Calculus 2: cram pack

Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Sequences & series

Arithmetic sequence
aₙ = a₁ + (n − 1)d, Sₙ = n(a₁ + aₙ)/2
Geometric sequence
aₙ = a₁rⁿ⁻¹, Sₙ = a₁(1 − rⁿ)/(1 − r)
Infinite geometric series
S = a₁/(1 − r), |r| < 1
p-series
Σ1/kᵖ converges only for p > 1
Ratio test
L = lim |ak+1/ak|: L < 1 converges, L > 1 diverges
Radius of convergence
R = lim |ck/ck+1|
Taylor polynomial
Pₙ(x) = Σ f⁽ᵏ⁾(a)(x − a)ᵏ/k!
Maclaurin series
eˣ = Σxᵏ/k!, sin x = x − x³/3! + …, cos x = 1 − x²/2! + …, ln(1 + x) = x − x²/2 + …
Lagrange error bound
|Rₙ| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!

Method

  1. Identify the type: arithmetic (constant difference), geometric (constant ratio), a standard series, a power series or a Taylor polynomial.
  2. For sums use Sₙ = n(a₁ + aₙ)/2, Sₙ = a₁(1 − rⁿ)/(1 − r), or S = a₁/(1 − r) when |r| < 1, with a₁ the first term of the sum.
  3. For convergence: n-th term test first, then compare with Σ1/kᵖ or a geometric series, and use the ratio or root test for factorials and k-th powers.
  4. For Taylor polynomials list f(a), f′(a), f″(a), …, divide the k-th derivative by k!, and bound the error with M·|x − a|ⁿ⁺¹/(n + 1)!.

Multivariable calculus

Partial derivatives
fx = ∂f/∂x (y constant), fxy = fyx
Gradient
∇f = (fx, fy), largest slope |∇f|
Directional derivative
Duf = ∇f·u, u = v/|v|
Tangent plane
z = f(a, b) + fx(x − a) + fy(y − b)
Chain rule
dz/dt = fx·dx/dt + fy·dy/dt
Second-derivative test
D = fxxfyy − fxy²: D > 0, fxx > 0 minimum; D > 0, fxx < 0 maximum; D < 0 saddle
Double integral
∬R f dA = ∫ab∫g(x)h(x) f dy dx
Polar coordinates
x = r cos θ, y = r sin θ, dA = r dr dθ

Method

  1. For a partial derivative, treat the other variable as a constant and use the one-variable rules.
  2. For gradient questions compute ∇f = (fx, fy) at the point; use |∇f| for the steepest slope and ∇f·u with a unit vector u for a directional derivative.
  3. For extrema solve fx = 0 and fy = 0 together, then classify every point with D = fxx·fyy − fxy².
  4. For a double integral sketch the region, choose the order (or polar coordinates for discs) so the inner limits are the bounding curves, and integrate inside first.

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

2Practice problems

1.IntegralsMedium
xy16y = x ln x

Evaluate I = ∫₁6 x·ln x dx.

∫₁6 x ln x dx
I =
2.IntegralsHard
xyy = x2​y = 2x

Find the area A of the region enclosed by y = x2 and y = 2x.

y = x2y = 2x
A =
3.Sequences & seriesMedium
AΣ ln k / kk = 1 … ∞BΣ 1/√kk = 1 … ∞CΣ 5ᵏ/k!k = 1 … ∞DΣ k!/2ᵏk = 1 … ∞

Exactly one of the four series converges. Click it.

A: Σ ln k / kB: Σ 1/√kC: Σ 5ᵏ/k!D: Σ k!/2ᵏ
  1. 1A: Σ ln k / k
  2. 2B: Σ 1/√k
  3. 3C: Σ 5ᵏ/k!
  4. 4D: Σ k!/2ᵏ
4.Sequences & seriesHard
xyfP₂0.2

Use the Maclaurin polynomial of degree 2 of f(x) = ln(1 + 2x) to approximate f(0.2). Give P₂(0.2).

f(x) = ln(1 + 2x)n = 2x = 0.2
P₂(0.2) =
5.Multivariable calculusMedium
xy20.5∇fP

For f(x, y) = 3 sin(2x − y), find the direction of steepest ascent at (2, 0.5) as the angle θ from the positive x-axis, in degrees between −180° and 180°.

f(x, y) = 3 sin(2x − y)P = (2, 0.5)
θ = °
6.Multivariable calculusHard
xy05−2024(0, 0)(3, 3)

f(x, y) = x³ + y³ − 9xy has a critical point at (3, 3). Compute the discriminant D = fxxfyy − fxy² there.

f(x, y) = x³ + y³ − 9xyP = (3, 3)
D =
7.Differential equationsMedium
t (min)T (°C)29Ta​25 °C

A cup of coffee at 87 °C is left in a room at 18 °C. After 29 min its temperature is 25 °C. It follows Newton's law of cooling, dT/dt = −k·(T − Tₐ). Find the constant k in min⁻¹.

T0 = 87 °CTa = 18 °CT(29) = 25 °C
k = min⁻¹
8.Differential equationsHard
tyy(0) = 3y(0.75) = ?

