Number systems
- Place values
- binary 2k, octal 8k, hex 16k
- To decimal
- Σ dk·bk
- From decimal
- divide by the base, read the remainders bottom-up
- Hex ↔ binary
- one hex digit = 4 bits
- Two’s complement
- invert the bits and add 1
Digital Electronics: cram pack
Formula sheets, the key method steps for every topic and 6 practice problems, with full solutions at the back.
1Formulas and methods
Digital logic: gates, K-maps & flip-flops
- Basic gates
- A·B, A + B, A′, (A·B)′, (A + B)′, A ⊕ B
- Boolean rules
- X + X′ = 1, X·X′ = 0, X + XY = X, XY + XY′ = X
- De Morgan
- (X·Y)′ = X′ + Y′, (X + Y)′ = X′·Y′
- Karnaugh map order
- 00, 01, 11, 10 (Gray code)
- Group of 2ᵏ cells
- loses k variables
- 4-to-1 multiplexer
- F = A′B′I0 + A′BI1 + AB′I2 + ABI3
- Flip-flops
- D: Q⁺ = D, T: Q⁺ = T ⊕ Q, JK: Q⁺ = JQ′ + K′Q
- Counters
- n-bit: 2ⁿ states; mod-N: smallest n with 2ⁿ ≥ N; fout = fclk/N
- Ripple counter
- fmax = 1/(n·tpd)
- Ring and Johnson counters
- n and 2n states
Method
- For a circuit, work from the inputs to the output one gate at a time and write the value on every wire, or write its expression and fill in the truth table.
- For simplification, put the 1s (and the don’t-cares as X) into a Karnaugh map with Gray-code rows and columns: 00, 01, 11, 10.
- Cover the 1s with as few and as large groups of 1, 2, 4, 8 or 16 cells as possible, wrapping round the edges; each group is one product term made of the variables that stay constant. Group the 0s for the POS form.
- For flip-flops and counters, read the inputs at each active clock edge, write the state after every edge, and remember that an n-bit counter wraps round after 2ⁿ states.
Data acquisition & sampling
- Nyquist criterion
- fs > 2·fmax, fN = fs/2
- Alias frequency
- fa = |f − k·fs|, k = round(f/fs)
- Step size
- 1 LSB = VFSR/2ᴺ
- Quantisation error (rounding)
- ±½ LSB
- Truncating ADC code
- D = ⌊Vin/LSB⌋
- Bits for a resolution r
- 2ᴺ ≥ span/r
- Ideal SQNR, full-scale sine
- SQNR = 6.02·N + 1.76 dB
- Data rate
- channels × fs × N bit/s
- Multiplexed ADC
- fs = 1/(n·(tc + tset))
- UART
- Tb = 1/baud; 8N1 = 10 bits per byte; bytes/s = baud/bits per frame
- Baud rate divider
- baud = fclk/(16·D)
Method
- Write down what is given: sampling rate, signal frequencies, number of bits, input range, baud rate.
- For sampling questions, compare each frequency with fs/2; a higher frequency appears at fa = |f − k·fs| with the nearest multiple of fs.
- For resolution questions, find 1 LSB = VFSR/2ᴺ, or the smallest N with 2ᴺ ≥ span/resolution.
- For data rates and UART links, count everything that is sent: channels, samples per second, bits or whole bytes per sample, and the start, parity and stop bits of every frame.
2Practice problems
1.Number systemsMedium
Set the bits so they store −59 in 8-bit two's complement. Read as an unsigned number, what is the pattern's value U?
N = −598 bit
U =
2.Number systemsHard
Set the bits to the 8-bit result of 0101 0111 << 1. What is the result's value R in decimal?
0101 0111<< 1
R =
3.Digital logic: gates, K-maps & flip-flopsMedium
A 4-to-1 multiplexer has its select inputs S₁ = A and S₀ = B, and its data inputs tied to I₀ = 0, I₁ = C′, I₂ = C, I₃ = C. For how many of the 8 combinations of A, B and C is the output F = 1? Find N.
I₀ = 0I₁ = C′I₂ = CI₃ = C
N =
4.Digital logic: gates, K-maps & flip-flopsHard
A 4-bit shift register Q₃Q₂Q₁Q₀ holds 1101. At every clock edge the bits shift one place to the right (Q₃ → Q₂ → Q₁ → Q₀, Q₀ is lost) and the serial input enters Q₃. The serial input is 0, 1, 0, 0 at the 4 edges. Give the final state Q = Q₃Q₂Q₁Q₀ as a decimal number.
