Calculus 2: cram pack

Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Sequences & series

Arithmetic sequence
aₙ = a₁ + (n − 1)d, Sₙ = n(a₁ + aₙ)/2
Geometric sequence
aₙ = a₁rⁿ⁻¹, Sₙ = a₁(1 − rⁿ)/(1 − r)
Infinite geometric series
S = a₁/(1 − r), |r| < 1
p-series
Σ1/kᵖ converges only for p > 1
Ratio test
L = lim |ak+1/ak|: L < 1 converges, L > 1 diverges
Radius of convergence
R = lim |ck/ck+1|
Taylor polynomial
Pₙ(x) = Σ f⁽ᵏ⁾(a)(x − a)ᵏ/k!
Maclaurin series
eˣ = Σxᵏ/k!, sin x = x − x³/3! + …, cos x = 1 − x²/2! + …, ln(1 + x) = x − x²/2 + …
Lagrange error bound
|Rₙ| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!

Method

  1. Identify the type: arithmetic (constant difference), geometric (constant ratio), a standard series, a power series or a Taylor polynomial.
  2. For sums use Sₙ = n(a₁ + aₙ)/2, Sₙ = a₁(1 − rⁿ)/(1 − r), or S = a₁/(1 − r) when |r| < 1, with a₁ the first term of the sum.
  3. For convergence: n-th term test first, then compare with Σ1/kᵖ or a geometric series, and use the ratio or root test for factorials and k-th powers.
  4. For Taylor polynomials list f(a), f′(a), f″(a), …, divide the k-th derivative by k!, and bound the error with M·|x − a|ⁿ⁺¹/(n + 1)!.

Multivariable calculus

Partial derivatives
fx = ∂f/∂x (y constant), fxy = fyx
Gradient
∇f = (fx, fy), largest slope |∇f|
Directional derivative
Duf = ∇f·u, u = v/|v|
Tangent plane
z = f(a, b) + fx(x − a) + fy(y − b)
Chain rule
dz/dt = fx·dx/dt + fy·dy/dt
Second-derivative test
D = fxxfyy − fxy²: D > 0, fxx > 0 minimum; D > 0, fxx < 0 maximum; D < 0 saddle
Double integral
∬R f dA = ∫ab∫g(x)h(x) f dy dx
Polar coordinates
x = r cos θ, y = r sin θ, dA = r dr dθ

Method

  1. For a partial derivative, treat the other variable as a constant and use the one-variable rules.
  2. For gradient questions compute ∇f = (fx, fy) at the point; use |∇f| for the steepest slope and ∇f·u with a unit vector u for a directional derivative.
  3. For extrema solve fx = 0 and fy = 0 together, then classify every point with D = fxx·fyy − fxy².
  4. For a double integral sketch the region, choose the order (or polar coordinates for discs) so the inner limits are the bounding curves, and integrate inside first.

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

2Practice problems

1.IntegralsMedium
xy2y = 0.5x

The region under y = 0.5x from x = 0 to x = 2 is rotated about the x-axis. Find the volume V of the solid (a cone).

y = 0.5x0 ≤ x ≤ 2
V =
2.IntegralsHard
xyy = x2​y = x

Find the area A of the region enclosed by y = x2 and y = x.

y = x2y = x
A =
3.Sequences & seriesMedium
AΣ (1 + 1/k)ᵏk = 1 … ∞BΣ (3/4)ᵏk = 1 … ∞CΣ k!/2ᵏk = 1 … ∞DΣ (3/2)ᵏk = 1 … ∞

Exactly one of the four series converges. Click it.

A: Σ (1 + 1/k)ᵏB: Σ (3/4)ᵏC: Σ k!/2ᵏD: Σ (3/2)ᵏ
  1. 1A: Σ (1 + 1/k)ᵏ
  2. 2B: Σ (3/4)ᵏ
  3. 3C: Σ k!/2ᵏ
  4. 4D: Σ (3/2)ᵏ
4.Sequences & seriesHard

Recognise the series and find its sum: S = Σk=0∞ (−1)ᵏ/(2k + 1)!.

ak = (−1)ᵏ/(2k + 1)!
S =
5.Multivariable calculusMedium
xy0.52P

The tangent plane to z = 3 ln(x² + 4y²) at the point where (x, y) = (0.5, 2) can be written as z = px + qy + c. Find c.

f(x, y) = 3 ln(x² + 4y²)(a, b) = (0.5, 2)
c =
6.Multivariable calculusHard
xy−505−4−202(3, −1)(−3, −1)

f(x, y) = −x³ + 27x − y² − 2y has a critical point at (−3, −1). Compute the discriminant D = fxxfyy − fxy² there.

f(x, y) = −x³ + 27x − y² − 2yP = (−3, −1)
D =
7.Differential equationsMedium
tyy(0) = 3y(0.5) = ?

Solve y″ + 7y′ + 10y = 0 with y(0) = 3 and y′(0) = -4. Find y(0.5).

y″ + 7y′ + 10y = 0y(0) = 3y′(0) = -4
y(0.5) =
8.Differential equationsHard
tyK = 5ymax​ = ?

