Calculus 2: cram pack

Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Sequences & series

Arithmetic sequence
aₙ = a₁ + (n − 1)d, Sₙ = n(a₁ + aₙ)/2
Geometric sequence
aₙ = a₁rⁿ⁻¹, Sₙ = a₁(1 − rⁿ)/(1 − r)
Infinite geometric series
S = a₁/(1 − r), |r| < 1
p-series
Σ1/kᵖ converges only for p > 1
Ratio test
L = lim |ak+1/ak|: L < 1 converges, L > 1 diverges
Radius of convergence
R = lim |ck/ck+1|
Taylor polynomial
Pₙ(x) = Σ f⁽ᵏ⁾(a)(x − a)ᵏ/k!
Maclaurin series
eˣ = Σxᵏ/k!, sin x = x − x³/3! + …, cos x = 1 − x²/2! + …, ln(1 + x) = x − x²/2 + …
Lagrange error bound
|Rₙ| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!

Method

  1. Identify the type: arithmetic (constant difference), geometric (constant ratio), a standard series, a power series or a Taylor polynomial.
  2. For sums use Sₙ = n(a₁ + aₙ)/2, Sₙ = a₁(1 − rⁿ)/(1 − r), or S = a₁/(1 − r) when |r| < 1, with a₁ the first term of the sum.
  3. For convergence: n-th term test first, then compare with Σ1/kᵖ or a geometric series, and use the ratio or root test for factorials and k-th powers.
  4. For Taylor polynomials list f(a), f′(a), f″(a), …, divide the k-th derivative by k!, and bound the error with M·|x − a|ⁿ⁺¹/(n + 1)!.

Multivariable calculus

Partial derivatives
fx = ∂f/∂x (y constant), fxy = fyx
Gradient
∇f = (fx, fy), largest slope |∇f|
Directional derivative
Duf = ∇f·u, u = v/|v|
Tangent plane
z = f(a, b) + fx(x − a) + fy(y − b)
Chain rule
dz/dt = fx·dx/dt + fy·dy/dt
Second-derivative test
D = fxxfyy − fxy²: D > 0, fxx > 0 minimum; D > 0, fxx < 0 maximum; D < 0 saddle
Double integral
∬R f dA = ∫ab∫g(x)h(x) f dy dx
Polar coordinates
x = r cos θ, y = r sin θ, dA = r dr dθ

Method

  1. For a partial derivative, treat the other variable as a constant and use the one-variable rules.
  2. For gradient questions compute ∇f = (fx, fy) at the point; use |∇f| for the steepest slope and ∇f·u with a unit vector u for a directional derivative.
  3. For extrema solve fx = 0 and fy = 0 together, then classify every point with D = fxx·fyy − fxy².
  4. For a double integral sketch the region, choose the order (or polar coordinates for discs) so the inner limits are the bounding curves, and integrate inside first.

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

2Practice problems

1.IntegralsMedium
xy3y = x

The region under y = x from x = 0 to x = 3 is rotated about the x-axis. Find the volume V of the solid (a cone).

y = x0 ≤ x ≤ 3
V =
2.IntegralsHard
xyy = 2x2​y = 3x

Find the area A of the region enclosed by y = 2x2 and y = 3x.

y = 2x2y = 3x
A =
3.Sequences & seriesMedium
xx₀ = 0??R

Find the radius of convergence R of the power series Σk=1∞ 25ᵏx²ᵏ/k.

Σ 25ᵏx²ᵏ/kx₀ = 0
R =
4.Sequences & seriesHard

f(x) = sin x is approximated at x = 1 by its Maclaurin polynomial of degree n. With the Lagrange bound M·|x|ⁿ⁺¹/(n + 1)! and M = 1, find the smallest degree n that guarantees an error below 0.001.

f(x) = sin xx = 1M = 1ε = 0.001
n =
5.Multivariable calculusMedium
xy0.5−1P

The tangent plane to z = 3 sin(−2x − 2y) at the point where (x, y) = (0.5, −1) can be written as z = px + qy + c. Find c.

f(x, y) = 3 sin(−2x − 2y)(a, b) = (0.5, −1)
c =
6.Multivariable calculusHard
xyy = 1.2y = x1.21.2

The integral I = ∫01.2 ∫x1.2 1/(1 + y²)² dy dx cannot be done in this order. Reverse the order of integration and evaluate it.

f = 1/(1 + y²)²0 ≤ x ≤ y ≤ 1.2
I =
7.Differential equationsMedium
tyy(0) = 1y(1.5) = ?

Solve y″ + 8y′ + 16y = 0 with y(0) = 1 and y′(0) = 4. Find y(1.5).

y″ + 8y′ + 16y = 0y(0) = 1y′(0) = 4
y(1.5) =
8.Differential equationsHard
tyy(0) = 3y(0.5) = ?

Solve y″ + 3y′ + 6.25y = 0 with y(0) = 3 and y′(0) = 0 (released from rest). Find y(0.5); angles in radians.

y″ + 3y′ + 6.25y = 0y(0) = 3y′(0) = 0
y(0.5) =

3Solutions

1.Integrals

Answer: V = 28.27

Volumes of revolution: rotating the region under y = f(x) from x = a to x = b about the x-axis makes a solid whose cross-section at x is a disc of radius f(x). Adding the discs gives V = π∫ₐᵇ f(x)² dx. When the region lies between an outer curve R(x) and an inner curve r(x), each slice is a washer: V = π∫ₐᵇ (R(x)² − r(x)²) dx. Square the radii before you subtract them.

