Differential Equations: cram pack

Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Derivatives

Power rule
(xⁿ)′ = n·xⁿ⁻¹
Product rule
(uv)′ = u′v + uv′
Quotient rule
(u/v)′ = (u′v − uv′)/v²
Chain rule
f(g(x))′ = f′(g(x))·g′(x)
Common derivatives
(eˣ)′ = eˣ, (ln x)′ = 1/x, (sin x)′ = cos x, (cos x)′ = −sin x

Method

  1. Identify the structure: sum, product, quotient or composition.
  2. Apply the power rule to each power of x.
  3. Use the product, quotient or chain rule where needed.
  4. Simplify, and evaluate at the point if asked.

Numerical methods

Bisection
c = (a + b)/2, width after n steps (b − a)/2ⁿ
Newton–Raphson
xn+1 = xₙ − f(xₙ)/f′(xₙ)
Linear interpolation
y = y₁ + (y₂ − y₁)(x − x₁)/(x₂ − x₁)
Trapezoid rule
T = (h/2)[f₀ + 2f₁ + … + 2fn−1 + fₙ], h = (b − a)/n
Simpson’s rule (n even)
S = (h/3)[f₀ + 4f₁ + 2f₂ + … + 4fn−1 + fₙ]
Trapezoid error bound
|E| ≤ (b − a)h²M/12, M = max|f″|
Euler
yn+1 = yₙ + h·f(tₙ, yₙ)
Heun
yn+1 = yₙ + (h/2)(k₁ + k₂), k₂ = f(tₙ + h, yₙ + hk₁)
RK4
yn+1 = yₙ + (h/6)(k₁ + 2k₂ + 2k₃ + k₄)

Method

  1. For a root: check the sign change for bisection, or compute f and f′ for Newton, and keep six or more digits in a table of iterates.
  2. For a table value: interpolate linearly between the two neighbouring points.
  3. For an integral: find h = (b − a)/n, list f at every node, apply the weights (1, 2, …, 2, 1 for trapezoid; 1, 4, 2, …, 4, 1 for Simpson with even n) and multiply by h/2 or h/3.
  4. For an ODE: step from t₀ with yₙ₊₁ = yₙ + h·f(tₙ, yₙ) (Euler) or the averaged slope (Heun), one row per step, until you reach the requested t.

2Practice problems

1.Differential equationsMedium
tyy(0) = 4y(1.5) = ?

Solve y″ + 7y′ + 10y = 0 with y(0) = 4 and y′(0) = 4. Find y(1.5).

y″ + 7y′ + 10y = 0y(0) = 4y′(0) = 4
y(1.5) =
2.Differential equationsHard
tyK = 5y(1.5) = ?

A system obeys y″ + y′ + 16.25y = 81.25 for t ≥ 0, starting from rest: y(0) = 0, y′(0) = 0. Find y(1.5); angles in radians.

y″ + y′ + 16.25y = 81.25y(0) = 0y′(0) = 0
y(1.5) =
3.IntegralsMedium
xy4y = √(2x)

The region under y = √(2x) from x = 0 to x = 4 is rotated about the x-axis. Find the volume V of the solid (a paraboloid).

y = √(2x)0 ≤ x ≤ 4
V =
4.IntegralsHard
xy3y = x²eˣ

Evaluate I = ∫₀3 x²·eˣ dx.

∫₀3 x²eˣ dx
I =
5.DerivativesMedium
xyx = 0.5

Let f(x) = x3·e2x. Find f′(0.5).

f(x) = x3·e2xx = 0.5
f′(0.5) =
6.DerivativesHard
xyx = 1

The tangent line to f(x) = 0.5x2 + x + 6 at x = 1 crosses the y-axis at y = b. Find b.

f(x) = 0.5x2 + x + 6x = 1
b =
7.Numerical methodsMedium
xy00.511.52

Approximate ∫02 sin(x²) dx with Simpson's rule using n = 4 strips. Give S.

f(x) = sin(x²)[a, b] = [0, 2]n = 4
S =
8.Numerical methodsHard
00.10.20.30.60.8ty(0, 0.5)

Use Euler's method with h = 0.1 for y′ = 1 + sin(ty), y(0) = 0.5 to estimate y3 ≈ y(0.3).

y′ = 1 + sin(ty)y(0) = 0.5h = 0.1
y3 =

3Solutions

1.Differential equations

Answer: y(1.5) = 0.3961

Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.

Characteristic roots

(r + 2)(r + 5) = 0 → r = −2, −5

Constants from the initial values

A + B = 4, −2A − 5B = 4
A = 8, B = −4

Evaluate

y(1.5) = 8·e−3 + (−4)·e−7.5 = 0.3961

Answer

y(1.5) = 0.3961
2.Differential equations

Answer: y(1.5) = 2.815

Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.

