Calculus 2: cram pack

Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Sequences & series

Arithmetic sequence
aₙ = a₁ + (n − 1)d, Sₙ = n(a₁ + aₙ)/2
Geometric sequence
aₙ = a₁rⁿ⁻¹, Sₙ = a₁(1 − rⁿ)/(1 − r)
Infinite geometric series
S = a₁/(1 − r), |r| < 1
p-series
Σ1/kᵖ converges only for p > 1
Ratio test
L = lim |ak+1/ak|: L < 1 converges, L > 1 diverges
Radius of convergence
R = lim |ck/ck+1|
Taylor polynomial
Pₙ(x) = Σ f⁽ᵏ⁾(a)(x − a)ᵏ/k!
Maclaurin series
eˣ = Σxᵏ/k!, sin x = x − x³/3! + …, cos x = 1 − x²/2! + …, ln(1 + x) = x − x²/2 + …
Lagrange error bound
|Rₙ| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!

Method

  1. Identify the type: arithmetic (constant difference), geometric (constant ratio), a standard series, a power series or a Taylor polynomial.
  2. For sums use Sₙ = n(a₁ + aₙ)/2, Sₙ = a₁(1 − rⁿ)/(1 − r), or S = a₁/(1 − r) when |r| < 1, with a₁ the first term of the sum.
  3. For convergence: n-th term test first, then compare with Σ1/kᵖ or a geometric series, and use the ratio or root test for factorials and k-th powers.
  4. For Taylor polynomials list f(a), f′(a), f″(a), …, divide the k-th derivative by k!, and bound the error with M·|x − a|ⁿ⁺¹/(n + 1)!.

Multivariable calculus

Partial derivatives
fx = ∂f/∂x (y constant), fxy = fyx
Gradient
∇f = (fx, fy), largest slope |∇f|
Directional derivative
Duf = ∇f·u, u = v/|v|
Tangent plane
z = f(a, b) + fx(x − a) + fy(y − b)
Chain rule
dz/dt = fx·dx/dt + fy·dy/dt
Second-derivative test
D = fxxfyy − fxy²: D > 0, fxx > 0 minimum; D > 0, fxx < 0 maximum; D < 0 saddle
Double integral
∬R f dA = ∫ab∫g(x)h(x) f dy dx
Polar coordinates
x = r cos θ, y = r sin θ, dA = r dr dθ

Method

  1. For a partial derivative, treat the other variable as a constant and use the one-variable rules.
  2. For gradient questions compute ∇f = (fx, fy) at the point; use |∇f| for the steepest slope and ∇f·u with a unit vector u for a directional derivative.
  3. For extrema solve fx = 0 and fy = 0 together, then classify every point with D = fxx·fyy − fxy².
  4. For a double integral sketch the region, choose the order (or polar coordinates for discs) so the inner limits are the bounding curves, and integrate inside first.

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

2Practice problems

1.IntegralsMedium
xyπ/2y = x·cos x

Evaluate I = ∫₀π/2 x·cos x dx (x in radians).

∫₀π/2 x·cos x dx
I =
2.IntegralsHard
xy−33

Find the area A of the region between the parabola y = 9 − x² and the x-axis.

y = 9 − x²
A =
3.Sequences & seriesMedium
AΣ (7/4)ᵏk = 1 … ∞BΣ (−1)ᵏ/√kk = 1 … ∞CΣ (k + 3)/k²k = 1 … ∞DΣ k!/10ᵏk = 1 … ∞

Exactly one of the four series converges. Click it.

A: Σ (7/4)ᵏB: Σ (−1)ᵏ/√kC: Σ (k + 3)/k²D: Σ k!/10ᵏ
  1. 1A: Σ (7/4)ᵏ
  2. 2B: Σ (−1)ᵏ/√k
  3. 3C: Σ (k + 3)/k²
  4. 4D: Σ k!/10ᵏ
4.Sequences & seriesHard

f(x) = ln(1 + x) is approximated by its Maclaurin polynomial of degree 4 at x = 0.5. Use the Lagrange error bound M·|x|ⁿ⁺¹/(n + 1)! with M = 4! = 24 to find the largest possible error |R₄|.

f(x) = ln(1 + x)n = 4x = 0.5M = 24
|R₄| =
5.Multivariable calculusMedium

z = −2x²y − 4x² − 4y² + xy with x = −t − 2 and y = −2t² + 1. Use the chain rule to find dz/dt at t = 2.

z = −2x²y − 4x² − 4y² + xyx = −t − 2y = −2t² + 1t = 2
dz/dt =
6.Multivariable calculusHard
xy−202−4−202AB

The marked points are the critical points of f(x, y) = x³ − 3x + y² + 6y. Click the saddle point.

f(x, y) = x³ − 3x + y² + 6y
  1. 1A (−1, −3)
  2. 2B (1, −3)
7.Differential equationsMedium
t (min)T (°C)27Ta​25 °C

A can of soda at 4 °C is taken out of the fridge into a room at 29 °C. After 27 min its temperature is 25 °C. It follows Newton's law of cooling, dT/dt = −k·(T − Tₐ). Find the constant k in min⁻¹.

T0 = 4 °CTa = 29 °CT(27) = 25 °C
k = min⁻¹
8.Differential equationsHard
tyy(0) = 3y(0.25) = ?

