Calculus 2: cram pack

Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Sequences & series

Arithmetic sequence
aₙ = a₁ + (n − 1)d, Sₙ = n(a₁ + aₙ)/2
Geometric sequence
aₙ = a₁rⁿ⁻¹, Sₙ = a₁(1 − rⁿ)/(1 − r)
Infinite geometric series
S = a₁/(1 − r), |r| < 1
p-series
Σ1/kᵖ converges only for p > 1
Ratio test
L = lim |ak+1/ak|: L < 1 converges, L > 1 diverges
Radius of convergence
R = lim |ck/ck+1|
Taylor polynomial
Pₙ(x) = Σ f⁽ᵏ⁾(a)(x − a)ᵏ/k!
Maclaurin series
eˣ = Σxᵏ/k!, sin x = x − x³/3! + …, cos x = 1 − x²/2! + …, ln(1 + x) = x − x²/2 + …
Lagrange error bound
|Rₙ| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!

Method

  1. Identify the type: arithmetic (constant difference), geometric (constant ratio), a standard series, a power series or a Taylor polynomial.
  2. For sums use Sₙ = n(a₁ + aₙ)/2, Sₙ = a₁(1 − rⁿ)/(1 − r), or S = a₁/(1 − r) when |r| < 1, with a₁ the first term of the sum.
  3. For convergence: n-th term test first, then compare with Σ1/kᵖ or a geometric series, and use the ratio or root test for factorials and k-th powers.
  4. For Taylor polynomials list f(a), f′(a), f″(a), …, divide the k-th derivative by k!, and bound the error with M·|x − a|ⁿ⁺¹/(n + 1)!.

Multivariable calculus

Partial derivatives
fx = ∂f/∂x (y constant), fxy = fyx
Gradient
∇f = (fx, fy), largest slope |∇f|
Directional derivative
Duf = ∇f·u, u = v/|v|
Tangent plane
z = f(a, b) + fx(x − a) + fy(y − b)
Chain rule
dz/dt = fx·dx/dt + fy·dy/dt
Second-derivative test
D = fxxfyy − fxy²: D > 0, fxx > 0 minimum; D > 0, fxx < 0 maximum; D < 0 saddle
Double integral
∬R f dA = ∫ab∫g(x)h(x) f dy dx
Polar coordinates
x = r cos θ, y = r sin θ, dA = r dr dθ

Method

  1. For a partial derivative, treat the other variable as a constant and use the one-variable rules.
  2. For gradient questions compute ∇f = (fx, fy) at the point; use |∇f| for the steepest slope and ∇f·u with a unit vector u for a directional derivative.
  3. For extrema solve fx = 0 and fy = 0 together, then classify every point with D = fxx·fyy − fxy².
  4. For a double integral sketch the region, choose the order (or polar coordinates for discs) so the inner limits are the bounding curves, and integrate inside first.

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

2Practice problems

1.IntegralsMedium
xy02

Evaluate I = ∫02 2x·(x² + 1)1 dx.

f(x) = 2x·(x² + 1)1[0, 2]
I =
2.IntegralsHard
xy1.333y = 4xy = 3x²

The region between the line y = 4x and the parabola y = 3x² is rotated about the x-axis. Find the volume V of the solid.

y = 4xy = 3x²
V =
3.Sequences & seriesMedium
kSn​12345678910S = ?

Find the sum S = Σk=1∞ 1/(k(k + 3)).

ak = 1/(k(k + 3))
S =
4.Sequences & seriesHard

Find the coefficient c₃ of (x − 1)³ in the Taylor series of f(x) = ln x about a = 1.

f(x) = ln xa = 1k = 3
c₃ =
5.Multivariable calculusMedium

z = 3xy³ + 4x³ + 2y³ + 3xy with x = −2t + 2 and y = 2t² + 1. Use the chain rule to find dz/dt at t = −1.

z = 3xy³ + 4x³ + 2y³ + 3xyx = −2t + 2y = 2t² + 1t = −1
dz/dt =
6.Multivariable calculusHard
xy−202−202ABC

The marked points are the critical points of f(x, y) = x⁴ + y⁴ − 16xy. Click the saddle point.

f(x, y) = x⁴ + y⁴ − 16xy
  1. 1A (−2, −2)
  2. 2B (0, 0)
  3. 3C (2, 2)
7.Differential equationsMedium
t (min)T (°C)17Ta​T = ?

A forged steel part at 400 °C is left to cool in a workshop at 30 °C. It follows Newton's law of cooling, dT/dt = −k·(T − Tₐ). With k = 0.01 min⁻¹, find its temperature T after 17 min.

T0 = 400 °CTa = 30 °Ck = 0.01 min⁻¹t = 17 min
T = °C
8.Differential equationsHard
t (min)m (kg)t = ?38 kg

A tank holds 1000 L of water in which 10 kg of salt is dissolved. Brine with 0.05 kg of salt per litre flows in at 4 L/min, and the well-mixed solution flows out at the same rate. After how many minutes t does the tank contain 38 kg of salt?

