Number systems
- Place values
- binary 2k, octal 8k, hex 16k
- To decimal
- Σ dk·bk
- From decimal
- divide by the base, read the remainders bottom-up
- Hex ↔ binary
- one hex digit = 4 bits
- Two’s complement
- invert the bits and add 1
Digital Electronics: cram pack
Formula sheets, the key method steps for every topic and 6 practice problems, with full solutions at the back.
1Formulas and methods
Digital logic: gates, K-maps & flip-flops
- Basic gates
- A·B, A + B, A′, (A·B)′, (A + B)′, A ⊕ B
- Boolean rules
- X + X′ = 1, X·X′ = 0, X + XY = X, XY + XY′ = X
- De Morgan
- (X·Y)′ = X′ + Y′, (X + Y)′ = X′·Y′
- Karnaugh map order
- 00, 01, 11, 10 (Gray code)
- Group of 2ᵏ cells
- loses k variables
- 4-to-1 multiplexer
- F = A′B′I0 + A′BI1 + AB′I2 + ABI3
- Flip-flops
- D: Q⁺ = D, T: Q⁺ = T ⊕ Q, JK: Q⁺ = JQ′ + K′Q
- Counters
- n-bit: 2ⁿ states; mod-N: smallest n with 2ⁿ ≥ N; fout = fclk/N
- Ripple counter
- fmax = 1/(n·tpd)
- Ring and Johnson counters
- n and 2n states
Method
- For a circuit, work from the inputs to the output one gate at a time and write the value on every wire, or write its expression and fill in the truth table.
- For simplification, put the 1s (and the don’t-cares as X) into a Karnaugh map with Gray-code rows and columns: 00, 01, 11, 10.
- Cover the 1s with as few and as large groups of 1, 2, 4, 8 or 16 cells as possible, wrapping round the edges; each group is one product term made of the variables that stay constant. Group the 0s for the POS form.
- For flip-flops and counters, read the inputs at each active clock edge, write the state after every edge, and remember that an n-bit counter wraps round after 2ⁿ states.
Data acquisition & sampling
- Nyquist criterion
- fs > 2·fmax, fN = fs/2
- Alias frequency
- fa = |f − k·fs|, k = round(f/fs)
- Step size
- 1 LSB = VFSR/2ᴺ
- Quantisation error (rounding)
- ±½ LSB
- Truncating ADC code
- D = ⌊Vin/LSB⌋
- Bits for a resolution r
- 2ᴺ ≥ span/r
- Ideal SQNR, full-scale sine
- SQNR = 6.02·N + 1.76 dB
- Data rate
- channels × fs × N bit/s
- Multiplexed ADC
- fs = 1/(n·(tc + tset))
- UART
- Tb = 1/baud; 8N1 = 10 bits per byte; bytes/s = baud/bits per frame
- Baud rate divider
- baud = fclk/(16·D)
Method
- Write down what is given: sampling rate, signal frequencies, number of bits, input range, baud rate.
- For sampling questions, compare each frequency with fs/2; a higher frequency appears at fa = |f − k·fs| with the nearest multiple of fs.
- For resolution questions, find 1 LSB = VFSR/2ᴺ, or the smallest N with 2ᴺ ≥ span/resolution.
- For data rates and UART links, count everything that is sent: channels, samples per second, bits or whole bytes per sample, and the start, parity and stop bits of every frame.
2Practice problems
1.Number systemsMedium
Set the bits so they store −60 in 8-bit two's complement. Read as an unsigned number, what is the pattern's value U?
N = −608 bit
U =
2.Number systemsHard
Set the bits to the 8-bit result of 0100 0011 OR 1101 0110. What is the result's value R in decimal?
0100 0011OR1101 0110
R =
3.Digital logic: gates, K-maps & flip-flopsMedium
Simplify F = B′C + B′C′ + AB′C′ to its minimal sum-of-products form. How many literals L does the simplified expression contain?
F = B′C + B′C′ + AB′C′
L =
4.Digital logic: gates, K-maps & flip-flopsHard
A positive-edge-triggered T flip-flop starts with Q = 0 and receives the inputs shown. Click the first clock edge at which Q goes from 1 back to 0.
