = 0.35 V. Find the output voltage Vout.
The summing amplifier uses an ideal op-amp with ±15 V supplies. Find the output voltage Vout.
Answer key
- 1. I1 = 1.7 mA
- 2. Vout = −4.059 V
- 3. Vin,max = 2.777 V
- 4. Rf = 1400 kΩ
- 5. Vout = −1.802 V
- 6. Vout = −5.6 V
Full step-by-step solutions: practise this topic on examproblems.com.