The op-amp is ideal and runs from ±15 V supplies. Find the output voltage Vout.
Op-amp circuits worksheet with answers
An inverting amplifier with an ideal op-amp must have a voltage gain of −2. The feedback resistor is Rf = 100 kΩ. Find the input resistor R1.
The op-amp is ideal and runs from ±15 V supplies; its output saturates at ±14 V. The non-inverting amplifier is driven by a sine wave. Find the largest input amplitude Vin,max (peak value) for which the output does not clip.
Choose the feedback resistor Rf that gives this non-inverting amplifier a voltage gain of 4.
The summing amplifier uses an ideal op-amp with ±15 V supplies. Find the output voltage Vout.
The integrator uses an ideal op-amp with ±15 V supplies; its output saturates at ±13 V. The capacitor is uncharged when a constant input Vin = 2.4 V is applied at t = 0. How long after t = 0 does the output reach saturation? Find t.
Answer key
- 1. Vout = −0.94 V
- 2. R1 = 50 kΩ
- 3. Vin,max = 4.179 V
- 4. Rf = 66 kΩ
- 5. Vout = −1.32 V
- 6. t = 0.5417 ms
Full step-by-step solutions: practise this topic on examproblems.com.