Pipe friction & head loss worksheet with answers

Free printable Pipe friction & head loss worksheet: 6 problems from easy to exam level, with an answer key. Print it or save it as a PDF.

New worksheetPractise online with hints

For teachers: free to print, copy and use in class. Every new worksheet has new values and its own answer key. A link to ExamProblems on your course page is appreciated.

Name: ____________________   Date: ____________

1.Easy
Q = 30 L/sD = 150 mmν = 1.14 × 10⁻⁶ m²/s

Water at 15 °C (ν = 1.14 × 10⁻⁶ m²/s) flows through a pipe with an inside diameter of 150 mm at 30 L/s. Find the Reynolds number Re.

Q = 30 L/sD = 150 mmν = 1.14 × 10⁻⁶ m²/s
Re =
2.Easy
Q = 75 L/sD = 200 mmν = 1.14 × 10⁻⁶ m²/s

Water at 15 °C (ν = 1.14 × 10⁻⁶ m²/s) flows through a pipe with an inside diameter of 200 mm at 75 L/s. Find the Reynolds number Re.

Q = 75 L/sD = 200 mmν = 1.14 × 10⁻⁶ m²/s
Re =
3.Medium
Q = 20 L/sD = 150 mmL = 50 mf = 0.022

Water flows at 20 L/s through a pipe 50 m long with an inside diameter of 150 mm. Use the Darcy friction factor f = 0.022 and g = 9.81 m/s². Find the friction head loss hf.

Q = 20 L/sL = 50 mD = 150 mmf = 0.022g = 9.81 m/s²
hf = m
4.Medium
Q = 4 L/sD = 75 mmL = 500 mf = 0.025

Water flows at 4 L/s through a pipe 500 m long with an inside diameter of 75 mm. Use the Darcy friction factor f = 0.025 and g = 9.81 m/s². Find the friction head loss hf.

Q = 4 L/sL = 500 mD = 75 mmf = 0.025g = 9.81 m/s²
hf = m
5.Hard
K = 10Δz = ?L = 400 m, D = 300 mm, f = 0.0154× bend (K = 0.3)

Two open reservoirs are joined by a pipe 400 m long with an inside diameter of 300 mm and a Darcy friction factor f = 0.015. The minor losses are a square-edged entrance (K = 0.5), 4 bends (K = 0.3 each), a valve (K = 10) and the exit into the lower reservoir (K = 1.0). Use g = 9.81 m/s². What difference in water level Δz between the reservoirs gives a flow rate of 200 L/s?

Q = 200 L/sL = 400 mD = 300 mmf = 0.015Kentrance = 0.5Kbend = 0.3 (×4)Kvalve = 10Kexit = 1.0
Δz = m
6.Hard
K = 2free outletH = ?L = 150 m, D = 300 mm, f = 0.0252× bend (K = 0.3)

A pipe 150 m long with an inside diameter of 300 mm (Darcy friction factor f = 0.025) runs from an open reservoir and discharges as a free jet into the air. The minor losses are a square-edged entrance (K = 0.5), 2 bends (K = 0.3 each) and a valve (K = 2). Use g = 9.81 m/s². How far H must the reservoir surface be above the pipe outlet for a flow rate of 100 L/s?

Q = 100 L/sL = 150 mD = 300 mmf = 0.025Kentrance = 0.5Kbend = 0.3 (×2)Kvalve = 2
H = m

Answer key

  1. 1. Re = 223375
  2. 2. Re = 418829
  3. 3. hf = 0.4788 m
  4. 4. hf = 6.964 m
  5. 5. Δz = 13.34 m
  6. 6. H = 1.693 m

Full step-by-step solutions: practise this topic on examproblems.com.