Disc method

V = π∫₀3 1x² dx

Integrate

V = π·1·3³/3 = 28.27

Answer

V = 28.27

Check: a cone of radius 3 and height 3 has (1/3)πr²h = 28.27.

2.Integrals

Answer: A = 1.125

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Intersection points

2x2 = 3x → x = 0, x = 1.5

Integrate upper minus lower

A = [1.5x2 − 0.6667x3]01.5 = 1.125

Answer

A = 1.125
3.Sequences & series

Answer: R = 0.2

Convergence: if the terms do not tend to 0 the series diverges (n-th term test). Σ1/kᵖ converges only for p > 1, and Σrᵏ only for |r| < 1. Compare a series with one of these when its terms behave like them for large k. Ratio test: L = lim |ak+1/ak|; root test: L = lim |ak|1/k. L < 1 converges, L > 1 diverges, L = 1 decides nothing. A power series Σck(x − x₀)ᵏ converges for |x − x₀| < R with R = lim |ck/ck+1|; an alternating series with terms decreasing to 0 converges.

Coefficients

The series is in x²: it converges for 25·x² < 1, so |x| < 1/5.

Radius

R = 0.2

Answer

R = 0.2

The ratio test says nothing at the two end points; they have to be checked separately.

4.Sequences & series

Answer: n = 6

Taylor polynomials: near x = a a smooth function is approximated by Pₙ(x) = f(a) + f′(a)(x − a) + f″(a)(x − a)²/2! + … + f⁽ⁿ⁾(a)(x − a)ⁿ/n!; for a = 0 this is the Maclaurin polynomial. Standard series: eˣ = Σxᵏ/k!, sin x = x − x³/3! + x⁵/5! − …, cos x = 1 − x²/2! + x⁴/4! − …, ln(1 + x) = x − x²/2 + x³/3 − …, 1/(1 − x) = Σxᵏ. Lagrange error bound: |f(x) − Pₙ(x)| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!, where M is the largest value of |f⁽ⁿ⁺¹⁾| between a and x.

n(n + 1)!bound011120.5260.16673240.0416741200.00833357200.001389650400.0001984

Bounds for increasing n

n = 5: 0.001389 ≥ 0.001
n = 6: 0.0001984 < 0.001

Smallest degree

n = 6

Answer

n = 6
5.Multivariable calculus

Answer: c = 0.9035

Gradient: ∇f = (fx, fy) points in the direction of steepest ascent, and |∇f| is the largest rate of change. The directional derivative along a direction v is Duf = ∇f·u with the unit vector u = v/|v|. The tangent plane at (a, b) is z = f(a, b) + fx(a, b)(x − a) + fy(a, b)(y − b); it gives the linear approximation of f near that point. Chain rule: dz/dt = fx·dx/dt + fy·dy/dt.

Value and slopes at the point

f(0.5, −1) = 2.524
fx = −6 cos(−2x − 2y) → fx(0.5, −1) = −3.242
fy = −6 cos(−2x − 2y) → fy(0.5, −1) = −3.242

Tangent plane

z = 2.524 − 3.242(x − 0.5) − 3.242(y + 1)
z = −3.242x − 3.242y + 0.9035

Constant term

c = 0.9035

Answer

c = 0.9035
6.Multivariable calculus

Answer: I = 0.2951

Critical points and double integrals: a critical point has fx = fy = 0. Second-derivative test with D = fxxfyy − fxy²: D > 0 and fxx > 0 is a local minimum, D > 0 and fxx < 0 a local maximum, D < 0 a saddle point, and D = 0 decides nothing. For a double integral over a general region, let the inner limits be the curves that bound the region; for discs and sectors use polar coordinates, x = r cos θ, y = r sin θ and dA = r dr dθ (do not forget the factor r).

Region

0 ≤ x ≤ y, 0 ≤ y ≤ 1.2

Reversed order

I = ∫01.2 ∫0y 1/(1 + y²)² dx dy = ∫01.2 y·1/(1 + y²)² dy

Substitution u = y²

I = [−1/(2(1 + y²))]01.2 = 0.2951

Answer

I = 0.2951
7.Differential equations

Answer: y(1.5) = 0.03222

Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.

Double root

(r + 4)² = 0 → r = −4

Constants

A = y(0) = 1
y′(0) = B − 4A → B = 4 + 4 = 8

Evaluate

y(1.5) = (1 + 8·1.5)·e−6 = 0.03222

Answer

y(1.5) = 0.03222
8.Differential equations

Answer: y(0.5) = 1.66

Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.

Complex roots

r = −1.5 ± 2j

Constants

A = 3, B = 1.5·3/2 = 2.25

Evaluate

y(0.5) = e−0.75(3·cos 1 + 2.25·sin 1) = 1.66

Answer

y(0.5) = 1.66

ExamProblems · examproblems.com/courses/calculus-2