Calculus 2: cram pack

Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Sequences & series

Arithmetic sequence
aₙ = a₁ + (n − 1)d, Sₙ = n(a₁ + aₙ)/2
Geometric sequence
aₙ = a₁rⁿ⁻¹, Sₙ = a₁(1 − rⁿ)/(1 − r)
Infinite geometric series
S = a₁/(1 − r), |r| < 1
p-series
Σ1/kᵖ converges only for p > 1
Ratio test
L = lim |ak+1/ak|: L < 1 converges, L > 1 diverges
Radius of convergence
R = lim |ck/ck+1|
Taylor polynomial
Pₙ(x) = Σ f⁽ᵏ⁾(a)(x − a)ᵏ/k!
Maclaurin series
eˣ = Σxᵏ/k!, sin x = x − x³/3! + …, cos x = 1 − x²/2! + …, ln(1 + x) = x − x²/2 + …
Lagrange error bound
|Rₙ| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!

Method

  1. Identify the type: arithmetic (constant difference), geometric (constant ratio), a standard series, a power series or a Taylor polynomial.
  2. For sums use Sₙ = n(a₁ + aₙ)/2, Sₙ = a₁(1 − rⁿ)/(1 − r), or S = a₁/(1 − r) when |r| < 1, with a₁ the first term of the sum.
  3. For convergence: n-th term test first, then compare with Σ1/kᵖ or a geometric series, and use the ratio or root test for factorials and k-th powers.
  4. For Taylor polynomials list f(a), f′(a), f″(a), …, divide the k-th derivative by k!, and bound the error with M·|x − a|ⁿ⁺¹/(n + 1)!.

Multivariable calculus

Partial derivatives
fx = ∂f/∂x (y constant), fxy = fyx
Gradient
∇f = (fx, fy), largest slope |∇f|
Directional derivative
Duf = ∇f·u, u = v/|v|
Tangent plane
z = f(a, b) + fx(x − a) + fy(y − b)
Chain rule
dz/dt = fx·dx/dt + fy·dy/dt
Second-derivative test
D = fxxfyy − fxy²: D > 0, fxx > 0 minimum; D > 0, fxx < 0 maximum; D < 0 saddle
Double integral
∬R f dA = ∫ab∫g(x)h(x) f dy dx
Polar coordinates
x = r cos θ, y = r sin θ, dA = r dr dθ

Method

  1. For a partial derivative, treat the other variable as a constant and use the one-variable rules.
  2. For gradient questions compute ∇f = (fx, fy) at the point; use |∇f| for the steepest slope and ∇f·u with a unit vector u for a directional derivative.
  3. For extrema solve fx = 0 and fy = 0 together, then classify every point with D = fxx·fyy − fxy².
  4. For a double integral sketch the region, choose the order (or polar coordinates for discs) so the inner limits are the bounding curves, and integrate inside first.

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

2Practice problems

1.IntegralsMedium
xy12

Evaluate I = ∫12 1/x dx.

f(x) = 1/x[1, 2]
I =
2.IntegralsHard
xyy = 2x2​y = 4x

Find the area A of the region enclosed by y = 2x2 and y = 4x.

y = 2x2y = 4x
A =
3.Sequences & seriesMedium
k|aₖ₊₁/aₖ|123456789101112

Apply the ratio test to Σk=1∞ 2ᵏ·k!/kᵏ. Find L = lim |ak+1/ak|.

ak = 2ᵏ·k!/kᵏ
L =
4.Sequences & seriesHard

Find the coefficient c₂ of (x − 1)² in the Taylor series of f(x) = √x about a = 1.

f(x) = √xa = 1k = 2
c₂ =
5.Multivariable calculusMedium
xy32∇fP

For f(x, y) = 4x³y² − 2x² + 5y² + 2xy, find the maximum rate of change of f at the point (3, 2), that is |∇f|.

f(x, y) = 4x³y² − 2x² + 5y² + 2xyP = (3, 2)
|∇f| =
6.Multivariable calculusHard
xy−202−2024(−1, 3)

Find the critical points of f(x, y) = −2x² − 2xy − y² + 2x + 4y + 5, classify them, and give the value fmax of f at its local maximum.

f(x, y) = −2x² − 2xy − y² + 2x + 4y + 5
fmax =
7.Differential equationsMedium
t (min)T (°C)42Ta​260 °C110 °C

A forged steel part at 380 °C is left to cool in a workshop at 29 °C. After 42 min its temperature is 260 °C. It follows Newton's law of cooling, dT/dt = −k·(T − Tₐ). How long after the start, t, does it take to reach 110 °C?

T0 = 380 °CTa = 29 °CT(42) = 260 °CT = 110 °C
t = min
8.Differential equationsHard
ty2y(2) = ?

