An inverting amplifier with an ideal op-amp must have a voltage gain of −20. The feedback resistor is Rf = 10 kΩ. Find the input resistor R1.
Op-amp circuits worksheet with answers
The op-amp is ideal and runs from ±15 V supplies. Find the output voltage Vout.
The op-amp is ideal and runs from ±15 V supplies; its output saturates at ±14 V. The inverting amplifier is driven by a sine wave. Find the largest input amplitude Vin,max (peak value) for which the output does not clip.
Choose the feedback resistor Rf that gives this non-inverting amplifier a voltage gain of 8.
The summing amplifier uses an ideal op-amp with ±15 V supplies. Find the output voltage Vout.
The integrator uses an ideal op-amp with ±15 V supplies; its output saturates at ±12 V. The capacitor is uncharged when a constant input Vin = −2.5 V is applied at t = 0. Find the output voltage Vout at t = 2 ms.
Answer key
- 1. R1 = 0.5 kΩ
- 2. Vout = 6 V
- 3. Vin,max = 0.6364 V
- 4. Rf = 32.9 kΩ
- 5. Vout = 1.013 V
- 6. Vout = 2.273 V
Full step-by-step solutions: practise this topic on examproblems.com.