Solve y″ + 4y′ + 29y = 0 with y(0) = 3 and y′(0) = 0 (released from rest). Find y(0.25); angles in radians.

y″ + 4y′ + 29y = 0y(0) = 3y′(0) = 0
y(0.25) =

3Solutions

1.Integrals

Answer: I = 0.5708

Integration by parts: ∫u·dv = u·v − ∫v·du, from the product rule. Choose u as the factor that gets simpler when you differentiate it (a power of x, or ln x), and dv as the factor you can integrate (eˣ, sin x, cos x, or x when u = ln x). For a definite integral, evaluate u·v at both limits: ∫ₐᵇ u dv = [u·v]ₐᵇ − ∫ₐᵇ v du. A factor x² needs two rounds.

Choose u and dv

u = x, du = dx; dv = cos x dx, v = sin x

Antiderivative

∫x cos x dx = x sin x − ∫sin x dx = x sin x + cos x

Limits

(π/2·sin π/2 + cos π/2) − (0 + 1) = 0.5708

Answer

I = 0.5708
2.Integrals

Answer: A = 36

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Zeros

9 − x² = 0 → x = ±3

Integrate

A = [9x − x³/3]−33 = 18 − (−18) = 36

Answer

A = 36
3.Sequences & series

Answer: B: Σ (−1)ᵏ/√k

Convergence: if the terms do not tend to 0 the series diverges (n-th term test). Σ1/kᵖ converges only for p > 1, and Σrᵏ only for |r| < 1. Compare a series with one of these when its terms behave like them for large k. Ratio test: L = lim |ak+1/ak|; root test: L = lim |ak|1/k. L < 1 converges, L > 1 diverges, L = 1 decides nothing. A power series Σck(x − x₀)ᵏ converges for |x − x₀| < R with R = lim |ck/ck+1|; an alternating series with terms decreasing to 0 converges.

Test each series

A: Σ (7/4)ᵏ → Geometric with r = 7/4 > 1: the terms grow, so it diverges.
B: Σ (−1)ᵏ/√k → Alternating, with 1/√k decreasing to 0: converges (conditionally).
C: Σ (k + 3)/k² → Behaves like 1/k for large k: diverges by comparison with the harmonic series.
D: Σ k!/10ᵏ → Ratio test: L = lim (k + 1)/10 = ∞, diverges.

The answer

B: Σ (−1)ᵏ/√k

Answer

B: Σ (−1)ᵏ/√k
4.Sequences & series

Answer: |R₄| = 0.00625

Taylor polynomials: near x = a a smooth function is approximated by Pₙ(x) = f(a) + f′(a)(x − a) + f″(a)(x − a)²/2! + … + f⁽ⁿ⁾(a)(x − a)ⁿ/n!; for a = 0 this is the Maclaurin polynomial. Standard series: eˣ = Σxᵏ/k!, sin x = x − x³/3! + x⁵/5! − …, cos x = 1 − x²/2! + x⁴/4! − …, ln(1 + x) = x − x²/2 + x³/3 − …, 1/(1 − x) = Σxᵏ. Lagrange error bound: |f(x) − Pₙ(x)| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!, where M is the largest value of |f⁽ⁿ⁺¹⁾| between a and x.

Bound on the derivative

M = 4! = 24

Lagrange bound

|R₄| ≤ 24·0.5⁵/5! = 0.00625

Answer

|R₄| = 0.00625

The true error is smaller: |f(0.5) − P₄(0.5)| = 0.004423.

5.Multivariable calculus

Answer: dz/dt = −73

Gradient: ∇f = (fx, fy) points in the direction of steepest ascent, and |∇f| is the largest rate of change. The directional derivative along a direction v is Duf = ∇f·u with the unit vector u = v/|v|. The tangent plane at (a, b) is z = f(a, b) + fx(a, b)(x − a) + fy(a, b)(y − b); it gives the linear approximation of f near that point. Chain rule: dz/dt = fx·dx/dt + fy·dy/dt.

Point and rates

x(2) = −4, y(2) = −7
dx/dt = −1, dy/dt = −4t = −8

Partial derivatives

fx = −4xy − 8x + y = −87
fy = −2x² − 8y + x = 20

Chain rule

dz/dt = (−87)·(−1) + 20·(−8) = −73

Answer

dz/dt = −73
6.Multivariable calculus

Answer: A (−1, −3)

Critical points and double integrals: a critical point has fx = fy = 0. Second-derivative test with D = fxxfyy − fxy²: D > 0 and fxx > 0 is a local minimum, D > 0 and fxx < 0 a local maximum, D < 0 a saddle point, and D = 0 decides nothing. For a double integral over a general region, let the inner limits be the curves that bound the region; for discs and sectors use polar coordinates, x = r cos θ, y = r sin θ and dA = r dr dθ (do not forget the factor r).

Critical points

Solve fx = 0 and fy = 0 together.

fx = (3x² − 3) = 0
fy = (2y + 6) = 0
(1, −3), (−1, −3)

Second-derivative test

(1, −3): fxx = 6, fyy = 2, fxy = 0, D = 12 → local minimum
(−1, −3): fxx = −6, fyy = 2, fxy = 0, D = −12 → saddle point

The point

A (−1, −3): saddle point

Answer

A (−1, −3)
7.Differential equations

Answer: k = 0.06787 min⁻¹

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Ratio of temperature differences

e−27k = -4/-25

Solve for k

k = ln(-25/-4)/27 = 0.06787 min⁻¹

Answer

k = 0.06787 min⁻¹
8.Differential equations

Answer: y(0.25) = 1.264

Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.

Complex roots

r = −2 ± 5j

Constants

A = 3, B = 2·3/5 = 1.2

Evaluate

y(0.25) = e−0.5(3·cos 1.25 + 1.2·sin 1.25) = 1.264

Answer

y(0.25) = 1.264

ExamProblems · examproblems.com/courses/calculus-2