A system obeys y″ + y′ + 16.25y = 81.25 for t ≥ 0, starting from rest: y(0) = 0, y′(0) = 0. Find the peak value ymax of its step response.

y″ + y′ + 16.25y = 81.25y(0) = 0y′(0) = 0
ymax =

3Solutions

1.Integrals

Answer: V = 2.094

Volumes of revolution: rotating the region under y = f(x) from x = a to x = b about the x-axis makes a solid whose cross-section at x is a disc of radius f(x). Adding the discs gives V = π∫ₐᵇ f(x)² dx. When the region lies between an outer curve R(x) and an inner curve r(x), each slice is a washer: V = π∫ₐᵇ (R(x)² − r(x)²) dx. Square the radii before you subtract them.

Disc method

V = π∫₀2 0.25x² dx

Integrate

V = π·0.25·2³/3 = 2.094

Answer

V = 2.094

Check: a cone of radius 1 and height 2 has (1/3)πr²h = 2.094.

2.Integrals

Answer: A = 0.1667

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Intersection points

x2 = x → x = 0, x = 1

Integrate upper minus lower

A = [0.5x2 − 0.3333x3]01 = 0.1667

Answer

A = 0.1667
3.Sequences & series

Answer: B: Σ (3/4)ᵏ

Convergence: if the terms do not tend to 0 the series diverges (n-th term test). Σ1/kᵖ converges only for p > 1, and Σrᵏ only for |r| < 1. Compare a series with one of these when its terms behave like them for large k. Ratio test: L = lim |ak+1/ak|; root test: L = lim |ak|1/k. L < 1 converges, L > 1 diverges, L = 1 decides nothing. A power series Σck(x − x₀)ᵏ converges for |x − x₀| < R with R = lim |ck/ck+1|; an alternating series with terms decreasing to 0 converges.

Test each series

A: Σ (1 + 1/k)ᵏ → The terms tend to e, not 0: diverges by the n-th term test.
B: Σ (3/4)ᵏ → Geometric with r = 3/4, |r| < 1: converges.
C: Σ k!/2ᵏ → Ratio test: L = lim (k + 1)/2 = ∞, diverges.
D: Σ (3/2)ᵏ → Geometric with r = 3/2 > 1: the terms grow, so it diverges.

The answer

B: Σ (3/4)ᵏ

Answer

B: Σ (3/4)ᵏ
4.Sequences & series

Answer: S = 0.8415

Taylor polynomials: near x = a a smooth function is approximated by Pₙ(x) = f(a) + f′(a)(x − a) + f″(a)(x − a)²/2! + … + f⁽ⁿ⁾(a)(x − a)ⁿ/n!; for a = 0 this is the Maclaurin polynomial. Standard series: eˣ = Σxᵏ/k!, sin x = x − x³/3! + x⁵/5! − …, cos x = 1 − x²/2! + x⁴/4! − …, ln(1 + x) = x − x²/2 + x³/3 − …, 1/(1 − x) = Σxᵏ. Lagrange error bound: |f(x) − Pₙ(x)| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!, where M is the largest value of |f⁽ⁿ⁺¹⁾| between a and x.

Standard series

Σ (−1)ᵏx2k+1/(2k + 1)! = sin x

Substitute

x = 1
S = sin 1 = 0.8415

Answer

S = 0.8415
5.Multivariable calculus

Answer: c = 2.364

Gradient: ∇f = (fx, fy) points in the direction of steepest ascent, and |∇f| is the largest rate of change. The directional derivative along a direction v is Duf = ∇f·u with the unit vector u = v/|v|. The tangent plane at (a, b) is z = f(a, b) + fx(a, b)(x − a) + fy(a, b)(y − b); it gives the linear approximation of f near that point. Chain rule: dz/dt = fx·dx/dt + fy·dy/dt.

Value and slopes at the point

f(0.5, 2) = 8.364
fx = 6x/(x² + 4y²) → fx(0.5, 2) = 0.1846
fy = 24y/(x² + 4y²) → fy(0.5, 2) = 2.954

Tangent plane

z = 8.364 + 0.1846(x − 0.5) + 2.954(y − 2)
z = 0.1846x + 2.954y + 2.364

Constant term

c = 2.364

Answer

c = 2.364
6.Multivariable calculus

Answer: D = −36

Critical points and double integrals: a critical point has fx = fy = 0. Second-derivative test with D = fxxfyy − fxy²: D > 0 and fxx > 0 is a local minimum, D > 0 and fxx < 0 a local maximum, D < 0 a saddle point, and D = 0 decides nothing. For a double integral over a general region, let the inner limits be the curves that bound the region; for discs and sectors use polar coordinates, x = r cos θ, y = r sin θ and dA = r dr dθ (do not forget the factor r).

Second derivatives

fxx = 18, fyy = −2, fxy = 0

Discriminant

D = 18·(−2) − 0² = −36
→ saddle point

Answer

D = −36
7.Differential equations

Answer: y(0.5) = 1.294

Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.

Characteristic roots

(r + 2)(r + 5) = 0 → r = −2, −5

Constants from the initial values

A + B = 3, −2A − 5B = -4
A = 3.667, B = −0.6667

Evaluate

y(0.5) = 3.667·e−1 + (−0.6667)·e−2.5 = 1.294

Answer

y(0.5) = 1.294
8.Differential equations

Answer: ymax = 8.376

Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.

Steady value and roots

yss = 5, r = −0.5 ± 4j

Constants from the initial values

y(0) = 5 + A = 0 → A = −5
y′(0) = −0.5A + 4B = 0 → B = −0.625

Peak

t = π/4 = 0.7854
ymax = 5·(1 + e−0.5·π/4) = 8.376

Answer

ymax = 8.376

ExamProblems · examproblems.com/courses/calculus-2