Q₀ = 0T
- 1clock edge 1
- 2clock edge 2
- 3clock edge 3
- 4clock edge 4
- 5clock edge 5
- 6clock edge 6
5.Data acquisition & samplingMedium
A UART sends bytes at 1200 baud in the format 8E1: 8 data bits, an even parity bit and 1 stop bit(s), plus the start bit. Find the largest number of data bytes per second it can transfer.
baud = 1200 Bd8E1
RB = B/s
6.Data acquisition & samplingHard
A 7.5 kHz square wave is sampled at 50 kHz with no anti-aliasing filter. A square wave contains the odd harmonics 3f₁, 5f₁, 7f₁, … At which frequency fa does its harmonic 7f₁ appear in the sampled data? Give it in kHz.
f₁ = 7.5 kHzfs = 50 kHzharmonic: 7f₁
fa = kHz
3Solutions
1.Number systems
Answer: U = 196
Setting bits: each bit is worth a power of two (128, 64, …, 1). One hex digit is exactly four bits, and in 8-bit two's complement the leftmost bit is worth −128. Bitwise operations work on each bit position separately.
Invert and add one
60 = 0011 1100
inverted: 1100 0011
+1 → 1100 0100
Read it as unsigned
1100 0100₂ = 256 − 60 = 196
Answer
U = 196
2.Number systems
Answer: R = 215
Setting bits: each bit is worth a power of two (128, 64, …, 1). One hex digit is exactly four bits, and in 8-bit two's complement the leftmost bit is worth −128. Bitwise operations work on each bit position separately.
Bit by bit
OR gives 1 where at least one bit is 1.
0100 0011
OR 1101 0110
= 1101 0111
Value of the result
1101 0111₂ = 215
Answer
R = 215
3.Digital logic: gates, K-maps & flip-flops
Answer: L = 1
Boolean algebra: the rules that simplify expressions are X + X′ = 1 and X·X′ = 0, X + X = X, absorption X + X·Y = X, the combining rule X·Y + X·Y′ = X, X + X′Y = X + Y and the consensus theorem XY + X′Z + YZ = XY + X′Z. De Morgan's laws turn (X·Y)′ into X′ + Y′ and (X + Y)′ into X′·Y′. A Karnaugh map applies these rules graphically: every group of two neighbouring cells is one use of XY + XY′ = X.
Minterms of the expression
B′C → m(1, 5)
B′C′ → m(0, 4)
AB′C′ → m(4)
Group and read off
F = B′
Count the literals
L = 1
Answer
L = 1
4.Digital logic: gates, K-maps & flip-flops
Answer: clock edge 4
Flip-flops and counters: a flip-flop changes only at the active clock edge. D copies its input (Q⁺ = D); T toggles when T = 1; JK holds for 00, resets for 01, sets for 10 and toggles for 11. An n-bit binary counter has 2ⁿ states and counts modulo 2ⁿ; a mod-N counter goes 0, 1, …, N − 1 and back to 0, and needs the smallest n with 2ⁿ ≥ N flip-flops. Each stage of a ripple counter halves the frequency, so the last output of a mod-N counter runs at fclk/N. A Johnson counter of n flip-flops has 2n states, a ring counter n.
Q after every edge
A T flip-flop toggles at each rising edge with T = 1 and holds with T = 0.
1: T = 0 → Q = 0
2: T = 1 → Q = 1
3: T = 0 → Q = 1
4: T = 1 → Q = 0
5: T = 1 → Q = 1
6: T = 0 → Q = 1
First change from 1 to 0
clock edge 4
Answer
clock edge 4
5.Data acquisition & sampling
Answer: RB = 109.1 B/s
UART: an asynchronous serial link sends each byte as a frame: one start bit (low), the data bits, an optional parity bit and one or two stop bits (high). The baud rate is the number of bits per second, so one bit lasts Tb = 1/baud and a frame of n bits lasts n/baud. The common 8N1 format has 10 bits per byte. The baud generator divides the clock: baud = fclk/(16·D) with a whole number D, so the real baud rate differs slightly from the target; an error below about 2 % is usually acceptable.
Bits per frame
1 + 8 + 1 + 1 = 11
Byte rate
1200/11 = 109.1 B/s
Answer
RB = 109.1 B/s
6.Data acquisition & sampling
Answer: fa = 2.5 kHz
Sampling: an ADC measures the signal fs times per second. By the Nyquist–Shannon theorem a frequency f is captured correctly only while f < fs/2, the Nyquist (folding) frequency, so the sampling rate must exceed twice the highest signal frequency. A higher frequency is not lost: it shows up as an alias at fa = |f − k·fs|, with the whole number k that brings the result between 0 and fs/2. The samples cannot tell the two apart, so an analogue anti-aliasing filter must remove everything above fs/2 before the ADC.
Harmonic frequency
7f₁ = 7·7.5 kHz = 52.5 kHz
Nearest multiple of the sampling rate
m = round(1.05) = 1
Alias frequency
fa = |52.5 − 1·50| = 2.5 kHz
Answer
fa = 2.5 kHz
The alias lands inside the signal band, where no digital filter can remove it. Only an analogue filter before the ADC helps.
ExamProblems · examproblems.com/courses/digital-electronics