Solve y″ + 2y′ + 5y = 0 with y(0) = 3 and y′(0) = 0 (released from rest). Find y(0.75); angles in radians.

y″ + 2y′ + 5y = 0y(0) = 3y′(0) = 0
y(0.75) =

3Solutions

1.Integrals

Answer: I = 23.5

Integration by parts: ∫u·dv = u·v − ∫v·du, from the product rule. Choose u as the factor that gets simpler when you differentiate it (a power of x, or ln x), and dv as the factor you can integrate (eˣ, sin x, cos x, or x when u = ln x). For a definite integral, evaluate u·v at both limits: ∫ₐᵇ u dv = [u·v]ₐᵇ − ∫ₐᵇ v du. A factor x² needs two rounds.

Choose u and dv

u = ln x, du = dx/x; dv = x dx, v = x²/2

Antiderivative

∫x ln x dx = (x²/2)ln x − ∫(x/2) dx = (x²/2)ln x − x²/4

Limits

(18·ln 6 − 9) − (0 − 0.25) = 23.5

Answer

I = 23.5
2.Integrals

Answer: A = 1.333

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Intersection points

x2 = 2x → x = 0, x = 2

Integrate upper minus lower

A = [x2 − 0.3333x3]02 = 1.333

Answer

A = 1.333
3.Sequences & series

Answer: C: Σ 5ᵏ/k!

Convergence: if the terms do not tend to 0 the series diverges (n-th term test). Σ1/kᵖ converges only for p > 1, and Σrᵏ only for |r| < 1. Compare a series with one of these when its terms behave like them for large k. Ratio test: L = lim |ak+1/ak|; root test: L = lim |ak|1/k. L < 1 converges, L > 1 diverges, L = 1 decides nothing. A power series Σck(x − x₀)ᵏ converges for |x − x₀| < R with R = lim |ck/ck+1|; an alternating series with terms decreasing to 0 converges.

Test each series

A: Σ ln k / k → Larger than 1/k for k ≥ 3: diverges by comparison with the harmonic series.
B: Σ 1/√k → p-series with p = 1/2 ≤ 1: diverges.
C: Σ 5ᵏ/k! → Ratio test: L = lim 5/(k + 1) = 0 < 1, converges.
D: Σ k!/2ᵏ → Ratio test: L = lim (k + 1)/2 = ∞, diverges.

The answer

C: Σ 5ᵏ/k!

Answer

C: Σ 5ᵏ/k!
4.Sequences & series

Answer: P₂(0.2) = 0.32

Taylor polynomials: near x = a a smooth function is approximated by Pₙ(x) = f(a) + f′(a)(x − a) + f″(a)(x − a)²/2! + … + f⁽ⁿ⁾(a)(x − a)ⁿ/n!; for a = 0 this is the Maclaurin polynomial. Standard series: eˣ = Σxᵏ/k!, sin x = x − x³/3! + x⁵/5! − …, cos x = 1 − x²/2! + x⁴/4! − …, ln(1 + x) = x − x²/2 + x³/3 − …, 1/(1 − x) = Σxᵏ. Lagrange error bound: |f(x) − Pₙ(x)| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!, where M is the largest value of |f⁽ⁿ⁺¹⁾| between a and x.

Maclaurin polynomial

P₂(x) = 2x − 2x²

Substitute

P₂(0.2) = 0.4 − 0.08 = 0.32

Answer

P₂(0.2) = 0.32

The exact value is f(0.2) = 0.336472; the error 0.0164722 shrinks when you take more terms or a point closer to 0.

5.Multivariable calculus

Answer: θ = 153.4 °

Gradient: ∇f = (fx, fy) points in the direction of steepest ascent, and |∇f| is the largest rate of change. The directional derivative along a direction v is Duf = ∇f·u with the unit vector u = v/|v|. The tangent plane at (a, b) is z = f(a, b) + fx(a, b)(x − a) + fy(a, b)(y − b); it gives the linear approximation of f near that point. Chain rule: dz/dt = fx·dx/dt + fy·dy/dt.

Partial derivatives

fx = 6 cos(2x − y) → fx(2, 0.5) = −5.619
fy = −3 cos(2x − y) → fy(2, 0.5) = 2.809

Direction

θ = atan2(2.809, −5.619) = 153.4°

Answer

θ = 153.4°
6.Multivariable calculus

Answer: D = 243

Critical points and double integrals: a critical point has fx = fy = 0. Second-derivative test with D = fxxfyy − fxy²: D > 0 and fxx > 0 is a local minimum, D > 0 and fxx < 0 a local maximum, D < 0 a saddle point, and D = 0 decides nothing. For a double integral over a general region, let the inner limits be the curves that bound the region; for discs and sectors use polar coordinates, x = r cos θ, y = r sin θ and dA = r dr dθ (do not forget the factor r).

Second derivatives

fxx = 18, fyy = 18, fxy = −9

Discriminant

D = 18·18 − (−9)² = 243
→ local minimum

Answer

D = 243
7.Differential equations

Answer: k = 0.0789 min⁻¹

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Ratio of temperature differences

e−29k = 7/69

Solve for k

k = ln(69/7)/29 = 0.0789 min⁻¹

Answer

k = 0.0789 min⁻¹
8.Differential equations

Answer: y(0.75) = 0.807

Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.

Complex roots

r = −1 ± 2j

Constants

A = 3, B = 1·3/2 = 1.5

Evaluate

y(0.75) = e−0.75(3·cos 1.5 + 1.5·sin 1.5) = 0.807

Answer

y(0.75) = 0.807

ExamProblems · examproblems.com/courses/calculus-2