Steady value and roots

yss = 5, r = −0.5 ± 4j

Constants from the initial values

y(0) = 5 + A = 0 → A = −5
y′(0) = −0.5A + 4B = 0 → B = −0.625

Evaluate

y(1.5) = 5·(1 − e−0.75(cos 6 + 0.125·sin 6)) = 2.815

Answer

y(1.5) = 2.815
3.Integrals

Answer: V = 50.27

Volumes of revolution: rotating the region under y = f(x) from x = a to x = b about the x-axis makes a solid whose cross-section at x is a disc of radius f(x). Adding the discs gives V = π∫ₐᵇ f(x)² dx. When the region lies between an outer curve R(x) and an inner curve r(x), each slice is a washer: V = π∫ₐᵇ (R(x)² − r(x)²) dx. Square the radii before you subtract them.

Disc method

V = π∫₀4 2x dx

Integrate

V = π·2·4²/2 = 50.27

Answer

V = 50.27
4.Integrals

Answer: I = 98.43

Integration by parts: ∫u·dv = u·v − ∫v·du, from the product rule. Choose u as the factor that gets simpler when you differentiate it (a power of x, or ln x), and dv as the factor you can integrate (eˣ, sin x, cos x, or x when u = ln x). For a definite integral, evaluate u·v at both limits: ∫ₐᵇ u dv = [u·v]ₐᵇ − ∫ₐᵇ v du. A factor x² needs two rounds.

First round

∫x²eˣ dx = x²eˣ − ∫2x eˣ dx

Second round

∫2x eˣ dx = 2x eˣ − 2eˣ
∫x²eˣ dx = eˣ(x² − 2x + 2)

Limits

20.09·(5) − 1·2 = 98.43

Answer

I = 98.43
5.Derivatives

Answer: f′(0.5) = 2.718

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Product rule

f′(x) = u′v + uv′ = e2x·(3x2 + 2·x3)

Substitute

f′(0.5) = 2.718·(0.75 + 0.25) = 2.718

Answer

f′(0.5) = 2.718
6.Derivatives

Answer: b = 5.5

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Point and slope

f(1) = 7.5
f′(x) = x + 1 → f′(1) = 2

Tangent line at x = 0

b = f(x₀) − f′(x₀)·x₀ = 7.5 − 2·1 = 5.5

Answer

b = 5.5
7.Numerical methods

Answer: S = 0.838

Numerical integration: split [a, b] into n strips of width h = (b − a)/n with nodes x₀ … xₙ. Trapezoid rule: T = (h/2)[f₀ + 2f₁ + 2f₂ + … + 2fn−1 + fₙ]. Simpson's rule (n even): S = (h/3)[f₀ + 4f₁ + 2f₂ + 4f₃ + … + 4fn−1 + fₙ]. The trapezoid error shrinks like h² (bound (b − a)h²·M/12 with M = max|f″|), Simpson's like h⁴, so Simpson is usually far more accurate for the same nodes.

ixᵢf(xᵢ)weight000110.50.2474044210.841471231.50.778073442−0.7568021

Nodes and values

h = 0.5
Σ wᵢfᵢ = 0 + 4·0.247404 + 2·0.841471 + 4·0.778073 − 0.756802 = 5.028048

Simpson's rule

S = (0.5/3)·5.028048 = 0.838

Answer

S = 0.838

This integral has no elementary antiderivative, which is exactly when a numerical rule is needed.

8.Numerical methods

Answer: y3 = 0.8201

Numerical solution of y′ = f(t, y): Euler's method steps along the slope at the start of each step: yn+1 = yₙ + h·f(tₙ, yₙ). Heun's method (improved Euler) averages the slope at the start and at an Euler prediction: k₁ = f(tₙ, yₙ), k₂ = f(tₙ + h, yₙ + h·k₁), yn+1 = yₙ + (h/2)(k₁ + k₂). The classical Runge–Kutta method (RK4) combines four slopes: yn+1 = yₙ + (h/6)(k₁ + 2k₂ + 2k₃ + k₄). The global error of Euler is proportional to h, Heun's to h², RK4's to h⁴.

ntₙyₙf(tₙ, yₙ)yₙ₊₁000.510.610.10.61.0599640.70599620.20.7059961.1407310.820069

Euler steps

y₁ = 0.5 + 0.1·(1) = 0.6
y₂ = 0.6 + 0.1·(1.059964) = 0.705996
y₃ = 0.705996 + 0.1·(1.140731) = 0.820069
00.10.20.30.60.8ty

Graph

y3 = 0.8201

Answer

y3 = 0.8201

ExamProblems · examproblems.com/courses/differential-equations