V = 1000 Lm0 = 10 kgc = 0.05 kg/Lr = 4 L/min
t = min

3Solutions

1.Integrals

Answer: I = 12

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Substitution

u = x² + 1, du = 2x dx
I = ∫15 u1 du

Integrate and evaluate

I = [u2/2]15 = (25 − 1)/2 = 12

Answer

I = 12
2.Integrals

Answer: V = 15.89

Volumes of revolution: rotating the region under y = f(x) from x = a to x = b about the x-axis makes a solid whose cross-section at x is a disc of radius f(x). Adding the discs gives V = π∫ₐᵇ f(x)² dx. When the region lies between an outer curve R(x) and an inner curve r(x), each slice is a washer: V = π∫ₐᵇ (R(x)² − r(x)²) dx. Square the radii before you subtract them.

Intersection points

4x = 3x² → x = 0, x = 1.333

Washer method

V = π∫₀1.333 ((4x)² − (3x²)²) dx

Integrate

V = π(16·1.333³/3 − 9·1.333⁵/5) = π·5.057 = 15.89

Answer

V = 15.89
3.Sequences & series

Answer: S = 0.6111

Convergence: if the terms do not tend to 0 the series diverges (n-th term test). Σ1/kᵖ converges only for p > 1, and Σrᵏ only for |r| < 1. Compare a series with one of these when its terms behave like them for large k. Ratio test: L = lim |ak+1/ak|; root test: L = lim |ak|1/k. L < 1 converges, L > 1 diverges, L = 1 decides nothing. A power series Σck(x − x₀)ᵏ converges for |x − x₀| < R with R = lim |ck/ck+1|; an alternating series with terms decreasing to 0 converges.

Partial fractions

1/(k(k + 3)) = (1/3)·(1/k − 1/(k + 3))

Cancel

S = (1/3)·(1 + 1/2 + 1/3) = 0.6111

Answer

S = 0.6111
4.Sequences & series

Answer: c₃ = 0.3333

Taylor polynomials: near x = a a smooth function is approximated by Pₙ(x) = f(a) + f′(a)(x − a) + f″(a)(x − a)²/2! + … + f⁽ⁿ⁾(a)(x − a)ⁿ/n!; for a = 0 this is the Maclaurin polynomial. Standard series: eˣ = Σxᵏ/k!, sin x = x − x³/3! + x⁵/5! − …, cos x = 1 − x²/2! + x⁴/4! − …, ln(1 + x) = x − x²/2 + x³/3 − …, 1/(1 − x) = Σxᵏ. Lagrange error bound: |f(x) − Pₙ(x)| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!, where M is the largest value of |f⁽ⁿ⁺¹⁾| between a and x.

Derivative f⁽³⁾

f⁽³⁾(x) = 2/x³

Coefficient

c₃ = f⁽³⁾(1)/3! = 2/(1³·6) = 0.3333
c₃ = 0.3333

Answer

c₃ = 0.3333
5.Multivariable calculus

Answer: dz/dt = −2124

Gradient: ∇f = (fx, fy) points in the direction of steepest ascent, and |∇f| is the largest rate of change. The directional derivative along a direction v is Duf = ∇f·u with the unit vector u = v/|v|. The tangent plane at (a, b) is z = f(a, b) + fx(a, b)(x − a) + fy(a, b)(y − b); it gives the linear approximation of f near that point. Chain rule: dz/dt = fx·dx/dt + fy·dy/dt.

Point and rates

x(−1) = 4, y(−1) = 3
dx/dt = −2, dy/dt = 4t = −4

Partial derivatives

fx = 3y³ + 12x² + 3y = 282
fy = 9xy² + 6y² + 3x = 390

Chain rule

dz/dt = 282·(−2) + 390·(−4) = −2124

Answer

dz/dt = −2124
6.Multivariable calculus

Answer: B (0, 0)

Critical points and double integrals: a critical point has fx = fy = 0. Second-derivative test with D = fxxfyy − fxy²: D > 0 and fxx > 0 is a local minimum, D > 0 and fxx < 0 a local maximum, D < 0 a saddle point, and D = 0 decides nothing. For a double integral over a general region, let the inner limits be the curves that bound the region; for discs and sectors use polar coordinates, x = r cos θ, y = r sin θ and dA = r dr dθ (do not forget the factor r).

Critical points

Solve fx = 0 and fy = 0 together.

fx = 4x³ − 16y = 0
fy = 4y³ − 16x = 0
(0, 0), (2, 2), (−2, −2)

Second-derivative test

(0, 0): fxx = 0, fyy = 0, fxy = −16, D = −256 → saddle point
(2, 2): fxx = 48, fyy = 48, fxy = −16, D = 2048 → local minimum
(−2, −2): fxx = 48, fyy = 48, fxy = −16, D = 2048 → local minimum

The point

B (0, 0): saddle point

Answer

B (0, 0)
7.Differential equations

Answer: T = 342.2 °C

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Solution of the cooling law

T(t) = 30 + 370·e−0.01t

Substitute t

T(17) = 30 + 370·0.8437 = 342.2 °C

Answer

T = 342.2 °C
8.Differential equations

Answer: t = 301 min

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Result

m(t) = 50 + (−40)·e−t/250

Solve for t

e−t/250 = (50 − 38)/(50 − 10) = 0.3
t = 250·ln(3.333) = 301 min

Answer

t = 301 min

ExamProblems · examproblems.com/courses/calculus-2