Q₃Q₂Q₁Q₀ = 11010, 1, 0, 0
Q =
5.Data acquisition & samplingMedium
A recorder samples 8 channels at 20 kHz each with a 12-bit ADC. Each sample is stored in whole bytes. Find the memory M needed for a 15 min recording, in MB (1 MB = 10⁶ bytes).
n = 8fs = 20 kHzN = 12t = 15 min
M = MB
6.Data acquisition & samplingHard
A 24-bit ADC streams every sample over a UART at 115200 baud, format 8E1 (start bit, 8 data bits, even parity, 1 stop bit). Each sample is sent as 3 whole byte(s) and the link is busy all the time. Find the highest signal frequency fmax that can be sampled without aliasing, in Hz.
baud = 115200 BdN = 248E1
fmax = Hz
3Solutions
1.Number systems
Answer: U = 197
Setting bits: each bit is worth a power of two (128, 64, …, 1). One hex digit is exactly four bits, and in 8-bit two's complement the leftmost bit is worth −128. Bitwise operations work on each bit position separately.
Invert and add one
59 = 0011 1011
inverted: 1100 0100
+1 → 1100 0101
Read it as unsigned
1100 0101₂ = 256 − 59 = 197
Answer
U = 197
2.Number systems
Answer: R = 174
Setting bits: each bit is worth a power of two (128, 64, …, 1). One hex digit is exactly four bits, and in 8-bit two's complement the leftmost bit is worth −128. Bitwise operations work on each bit position separately.
Bit by bit
Shifting left by 1 moves every bit 1 places to the left; bits that fall off the left end are lost and zeros come in on the right.
0101 0111 << 1
= 1010 1110
Value of the result
1010 1110₂ = 174
Answer
R = 174
3.Digital logic: gates, K-maps & flip-flops
Answer: N = 3
Multiplexer: a 2ⁿ-to-1 multiplexer passes one of its data inputs to the output; the select lines, read as a binary number, pick which one. For a 4-to-1 MUX with selects S₁S₀ = AB, F = A′B′·I₀ + A′B·I₁ + AB′·I₂ + AB·I₃. Tying the data inputs to 0, 1, C or C′ makes the MUX produce any function of A, B and C, which is a common way to build logic with one chip.
Output expression
F = A′BC′ + AB′C + ABC
Rows with F = 1
ABC = 010, 101, 111
N = 3
Answer
N = 3
4.Digital logic: gates, K-maps & flip-flops
Answer: Q = 2
Flip-flops and counters: a flip-flop changes only at the active clock edge. D copies its input (Q⁺ = D); T toggles when T = 1; JK holds for 00, resets for 01, sets for 10 and toggles for 11. An n-bit binary counter has 2ⁿ states and counts modulo 2ⁿ; a mod-N counter goes 0, 1, …, N − 1 and back to 0, and needs the smallest n with 2ⁿ ≥ N flip-flops. Each stage of a ripple counter halves the frequency, so the last output of a mod-N counter runs at fclk/N. A Johnson counter of n flip-flops has 2n states, a ring counter n.
State after every edge
1101 → 0110 → 1011 → 0101 → 0010
Decimal value
0010₂ = 2
Answer
Q = 2
5.Data acquisition & sampling
Answer: M = 288 MB
Data rates: every channel delivers fs samples per second of N bits, so the raw rate is channels × fs × N bit/s. In memory a sample takes whole bytes (a 12-bit sample is stored in 2 bytes), so the memory for a recording is channels × fs × bytes per sample × time. A multiplexed ADC converts the channels one after another: each conversion (with settling) takes t, so one round of n channels takes n·t and each channel is sampled at 1/(n·t).
Bytes per sample
⌈12/8⌉ = 2 B
Byte rate
8·20000·2 = 320000 B/s
Memory
M = 320000·900 = 2.88 × 10⁸ B = 288 MB
Answer
M = 288 MB
6.Data acquisition & sampling
Answer: fmax = 1745 Hz
UART: an asynchronous serial link sends each byte as a frame: one start bit (low), the data bits, an optional parity bit and one or two stop bits (high). The baud rate is the number of bits per second, so one bit lasts Tb = 1/baud and a frame of n bits lasts n/baud. The common 8N1 format has 10 bits per byte. The baud generator divides the clock: baud = fclk/(16·D) with a whole number D, so the real baud rate differs slightly from the target; an error below about 2 % is usually acceptable.
Bits per sample on the line
3·11 = 33 bit
Highest sampling rate
fs,max = 115200/33 = 3491 Hz
Nyquist limit
fmax = 3491/2 = 1745 Hz
Answer
fmax = 1745 Hz
ExamProblems · examproblems.com/courses/digital-electronics