Solve y′ + 0.5y = 4e−t with y(0) = 1. Find y(2).

y′ + 0.5y = 4e−ty(0) = 1
y(2) =

3Solutions

1.Integrals

Answer: I = 0.6931

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Antiderivative

F(x) = ln x

Evaluate at the limits

I = (ln 2 − ln 1) = ln 2 = 0.6931

Answer

I = 0.6931
2.Integrals

Answer: A = 2.667

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Intersection points

2x2 = 4x → x = 0, x = 2

Integrate upper minus lower

A = [2x2 − 0.6667x3]02 = 2.667

Answer

A = 2.667
3.Sequences & series

Answer: L = 0.7358

Convergence: if the terms do not tend to 0 the series diverges (n-th term test). Σ1/kᵖ converges only for p > 1, and Σrᵏ only for |r| < 1. Compare a series with one of these when its terms behave like them for large k. Ratio test: L = lim |ak+1/ak|; root test: L = lim |ak|1/k. L < 1 converges, L > 1 diverges, L = 1 decides nothing. A power series Σck(x − x₀)ᵏ converges for |x − x₀| < R with R = lim |ck/ck+1|; an alternating series with terms decreasing to 0 converges.

Ratio of consecutive terms

|ak+1/ak| = 2·(k/(k + 1))ᵏ = 2/(1 + 1/k)ᵏ → 2/e

Conclusion

L = 0.7358 < 1

Answer

L = 0.7358

L < 1, so the series converges.

4.Sequences & series

Answer: c₂ = −0.125

Taylor polynomials: near x = a a smooth function is approximated by Pₙ(x) = f(a) + f′(a)(x − a) + f″(a)(x − a)²/2! + … + f⁽ⁿ⁾(a)(x − a)ⁿ/n!; for a = 0 this is the Maclaurin polynomial. Standard series: eˣ = Σxᵏ/k!, sin x = x − x³/3! + x⁵/5! − …, cos x = 1 − x²/2! + x⁴/4! − …, ln(1 + x) = x − x²/2 + x³/3 − …, 1/(1 − x) = Σxᵏ. Lagrange error bound: |f(x) − Pₙ(x)| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!, where M is the largest value of |f⁽ⁿ⁺¹⁾| between a and x.

Derivative f⁽²⁾

f⁽²⁾(x) = −0.25·x1/2 − 2

Coefficient

c₂ = −0.25·11/2 − 2/2! = −0.125
c₂ = −0.125

Answer

c₂ = −0.125
5.Multivariable calculus

Answer: |∇f| = 624.1

Gradient: ∇f = (fx, fy) points in the direction of steepest ascent, and |∇f| is the largest rate of change. The directional derivative along a direction v is Duf = ∇f·u with the unit vector u = v/|v|. The tangent plane at (a, b) is z = f(a, b) + fx(a, b)(x − a) + fy(a, b)(y − b); it gives the linear approximation of f near that point. Chain rule: dz/dt = fx·dx/dt + fy·dy/dt.

Partial derivatives

fx = 12x²y² − 4x + 2y → fx(3, 2) = 424
fy = 8x³y + 10y + 2x → fy(3, 2) = 458

Length of the gradient

|∇f| = √(424² + 458²) = 624.1

Answer

|∇f| = 624.1
6.Multivariable calculus

Answer: fmax = 10

Critical points and double integrals: a critical point has fx = fy = 0. Second-derivative test with D = fxxfyy − fxy²: D > 0 and fxx > 0 is a local minimum, D > 0 and fxx < 0 a local maximum, D < 0 a saddle point, and D = 0 decides nothing. For a double integral over a general region, let the inner limits be the curves that bound the region; for discs and sectors use polar coordinates, x = r cos θ, y = r sin θ and dA = r dr dθ (do not forget the factor r).

Critical points

Solve fx = 0 and fy = 0 together.

fx = −4x − 2y + 2 = 0
fy = −2x − 2y + 4 = 0
(−1, 3)

Second-derivative test

(−1, 3): fxx = −4, fyy = −2, fxy = −2, D = 4 → local maximum

Value at the extremum

f(−1, 3) = 10

Answer

fmax = 10
7.Differential equations

Answer: t = 147.2 min

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Cooling constant

k = ln(351/231)/42 = 0.009961 min⁻¹

Time to reach the target

t = ln(351/81)/0.009961 = 147.2 min

Answer

t = 147.2 min
8.Differential equations

Answer: y(2) = 2.228

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Integrating factor

μ = e0.5t
(e0.5ty)′ = 4e−0.5t

General solution

y = 4/(−0.5)·e−t + C·e−0.5t = −8·e−t + C·e−0.5t

Initial condition

1 = −8 + C → C = 9

Evaluate

y(2) = −8·0.1353 + 9·0.3679 = 2.228

Answer

y(2) = 2.228

ExamProblems · examproblems.com/courses/calculus-2